EN 61881-1:2011
(Main)Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors
IEC 61881-1:2010 applies to capacitors for power electronics intended to be used on rolling stock. The rated voltage of capacitors is limited to 10 000 V. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. Distinguishes between AC and DC capacitors.
Bahnanwendungen - Betriebsmittel auf Bahnfahrzeugen - Kondensatoren für Leistungselektronik - Teil 1: Papier-/Foliekondensatoren
Applications ferroviaires - Matériel roulant - Condensateurs pour électronique de puissance - Partie 1: Condensateurs papier et film plastique
La CEI 61881-1:2010 s'applique aux condensateurs pour électronique de puissance destinés à être utilisés sur le matériel roulant. La tension assignée des condensateurs est limitée à 10 000 V. La fréquence de fonctionnement des systèmes dans lesquels ces condensateurs sont utilisés atteint généralement jusqu'à 15 kHz, tandis que les fréquences d'impulsion peuvent atteindre de 5 à 10 fois la fréquence de fonctionnement. Une distinction est faite entre les condensateurs pour courant alternatif et ceux pour courant continu.
Železniške naprave - Oprema voznih sredstev - Kondenzatorji za močnostno elektroniko - 1. del: Zahteve, preskusi in splošne informacije (IEC 61881-1:2010)
Ta del IEC 61881 velja za kondenzatorje za močnostno elektroniko, namenjeno uporabi pri voznih sredstvih. Ocenjena napetost kondenzatorjev, zajeta v tem delu, je omejena do 10.000 V. Delovne frekvence sistemov, v katerih so kondenzatorji uporabljeni, so običajno do 15 kHz, medtem ko so pulzne frekvence lahko od 5- do 10-krat večje od delovnih frekvenc. Razlikuje med kondenzatorji z izmeničnim tokom in enosmernim tokom. Štejejo se kot sestavni deli, vgrajeni v ohišja. OPOMBA Ta standard zajema izjemno širok razpon tehnologij kondenzatorjev za različne uporabe: prenapetostna zaščita, filtriranje za enosmerni tok in izmenični tok, komutirana vezja, shranjevanje enosmerne energije, pomožni razsmerniki itd. Primeri so podani v klavzuli 9. Iz tega standarda so izvzeti: – kondenzatorji za obrate z indukcijsko proizvodnjo toplote, ki delujejo pri frekvencah med 40 Hz in 24.000 Hz (glej IEC 60100-1 in 60110-2); – kondenzatorji za uporabo v motorjih in podobno uporabo (glej IEC 60252-1 in IEC 60252-2); – kondenzatorji za uporabo v vezjih za blokiranje enega ali več harmonik v omrežnem napajanju; – majhni kondenzatorji za izmenični tok, kot se uporabljajo v fluorescenčnih lučeh in sijalkah (glej IEC 61048 in 61049); – kondenzatorji za dušenje radijskih motenj (glej IEC 60384-14); – ranžirni kondenzatorji za sisteme z izmeničnih tokom, ki ima ocenjeno napetost na 1000 V (glej IEC 60871-1 in IEC 60871-2); – ranžirni kondenzatorji samo okrevalne vrste za sisteme z izmeničnim tokom, ki imajo ocenjeno napetost do vključno z 1000 V (glej IEC 60831-1 in IEC 60831-2); – ranžirni kondenzatorji, ki niso samo okrevalne vrste, za sisteme z izmeničnim tokom, ki imajo ocenjeno napetost do vključno z 1000 V (glej IEC 60931-1 in IEC 60931-2); – serijski kondenzatorji za sisteme napajanja (glej IEC 60143-1, IEC 60143-2 in IEC 60143-3); - sklopni kondenzatorji in ločevalniki kondenzatorjev (glej IEC 60358); - kondenzatorji za aplikacije, ki potrebujejo shranjevanje energije/razelektritev pri visokih napetostih kot fotokopirni stroji in laserji; – kondenzatorji za mikrovalovne pečice; - kondenzatorji za močnostno elektroniko (glej IEC 61071).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2011
1DGRPHãþD
SIST EN 61881:2001
äHOH]QLãNHQDSUDYH2SUHPDYR]QLKVUHGVWHY.RQGHQ]DWRUML]DPRþQRVWQR
HOHNWURQLNRGHO =DKWHYHSUHVNXVLLQVSORãQHLQIRUPDFLMH ,(&
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part
1: Requirements, tests and general information (IEC 61881-1:2010)
Bahnanwendungen - Betriebsmittel auf Bahnfahrzeugen - Kondensatoren für
Leistungselektronik - Teil 1: Papier-/Foliekondensatoren (IEC 61881-1:2010)
Applications ferroviaires - Matériel roulant - Condensateurs pour électronique de
puissance - Partie 1: Exigences, essais et informations générales (CEI 61881-1:2010)
Ta slovenski standard je istoveten z: EN 61881-1:2011
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61881-1
NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM
ICS 45.060 Supersedes EN 61881:1999
English version
Railway applications -
Rolling stock equipment -
Capacitors for power electronics -
Part 1: Paper/plastic film capacitors
(IEC 61881-1:2010)
Applications ferroviaires - Bahnanwendungen -
Matériel roulant - Betriebsmittel auf Bahnfahrzeugen -
Condensateurs pour électronique de Kondensatoren für Leistungselektronik -
puissance - Teil 1: Papier-/Foliekondensatoren
Partie 1: Condensateurs papier et film (IEC 61881-1:2010)
plastique
(CEI 61881-1:2010)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61881-1:2011 E
Foreword
The text of document 9/1405/FDIS, future edition 1 of IEC 61881-1, prepared by IEC TC 9, Electrical
equipment and systems for railways, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 61881-1 on 2011-01-02.
