EN 60875-1:2010

SLOVENSKI STANDARD
01-september-2010
1DGRPHãþD
SIST EN 60875-1:2002
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9DORYQRGROåLQVNRQHVHOHNWLYQL
RSWLþQLVNORSQLNLGHO5RGRYQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Non-wavelength-selective
fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -
wellenlängenunabhängige Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation
(IEC 60875-1:2010)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Dispositifs de
couplage pour fibres optiques ne dépendant pas de la longueur d’onde - Partie 1:
Spécification générique (CEI 60875-1:2010)
Ta slovenski standard je istoveten z: EN 60875-1:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60875-1
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 60875-1:2001

English version
Fibre optic interconnecting devices and passive components -
Non-wavelength-selective fibre optic branching devices -
Part 1: Generic specification
(IEC 60875-1:2010)
Dispositifs d’interconnexion  Lichtwellenleiter - Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Dispositifs de couplage pour fibres wellenlängenunabhängige
optiques ne dépendant pas de la longueur Lichtwellenleiter-Verzweiger -
d’onde - Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 60875-1:2010)
(CEI 60875-1:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60875-1:2010 E
Foreword
The text of document 86B/2986/FDIS, future edition 5 of IEC 60875-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60875-1 on 2010-07-01.
This European Standard supersedes EN 60875-1:2001.
This EN 60875-1:2010 constitutes a technical revision. The changes with respect to EN 60875-1:2001 are
to delete the clause of Quality assessment procedures and reconsider the constitution of this standard.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60875-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 series NOTE  Harmonized in EN 60068 series (not modified).
IEC 60874 series NOTE  Harmonized in EN 60874 series (not modified).
IEC 60869-1 NOTE  Harmonized as EN 60869-1.
IEC 60974 series NOTE  Harmonized in EN 60974 series (partially modified).
IEC 61300-1 NOTE  Harmonized as EN 61300-1.
IEC 61300-2 series NOTE  Harmonized in EN 61300-2 series (not modified).
IEC 61300-3 series NOTE  Harmonized in EN 61300-3 series (not modified).
IEC 61753 NOTE  Harmonized as EN 61753.
IEC 61754-4 NOTE  Harmonized as EN 61754-4.
IEC 61754-13 NOTE  Harmonized as EN 61754-13.
IEC 61754-15 NOTE  Harmonized as EN 61754-15.
IEC 62005 series NOTE  Harmonized in EN 62005 series (not modified).
__________
- 3 - EN 60875-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication

IEC 60617-SN - Graphical symbols for diagrams - -

IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825 Series Safety of laser products EN 60825 Series

IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC/TR 61930 - Fibre optic graphical symbology - -

IEC Guide 102 - Electronic components - Specification - -
structures for quality assessment
(Qualification approval and capability
approval)
IECQ 01 - IEC Quality Assessment System - -
for Electronic Components (IECQ) - Basic
Rules
IECQ 001002-3 - IEC Quality Assessment System - -
for Electronic Components (IECQ) - Rules of
Procedure - Part 3: Approval procedures

ISO 129-1 - Technical drawings - Indication of dimensions - -
and tolerances -
Part 1: General principles
ISO 286-1 - ISO system of limits and fits - EN ISO 286-1 -
Part 1: Bases of tolerances, deviations
and fits
ISO 1101 - Geometrical Product Specifications (GPS) - EN ISO 1101 -
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out

ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 60875-1 ®
Edition 5.0 2010-04
INTERNATIONAL
STANDARD
colour
inside
Fibre optic interconnecting devices and passive components – Non-wavelength-
selective fibre optic branching devices –
Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 33.180.20 ISBN 978-2-88910-315-7
– 2 – 60875-1 © IEC:2010(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references.6
3 Terms and definitions .7
3.1 Basic term definitions .7
3.2 Component definitions .8
3.3 Performance parameter definitions .9
4 Requirements .10
4.1 Classification.10
4.1.1 General .10
4.1.2 Types .11
4.1.3 Style .11
4.1.4 Variant.12
4.1.5 Assessment level.12
4.1.6 Normative reference extensions .13
4.2 Documentation .14
4.2.1 Symbols.14
4.2.2 Specification system .14
4.2.3 Drawings .15
4.2.4 Measurements .16
4.2.5 Test data sheets .16
4.2.6 Instructions for use .16
4.3 Standardization system.16
4.3.1 Interface standards .16
4.3.2 Performance standards.17
4.3.3 Reliability standards.17
4.3.4 Interlinking.18
4.4 Design and construction .19
4.4.1 Materials.19
4.4.2 Workmanship .20
4.5 Quality.20
4.6 Performance requirements.20
4.7 Identification and marking.20
4.7.1 General .20
4.7.2 Variant identification number.20
4.7.3 Component marking.20
4.7.4 Package marking .21
4.8 Safety.21
Annex A (informative) Examples of technology of fibre optic branching devices.22
Bibliography .24

Figure 1 – Non-wavelength-selective branching device .11
Figure 2 – Non-wavelength-selective branching device .11
Figure 3 – Non-wavelength-selective branching device .12
Figure 4 – Non-wavelength-selective branching device .12
Figure 5 – Standards.19

60875-1 © IEC:2010(E) – 3 –
Figure A.1 – FBT fibre.22
Figure A.2 – PLC by chemical vapour deposition .22
Figure A.3 – PLC by ion-exchange .23

Table 1 – Three-level IEC specification structure .14
Table 2 – Standards interlink matrix .19
Table 3 – Quality assurance options .19

– 4 – 60875-1 © IEC:2010(E)
INTERNATIONAL ELECTROTEC
...