EN 55103-2:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HVLRQDOQRElektromagnetische Verträglichkeit - Produktfamiliennorm für Audio-, Video- und audiovisuelle Einrichtungen sowie für Studio-Lichtsteuereinrichtungen für professionellen Einsatz -- Teil 2: StörfestigkeitCompatibilité électromagnétique - Norme de famille de produits pour les appareils à usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour spectacles -- Partie 2: ImmunitéElectromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity33.160.01Avdio, video in avdiovizualni sistemi na splošnoAudio, video and audiovisual systems in general33.100.20ImunostImmunityICS:Ta slovenski standard je istoveten z:EN 55103-2:2009SIST EN 55103-2:2010en,fr,de01-december-2010SIST EN 55103-2:2010SLOVENSKI
STANDARDSIST EN 55103-2:19981DGRPHãþD

EUROPEAN STANDARD EN 55103-2 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55103-2:2009 E
ICS 33.100.20 Supersedes EN 55103-2:1996
English version
Electromagnetic compatibility -
Product family standard for audio, video, audio-visual
and entertainment lighting control apparatus for professional use -
Part 2: Immunity
Compatibilité électromagnétique -
Norme de famille de produits
pour les appareils à usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour spectacles -
Partie 2: Immunité
Elektromagnetische Verträglichkeit -
Produktfamiliennorm für Audio-, Video- und audiovisuelle Einrichtungen sowie
für Studio-Lichtsteuereinrichtungen
für professionellen Einsatz -
Teil 2: Störfestigkeit
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 55103-2 on 2009-07-01. This European Standard supersedes EN 55103-2:1996. The following dates were fixed proposed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2010-07-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2012-07-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers protection requirements of EC Directive 2004/108/EC. See Annex ZZ. ___________ SIST EN 55103-2:2010

- 3 - EN 55103-2:2009 Contents 1 Scope .4 2 Normative references .4 3 Definitions .5 4 Electromagnetic environment .6 5 Disturbing phenomena .7 6 Immunity requirements .7 7 Testing . 12 7.1 Performance criteria . 12 7.2 General . 12 7.3 Ports . 13 7.4 Sub-assemblies . 13 7.5 Racks and cabinets . 14 8 Documentation for the purchaser/user . 14 8.1 Documentation which shall be supplied to the purchaser/user . 14 8.2 Documentation which shall be available to the purchaser/user upon request. 14 Annex A (normative) Method of measurement of immunity to radiated magnetic fields, 50 Hz to 10 kHz . 15 Annex B (normative) Methods of measurement of common mode immunity for balanced signal and control ports intended to be connected to cables whose total length according to the manufacturer’s specification may exceed 10 m; 50 Hz to 10 kHz . 20 Annex C (informative) Apparatus using infra-red radiation for open-air transmission purposes . 26 Annex D (informative) Guidance for test houses on immunity testing of audio, video, audio-visual and entertainment lighting control apparatus for professional use . 27 Annex E (informative) Background information about this standard . 31 Annex ZZ (informative) Coverage of Essential Requirements of EC Directives . 32 Bibliography . 33 Figures Figure 1 - Examples of ports . 5 Figure A.1 - Construction of Helmholtz coils for homogeneous fields . 17 Figure A.2 - Construction of the radiating loop for inhomogeneous fields . 18 Figure A.3 - Typical test setup for immunity to inhomogeneous magnetic field . 18 Figure B.1 - Test interface - Test set-up 1 . 20 Figure B.2 - Calibration arrangement for test set-up 1 . 21 Figure B.3 - Test set-ups . 23 Figure B.4 - Equaliser circuit . 23 Tables Table 1 - Immunity requirements . 7 Table B.1 - Test method selection . 19 Table D.1 - Five-point scales for subjective assessment . 29
Some standards may not apply to private low-voltage supplies. NOTE 3 If it is intended to use a hand-held transmitter in proximity, additional mitigation measures may have to be employed to increase the electromagnetic immunity further, beyond the specified limits. This European Standard does not apply to – consumer apparatus, – apparatus specifically designed for security systems, – apparatus designed to radiate electromagnetic energy for radio communications purposes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 55020 2007 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2006) EN 61000-3-2 2006 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) (IEC 61000-3-2:2005) EN 61000-4-2 + A1 + A2 1995 1998 2001 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2:1995 + A1:1998 + A2:2000) EN 61000-4-3 + A1 2006 2008 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006 + A1:2007) EN 61000-4-4 2004 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2004) SIST EN 55103-2:2010

- 5 - EN 55103-2:2009 EN 61000-4-5 2006 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (IEC 61000-4-5:2005) EN 61000-4-6 2007 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6:2003 + A1:2004 + A2:2006) EN 61000-4-11 2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004) EN 61000-6-2 2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments (IEC 61000-6-2:2005) HD 483.1 S2 1989 Sound system equipment - Part 1: General (IEC 60268-1:1985 + A1:1988) 3 Definitions For the purposes of this document, the following terms and definitions apply. Definitions related to EMC and to relevant phenomena may be found in the EU Directive on EMC (2004/108/EC), in IEC 60050-161 and in other IEC and CISPR Publications. 3.1 electromagnetic compatibility the ability of a device, unit of equipment or system to function satisfactorily in its electromagnetic environment without introducing intolerable disturbances to anything in that environment 3.2 port particular interface of the specified apparatus with the electromagnetic environment (see Figure 1) 3.3 enclosure port the physical boundary of the apparatus through which electromagnetic fields may radiate or impinge 3.4 professional apparatus apparatus for use in trades, professions or industries and which is not intended for sale to the general public 3.5 professional digital apparatus professional apparatus designed for the purpose of controlling audio, video, audiovisual or entertainment lighting characteristics, by means of periodic pulsed electrical waveforms, or of processing audio, video or lighting control signals in digital form 3.6 professional entertainment lighting control apparatus professional apparatus producing electrical control signals for controlling the intensity, colour, nature or direction of the light from a luminaire, where the intention is to create artistic effects in theatrical, television or musical productions and visual presentations 3.7 test report the documentation of the EMC tests performed, and their results, prepared by the persons who carried out the tests, for example the manufacturer or a test laboratory SIST EN 55103-2:2010
...