Status
Not Published
Publication Date
24-Mar-2027
Current Stage
5020 - Vote circulated - Formal Approval
Start Date
13-Nov-2026
Due Date
31-Jul-2026
Completion Date
13-Nov-2026

Buy Documents

Draft

EN IEC 60539-1:2023/oprA1:2026

English language (10 pages)
Preview
Preview
e-Library read for
×1 day

EN IEC 60539-1:2023/FprA1:2026 is Amendment 1 to the generic specification for directly heated negative temperature coefficient thermistors. It is a CENELEC/IEC amendment for manufacturers, test laboratories, and specifiers who use NTC thermistors, and it updates definitions, mounting guidance, calculation wording, and several test methods in the base standard.

What does EN IEC 60539-1:2023/FprA1:2026 specify?

EN IEC 60539-1:2023/FprA1:2026 specifies changes to the generic specification for directly heated negative temperature coefficient thermistors. In practice, it tells readers what wording, formulas, and test procedures in the base document are being revised so that product specification and verification stay aligned.

The document is organized as an amendment to the IEC text. It touches the foreword material and then revises Clause 3.36, Clause 5.4.3.2, Clause 6.8.2, and several parts of Clause 8 on environmental and endurance testing. The later clauses are the ones most users will apply when planning test programs or writing detail specifications.

What are the key requirements of EN IEC 60539-1:2023/FprA1:2026?

Definitions, mounting, and measurement

  • Clause 3.36 revises the definition of thermal time constant by cooling after self-heating as the time needed for a thermistor to cool by 63.2 % of its self-heating temperature rise in a defined medium.
    This matters because it fixes how thermal response is interpreted and compared between products.

  • Clause 5.4.3.2 changes the wave soldering wording to require silver-bearing eutectic Sn/Pb solder with non-activated flux.
    For production and qualification work, this means the solder system used for board mounting is not left open-ended.

  • Clause 6.8.2 replaces the initial measurement formula.
    Users who calculate initial thermal behavior need to apply the revised equation exactly as given in the standard.

Environmental and endurance tests

  • Clauses 8.1, 8.2, 8.3, 8.4, and 8.5 revise the general structure of the rapid change of temperature, thermal shock, cold, dry heat, and damp heat steady state tests.
    Each test now uses a common pattern: general clause, test sequence, intermediate measurement, recovery, and final inspection.

  • For those tests, intermediate measurements require removal of load, recovery under standard atmospheric conditions for 1 h to 2 h, measurement of the relevant parameters, and checking the change against the limit in the detail specification.
    The interval outside test conditions for any thermistor must not exceed 12 h, so test planning and scheduling matter.

  • Clauses 8.6.2, 8.6.3, and 8.6.6 revise endurance and capacitance-related procedures for inrush current-limiting thermistors only.
    The amendment specifies when intermediate measurements are taken, how long recovery lasts, and when final inspection is performed, which is important for endurance qualification.

  • Clause 8.9.4 updates final inspection for insulated types.
    Insulation resistance is measured in accordance with Clause 6.3 and must meet the value given in the detail specification.

What terms does EN IEC 60539-1:2023/FprA1:2026 define?

  • NTC thermistor - a negative temperature coefficient thermistor, meaning its resistance changes with temperature in the direction described by the standard.
  • Detail specification - the product-specific document that gives the limits, measurements, and acceptance values for a particular thermistor type.
  • Thermal time constant by cooling after self-heating - the time needed for a thermistor to cool to a defined fraction of its self-heating temperature rise.
  • Intermediate measurement - a measurement taken during a test sequence after recovery from the test condition and before the test is completed.
  • Recovery - the period when the thermistor is allowed to return to standard atmospheric conditions before the next step or final inspection.
  • Imax - the maximum current used in the endurance tests for inrush current-limiting thermistors.

Who uses EN IEC 60539-1:2023/FprA1:2026?

