EN 60034-18-41:2014/A1:2019

SLOVENSKI STANDARD
01-januar-2020
Električni rotacijski stroji - 18-41. del: Električni izolacijski sistemi brez delne
razelektritve (tip I), uporabljeni v električnih rotacijskih strojih, ki jih napajajo
napetostni pretvorniki - Kvalificiranje in preskusi pri obvladovanju kakovosti (IEC
60034-18-1:2014/A1:2019)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation
systems (Type I) used in rotating electrical machines fed from voltage converters -
Qualification and quality control tests (IEC 60034-18-41:2014/A1:2019)
Drehende elektrische Maschinen - Teil 18-41: Qualifizierung und Qualitätsprüfungen für
teilentladungsfreie elektrische Isoliersysteme (Typ I) in drehenden elektrischen
Maschinen, die von Spannungsumrichtern gespeist werden (IEC 60034-18-
41:2014/A1:2019)
Machines électriques tournantes - Partie 18-41: Systèmes d'isolation électrique sans
décharge partielle (Type I) utilisés dans des machines électriques tournantes alimentées
par des convertisseurs de tension - Essais de qualification et de contrôle qualité (IEC
60034-18-41:2014/A1:2019)
Ta slovenski standard je istoveten z: EN 60034-18-41:2014/A1:2019
ICS:
29.080.30 Izolacijski sistemi Insulation systems
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60034-18-41:2014/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 29.160.01
English Version
Rotating electrical machines - Part 18-41: Partial discharge free
electrical insulation systems (Type I) used in rotating electrical
machines fed from voltage converters - Qualification and quality
control tests
(IEC 60034-18-41:2014/A1:2019)
Machines électriques tournantes - Partie 18-41: Systèmes Drehende elektrische Maschinen - Teil 18-41: Qualifizierung
d'isolation électrique sans décharge partielle (Type I) und Qualitätsprüfungen für teilentladungsfreie elektrische
utilisés dans des machines électriques tournantes Isoliersysteme (Typ I) in drehenden elektrischen
alimentées par des convertisseurs de tension - Essais de Maschinen, die von Spannungsumrichtern gespeist werden
qualification et de contrôle qualité (IEC 60034-18-41:2014/A1:2019)
(IEC 60034-18-41:2014/A1:2019)
This amendment A1 modifies the European Standard EN 60034-18-41:2014; it was approved by CENELEC on 2019-07-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60034-18-41:2014/A1:2019 E

European foreword
The text of document 2/1949/FDIS, future IEC 60034-18-41/A1, prepared by IEC/TC 2 "Rotating
machinery" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-04-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-07-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60034-18-41:2014/A1:2019 was approved by CENELEC as
a European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60034-1 NOTE Harmonized as EN 60034-1

IEC 60034-18-41 ®
Edition 1.0 2019-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Rotating electrical machines –

Part 18-41: Partial discharge free electrical insulation systems (Type I) used in

rotating electrical machines fed from voltage converters – Qualification and

quality control tests
Machines électriques tournantes –

Partie 18-41: Systèmes d’isolation électrique sans décharge partielle (Type I)

utilisés dans des machines électriques tournantes alimentées par des

convertisseurs de tension – Essais de qualification et de contrôle qualité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.160.01 ISBN 978-2-8322-6886-5

– 2 – IEC 60034-18-41:2014/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC Technical Committee 2: Rotating machinery.
The text of this amendment is based on the following documents:
FDIS Report on voting
2/1949/FDIS 2/1957/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
3 Terms and definitions
Replace the existing term and definition 3.19 with the following:
3.19
impulse voltage insulation class
IVIC
peak to peak voltage classes A, B, C, D, S for reliable operation,
assigned by the manufacturer in relation to the rated voltage for a specified converter-driven
machine and indicated in its documentation and, if applicable, on its rating plate
Add the following new terms and definitions:
3.26
maximum allowable terminal voltage
U
IVIC
maximum allowable peak to peak phase to ground voltage in service, according to the IVIC
specification
3.27
test voltage factor
TVF
maximum allowable peak to peak phase to ground voltage in service in units of U , divided by
N
SIST EN 6003
...