This European Standard supersedes EN 61881:1999.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61881-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60077-1:1999 NOTE Harmonized as EN 60077-1:2002 (modified).
IEC 60077-2:1999 NOTE Harmonized as EN 60077-2:2002 (modified).
IEC 60110-1:1998 NOTE Harmonized as EN 60110-1:1998 (not modified).
IEC 60146-1-1:2009 NOTE Harmonized as EN 60146-1-1:2009 (not modified).
IEC 60384-14:2005 NOTE Harmonized as EN 60384-14:2005 (not modified).
IEC 60664-1:2007 NOTE Harmonized as EN 60664-1:2007 (not modified).
IEC 60831-1:1996 NOTE Harmonized as EN 60831-1:1996 (not modified).
IEC 60831-2:1995 NOTE Harmonized as EN 60831-2:1996 (not modified).
IEC 60871-1:2005 NOTE Harmonized as EN 60871-1:2005 (not modified).
IEC 60931-1:1996 NOTE Harmonized as EN 60931-1:1996 (not modified).
IEC 60931-2:1995 NOTE Harmonized as EN 60931-2:1996 (not modified).
IEC 61071 NOTE Harmonized as EN 61071.
IEC 61287-1:2005 NOTE Harmonized as EN 61287-1:2006 (not modified).
__________
- 3 - EN 61881-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-20 - Environmental testing - EN 60068-2-20 -
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads
IEC 60068-2-21 - Environmental testing - EN 60068-2-21 -
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices
IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60269-1 - Low-voltage fuses - EN 60269-1 -
Part 1: General requirements
IEC 60695-2-11 - Fire hazard testing - EN 60695-2-11 -
Part 2-11: Glowing/hot-wire based test
methods - Glow-wire flammability test method
for end-products
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60721-3-5 - Classification of environmental conditions - EN 60721-3-5 -
Part 3: Classification of groups of
environmental parameters and their severities
- Section 5: Ground vehicle installations
IEC 61373 - Railway applications - Rolling stock equipment EN 61373 -
- Shock and vibration tests
IEC 62491 - Industrial systems, installations and EN 62491 -
equipment and industrial products - Labelling
of cables and cores
IEC 62497-1 - Railway applications - Insulation - -
coordination -
Part 1: Basic requirements - Clearances and
creepage distances for all electrical and
electronic equipment
IEC 61881-1 ®
Edition 1.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 1: Paper/plastic film capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 1: Condensateurs papier et film plastique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 45.060 ISBN 978-2-88912-094-9
– 2 – 61881-1 © IEC:2010
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references.8
3 Terms and definitions .8
4 Service conditions.13
4.1 Normal service conditions.13
4.1.1 Altitude .13
4.1.2 Temperature.13
4.1.3 Operating temperature with forced ventilation.13
4.2 Unusual service conditions .13
5 Quality requirements and tests.14
5.1 Test requirements.14
5.1.1 General .14
5.1.2 Test conditions .14
5.2 Classification of tests.14
5.2.1 Routine tests .14
5.2.2 Type tests.15
5.2.3 Acceptance tests .15
5.2.4 Summary of tests.16
5.3 Capacitance and tan δ measurements (routine test) .16
5.3.1 Measuring procedure .16
5.3.2 Capacitance tolerances.17
5.3.3 Loss requirements (tan δ) .17
5.4 Capacitor loss tangent (tan δ) measurement (type test) .17
5.4.1 Measurements .17
5.4.2 Loss requirements .17
5.5 Voltage test between terminals .17
5.5.1 General .17
5.5.2 Routine test .18
5.5.3 Type test .18
5.6 AC voltage test between terminals and case .18
5.6.1 Routine test .18
5.6.2 Type test .19
5.7 Test of internal discharge device.19
5.8 Sealing test .19
5.9 Surge discharge test.19
5.10 Thermal stability test.20
5.10.1 General .20
5.10.2 Measuring procedure .20
5.11 Self-healing test.21
5.12 Resonance frequency measurement .21
5.13 Environmental testing .21
5.13.1 Change of temperature .21
5.13.2 Damp heat, steady state .21
5.14 Mechanical testing.22
5.14.1 Mechanical tests of terminals .22
61881-1 © IEC:2010 – 3 –
5.14.2 External inspection .23
5.14.3 Vibration and shocks.23
5.15 Endurance test .23
5.15.1 Conditioning of the units before the test .23
5.15.2 Initial capacitance and loss factor measurements.23
5.15.3 Endurance test .23
5.15.4 Final capacitance and tan δ measurement.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.