EN IEC 60539-1:2023/FprA1:2026 is used by thermistor manufacturers, component test laboratories, and engineers who write or verify detail specifications. Quality managers and procurement teams use it to check that a thermistor product has been tested with the correct mounting, environmental, and endurance procedures. It is also relevant to certification and conformity assessment work where insulation resistance, recovery behavior, or endurance performance must be documented.

What changed in EN IEC 60539-1:2023/FprA1:2026 from the previous edition?

EN IEC 60539-1:2023/FprA1:2026 is Amendment 1 to IEC 60539-1:2023. The amendment states these changes:

  • revised the definition in Clause 3.36
  • changed the wave soldering wording in Clause 5.4.3.2
  • replaced the formula in Clause 6.8.2
  • reorganized and updated the rapid change of temperature, thermal shock, cold, dry heat, and damp heat procedures in Clause 8
  • revised endurance and capacitance test wording for inrush current-limiting thermistors
  • updated final inspection wording for insulated types in Clause 8.9.4

Which standards are used with EN IEC 60539-1:2023/FprA1:2026?

EN IEC 60539-1:2023 is the base document that this amendment updates. Readers apply this amendment together with the base Part 1 when using the revised definition, formula, and test methods.

What does the EN IEC 60539-1:2023/FprA1:2026 document contain?

EN IEC 60539-1:2023/FprA1:2026 contains the amended text for several clauses rather than a full standalone specification. It revises a definition, a mounting requirement, a calculation formula, and multiple test procedures for thermal and environmental performance.

The document also contains updated step-by-step wording for intermediate measurements, recovery periods, and final inspections in several tests. Those sections are used when preparing test plans, running qualification tests, and checking conformance to a detail specification.

For inrush current-limiting thermistors, the amendment includes endurance-related procedures at room temperature and a maximum permissible capacitance test. For insulated types, it updates the final inspection wording for insulation resistance measurement.

Relations

Effective Date
03-Jun-2025

Buy Documents

Draft

EN IEC 60539-1:2023/oprA1:2026

English language (10 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

EN IEC 60539-1:2023/FprA1:2026 is a draft published by CLC. Its full title is "Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification". This standard covers: Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification

Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification

EN IEC 60539-1:2023/FprA1:2026 is classified under the following ICS (International Classification for Standards) categories: 31.040.30 - Thermistors. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60539-1:2023/FprA1:2026 has the following relationships with other standards: It is inter standard links to EN IEC 60539-1:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN IEC 60539-1:2023/FprA1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN IEC 60539-1:2023/oprA1:2026
01-maj-2026
Neposredno ogrevani termistorji z negativnim temperaturnim koeficientom - 1. del:
Splošna specifikacija - Dopolnilo A1
Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1:
Generic specification
Direkt geheizte temperaturabhängige Widerstände mit negativem
Temperaturkoeffizienten - Teil 1: Fachgrundspezifikation
Thermistances à coefficient de température négatif à chauffage direct - Partie 1:
Spécification générique
Ta slovenski standard je istoveten z: EN IEC 60539-1:2023/prA1:2026
ICS:
31.040.30 Termistorji Thermistors
SIST EN IEC 60539-1:2023/oprA1:2026 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN IEC 60539-1:2023/oprA1:2026

SIST EN IEC 60539-1:2023/oprA1:2026
40/3280/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 60539-1/AMD1 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2026-03-06 2026-05-29
SUPERSEDES DOCUMENTS:
40/3257/CD, 40/3276/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which t hey
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification

PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission
in writing from IEC.
SIST EN IEC 60539-1:2023/oprA1:2026

