EN IEC 61347-2-14:2018

SLOVENSKI STANDARD
01-julij-2018
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO3RVHEQH]DKWHYH]DHQRVPHUQR
LQDOLL]PHQLþQRQDSDMDQHHOHNWURQVNHNUPLOQHVWLNDOQHQDSUDYH]DIOXRUHVFHQþQH
LQGXNFLMVNHVLMDONH,(&
Lamp controlgear - Part 2-14: Particular requirements for d.c. and/or a.c. supplied
electronic controlgear for fluorescent induction lamps (IEC 61347-2-14:2018)
Ta slovenski standard je istoveten z: EN IEC 61347-2-14:2018
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61347-2-14

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2018
ICS 29.140.99
English Version
Lamp controlgear - Part 2-14: Particular requirements for DC
and/or AC supplied electronic controlgear for fluorescent
induction lamps
(IEC 61347-2-14:2018)
Appareillages de lampes - Partie 2-14: Exigences Geräte für Lampen - Teil 2-14: Besondere Anforderungen
particulières pour les appareillages électroniques alimentés an gleich- und/oder wechselstromversorgte elektronische
en courant continu et/ou alternatif pour les lampes Betriebsgeräte für Induktions-Leuchtstofflampen
fluorescentes à induction (IEC 61347-2-14:2018)
(IEC 61347-2-14:2018)
This European Standard was approved by CENELEC on 2018-04-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-14:2018 E

European foreword
The text of document 34C/1374/FDIS, future edition 1 of IEC 61347-2-14, prepared by IEC/SC 34C:
"Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61347-2-14:2018.

The following dates are fixed:
(dop) 2019-01-03
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-04-03
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61347-2-14:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60598-2-22 NOTE Harmonized as EN 60598-2-22.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60929 2011 AC and/or DC-supplied electronic control EN 60929 2011
gear for tubular fluorescent lamps -
Performance requirements
- -  + AC 2011
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirement
+ A1 2017  + A1 2018
IEC 61347-2-7 2011 Lamp controlgear -- Part 2-7: Particular EN 61347-2-7 2012
requirements for battery supplied electronic
controlgear for emergency lighting (self-
contained)
+ A1 2017  - -
IEC 61547 -  Equipment for general lighting purposes - EN 61547 -
EMC immunity requirements
IEC 62532 2011 Fluorescent induction lamps - Safety EN 62532 2011
specifications
IEC 62639 2012 Fluorescent induction lamps - Performance EN 62639 2012
specification
IEC 61347-2-14 ®
Edition 1.0 2018-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lamp controlgear –
Part 2-14: Particular requirements for DC and/or AC supplied electronic

controlgear for fluorescent induction lamps

Appareillages de lampes –
Partie 2-14: Exigences particulières pour les appareillages électroniques

alimentés en courant continu et/ou alternatif pour les lampes fluorescentes à

induction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-5448-6

– 2 – IEC 61347-2-14:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 9
5 General notes on tests . 9
6 Classification . 9
7 Marking . 9
7.1 General . 9
7.2 Mandatory markings . 9
7.3 Information to be provided, if applicable . 10
8 Protection against accidental contact with live parts . 10
9 Terminals . 10
10 Provisions for earthing . 10
11 Moisture resistance and insulation . 10
12 Electric strength . 10
13 Thermal endurance test for windings . 10
14 Fault conditions . 10
15 Protection of associated components. 11
15.1 Maximum peak voltage under normal operation conditions . 11
15.2 Maximum working voltage under normal and abnormal operating conditions . 11
15.3 Compliance . 11
15.4 Insulation of input terminals of controllable electronic controlgear . 11
16 Abnormal conditions . 12
16.1 Abnormal conditions for DC and/or AC supplied electronic controlgear . 12
16.2 Additional abnormal conditions for DC only electronic controlgear . 12
17 Construction . 12
18 Creepage distances and clearances . 12
19 Screws, current-carrying parts and connections . 12
20 Resistance to heat, fire and tracking . 13
21 Resistance to corrosion . 13
Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock . 14
Annex B (normative) Particular requirements for thermally protected lamp controlgear . 15
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating . 16
Annex D (normative) Requirements for carrying out the heating tests of thermally
protected lamp controlgear . 17
Annex E (normative) Use of constant S other than 4 500 in t tests . 18
w
Annex F (normative) Draught-proof enclosure . 19
Annex G (normative) Explanation of the derivation of the values of pulse voltages . 20
Annex H (normative) Tests. 21

IEC 61347-2-14:2018 © IEC 2018 – 3 –
Annex I (normative) Additional requirements for built-in magnetic ballast with double
or reinforced insulation . 22
Annex J (normative) Particular additional safety requirements for DC and/or AC
supplied electronic controlgear for emergency lighting . 23
J.1 General . 23
J.2 Marking . 23
J.2.1 Mandatory markings . 23
J.2.2 Information to be provided if applicable . 23
J.3 General statement . 23
J.4 Starting conditions . 24
J.5 Operating conditions . 24
J.6 Current . 24
J.7 EMC immunity. 24
J.8 Pulse voltage from central battery systems . 24
J.9 Tests for abnormal conditions . 24
J.10 Temperature cycling test and endurance test . 25
J.11 Functional safety (EBLF) . 25
Annex K (informative) Conformity testing during manufacture . 26
Annex L (normative) Particular additional requirements for controlgear providing SELV . 27
Annex M (informative) Dielectric strength test voltages for controlgear
...