iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 630.2.1 S2:1997

(Main)

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to IV: Examples of types of standardized fuses for use by authorized persons

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to IV: Examples of types of standardized fuses for use by authorized persons

Superseded by HD 630.2.1 S3:1998 * D114/118: CLC/BTTF 56-2 disbanded

Niederspannungssicherungen (NH-System) - Teil 2-1: Zusätzliche Anforderungen an Sicherungen zum Gebrauch durch Elektrofachkräfte bzw. elektrotechnisch unterwiesene Personen (Sicherungen überwiegend für den industriellen Gebrauch) - Hauptabschnitte I bis IV: Beispiele von genormten Sicherungstypen zum Gebrauch durch Elektrofachkräfte bzw. elektrotechnisch unterwiesene Personen

Fusibles basse tension - Partie 2-1: Règles supplémentaires pour les fusibles destinés à être utilisés par des personnes habilitées (fusibles pour usages essentiellement industriels) - Sections I à IV: Exemples de fusibles normalisés destinés à être utilisés par des personnes habilitées

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial applications) - Sections I to IV: Examples of types of standardized fuses for use by authorized persons (IEC 60269-2-1:1996, modified)

General Information

Status
Withdrawn
Publication Date
21-Jul-1997
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
CLC/SR 32B - Low-voltage fuses
Drafting Committee
IEC/SC 32B - IEC_SC_32B
Parallel Committee
IEC/SC 32B - IEC_SC_32B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Aug-1999
Completion Date
01-Aug-1999
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST HD 630.2.1 S2:1998 - Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) -- Sections I to IV: Examples of types of standardized fuses for use by authorized persons

Relations

Replaced By
HD 630.2.1 S3:1998 - Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses for use by authorized persons
Effective Date
29-Jan-2023

Buy Standard

HD 630.2.1 S2:1998HD 630.2.1 S2:1998
PreviousNext
Standardization document
HD 630.2.1 S2:1998
English language
95 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 630.2.1 S2:1998
01-april-1998
Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by
authorized persons (fuses mainly for industrial applications) - Sections I to IV:
Examples of types of standardized fuses for use by authorized persons (IEC 60269
-2-1:1996, modified)
Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use by
authorized persons (fuses mainly for industrial application) -- Sections I to IV: Examples
of types of standardized fuses for use by authorized persons
Niederspannungssicherungen (NH-System) -- Teil 2-1: Zusätzliche Anforderungen an
Sicherungen zum Gebrauch durch Elektrofachkräfte bzw. elektrotechnisch unterwiesene
Personen (Sicherungen überwiegend für den industriellen Gebrauch) -- Hauptabschnitte
I bis IV: Beispiele von genormten Sicherungstypen zum Gebrauch durch
Elektrofachkräfte bzw. elektrotechnisch unterwiesene Personen
Fusibles basse tension -- Partie 2-1: Règles supplémentaires pour les fusibles destinés à
être utilisés par des personnes habilitées (fusibles pour usages essentiellement
industriels) -- Sections I à IV: Exemples de fusibles normalisés destinés à être utilisés
par des personnes habilitées
Ta slovenski standard je istoveten z: HD 630.2.1 S2:1997
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST HD 630.2.1 S2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 2 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 3 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 4 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 5 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 6 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 7 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 8 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 9 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 10 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 11 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 12 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 13 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 14 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 15 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 16 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 17 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 18 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 19 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 20 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 21 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 22 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 23 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 24 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 25 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 26 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 27 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 28 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 29 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 30 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 31 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 32 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 33 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 34 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 35 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 36 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 37 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 38 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 39 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 40 ----------------------

SIST HD 630.2.1 S2:1998

---------------------- Page: 41 -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
HD 60269-3:2010/A2:2022(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
SIST HD 60269-3:2010/A2:2023

2018-05-14 PC: TC to finalize the finalize Annex ZA, ZZ and Risk assessment

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60269-2:2013/A1:2022(Amendment)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
SIST HD 60269-2:2013/A1:2023