IEC CDV 60539-1 ED4.1 AMD1 © IEC 2026

1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 DIRECTLY HEATED NEGATIVE TEMPERATURE
5 COEFFICIENT THERMISTORS – Part 1: Generic specification
7 AMENDMENT 1
9 FOREWORD
10 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
11 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -operation on all
12 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities , IEC
13 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and G uides
14 (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Com mittee
15 interested in the subject dealt with may participate in this preparatory work. International, governmental and non -governmental
16 organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Org anization
17 for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
18 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
19 opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committee s.
20 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that
21 sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be
22 held responsible for the way in which they are used or for any misinterpretation by any end user.
23 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to th e
24 maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the
25 corresponding national or regional publication shall be clearly indicated in the latter.
26 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment ser vices
27 and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent
28 certification bodies.
29 6) All users should ensure that they have the latest edition of this publication.
30 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
31 technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
32 whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or
33 reliance upon, this IEC Publication or any other IEC Publications.
34 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for
35 the correct application of this publication.
36 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall
37 not be held responsible for identifying any or all such patent rights.
39 This amendment to IEC 60539-1 has been prepared by IEC technical committee 40: Capacitors and
40 resistors for electronic equipment.
41 The text of this Amendment is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
43 Full information on the voting for its approval can be found in the report on voting indicated in the above
44 table.
45 The language used for the development of this International Standard is English.
SIST EN IEC 60539-1:2023/oprA1:2026

IEC CDV 60539-1 ED4.1 AMD1 © IEC 2026

46 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in accordance
47 with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available at
48 www.iec.ch/members_experts/refdocs. The main document types developed by IEC are described in
49 greater detail at www.iec.ch/publications.
50 The committee has decided that the contents of this document will remain unchanged until the stability
51 date indicated on the IEC website under webstore.iec.ch in the data related to the specific document. At
52 this date, the document will be
53 • reconfirmed,
54 • withdrawn,
55 • replaced by a revised edition, or
56 • amended.
SIST EN IEC 60539-1:2023/oprA1:2026

IEC CDV 60539-1 ED4.1 AMD1 © IEC 2026

60 DIRECTLY HEATED NEGATIVE TEMPERATURE
61 COEFFICIENT THERMISTORS – Part 1: Generic specification
63 AMENDMENT 1
67 3.36 thermal time constant by cooling after self-heating
69 Change in the first paragraph sentence to be
71 time required for a thermistor to cool by 63,2 % of its temperature excess induced by self-heating, in a
72 defined medium when the current passing through an NTC thermistor in a specified medium is
73 suddenly changed from a non-zero load state to a zero load state.
75 5.4.3 Mounting on board /  5.4.3.2 Wave soldering method
77 Change the sentence in 5.4.3.2 a), first line, to be
79 The solder used shall be silver bearing (1.8 to 2.2 %) eutectic Sn/Pb solder together with non-activated
80 flux,…
82 6.8.2 Initial measurement
84 Replace the formula with this formula
86 T = T – (T – T ) × 0.632
i b b a
88 8.1 Rapid change of temperature
90 Change the sentence and item number to be
92 8.1.1 General
SIST EN IEC 60539-1:2023/oprA1:2026

IEC CDV 60539-1 ED4.1 AMD1 © IEC 2026

93 The method of test shall be conducted as specified in 8.1.2 to 8.1.6.
94 ----------------------------------------------------------------------------------------------------
95 8.1.4 Intermediate measurement
96 If an intermediate measurement is to be carried out, the load shall be removed and the NTC
97 thermistors allowed to recover under standard atmospheric conditions of testing for not less than 1
98 h and not more than 2 h.
99 The appropriate parameter(s) given in the detail specification shall then be measured using
100 the method specified. The change compared with the value(s) measured in 8.1.2 shall not
101 exceed the limit specified in the relevant detail specification.
102 After intermediate measurements, the thermistors shall be returned to the conditions of
103 test. The interval between the removal from, and the return to the conditions of test for any
104 NTC thermistor shall not exceed 12 h.
105 8.1.5 Recovery
106 After completion of the test, the thermistors shall be removed and allowed to recover under
107 standard atmospheric conditions for a period of 1 h to 2 h.
109 8.1.6 Final inspection, measurements and requirements.
112 8.2 Thermal shock
...