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons: - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system), - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system), - Fuse system C: Fuse-rails (NH fuse system), - Fuse system D: Fuse-bases for busbar mounting (NH fuse system), - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system), - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system), - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system), - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types), - Fuse system I: gU fuse-links with wedge tightening contacts, - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types), - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links; 2. fuse systems A and B: introduction of dimension r for NH fuse-links; 3. addition of new fuse system K: gK fuse-links with contacts for bolted connections. Key Words: fuse systems A to K, requirements for fuses

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-4:2009/A2:2016(Amendment)
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
SIST EN 60269-4:2010/A2:2017

IEC 60269-4:2009 is to be used in conjunction with IEC 60269-1. This Part 4 supplements or modifies the corresonding clauses or subclauses of Part 1. Fuse-links for the protection of semiconductor devices shall comply with aIl requirements of IEC 60269-1, if not otherwise indicated hereinafter, and shall also comply with the supplementary requirements laid down below. This fifth edition cancels and replaces the fourth edition published in 2006. It constitutes a technical revision. The significant technical changes to the fourth edition are: - the introduction of voltage source inverter fuse-links, including test requirements; - coverage of the tests on operating characteristics for a.c. by the breaking capacity tests; - the updating of examples of standardised fuse-links for the protection of semiconductor devices.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-1:2007/A2:2014(Amendment)
Low-voltage fuses - Part 1: General requirements
SIST EN 60269-1:2007/A2:2014
  • Standard – translation
    11 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CEN/TR 15133:2005(Main)
Nomenclature - Collective terms and codes for groups of medical devices
SIST HD 60269-2:2013

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons: - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system), - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system), - Fuse system C: Fuse-rails (NH fuse system), - Fuse system D: Fuse-bases for busbar mounting (NH fuse system), - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system), - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system), - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system), - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types), - Fuse system I: gU fuse-links with wedge tightening contacts, - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types), - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links; 2. fuse systems A and B: introduction of dimension r for NH fuse-links; 3. addition of new fuse system K: gK fuse-links with contacts for bolted connections. Key Words: fuse systems A to K, requirements for fuses

  • Standardization document
    208 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60269-3:2010/A1:2013(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F
SIST HD 60269-3:2010/A1:2013

The contents of the corrigendum of March 2013 and of June 2013 have been included in this copy.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-4:2009/A1:2012(Amendment)
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
SIST EN 60269-4:2010/A1:2012
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-6:2011(Main)
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
SIST EN 60269-6:2011

IEC 60269-6:2010 gives supplementary requirement to those given in IEC 60269-1 for fuse-links for protecting photovoltaic (PV) strings and photovoltaic (PV) arrays in equipment for circuits of nominal voltages up to 1 500 V d.c. This publication is to be read in conjunction with IEC 60269-1:2006.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    31 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60269-3:2010(Main)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F
SIST HD 60269-3:2010

IEC 60269-3:2010 provides supplementary requirements for fuses for use by unskilled persons according to the following fuse systems comply with all subclauses of IEC 60269-1 and with the requirements laid down in the relevant fuse systems. This part is to be used in conjunction with IEC 60269-1, Low-voltage fuses - Part 1: General requirements. This Part 3 supplements or modifies the corresponding clauses or subclauses of Part 1.

  • Standardization document
    157 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-4:2009(Main)
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
SIST EN 60269-4:2010

IEC 60269-4:2009 is to be used in conjunction with IEC 60269-1. This Part 4 supplements or modifies the corresonding clauses or subclauses of Part 1. Fuse-links for the protection of semiconductor devices shall comply with aIl requirements of IEC 60269-1, if not otherwise indicated hereinafter, and shall also comply with the supplementary requirements laid down below. This fifth edition cancels and replaces the fourth edition published in 2006. It constitutes a technical revision. The significant technical changes to the fourth edition are: - the introduction of voltage source inverter fuse-links, including test requirements; - coverage of the tests on operating characteristics for a.c. by the breaking capacity tests; - the updating of examples of standardised fuse-links for the protection of semiconductor devices.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day