CLC/TR 62258-4:2013

SLOVENSKI STANDARD
01-marec-2013
,]GHONLVSROSUHYRGQLãNLPLþLSLGHO9SUDãDOQLN]DXSRUDEQLNHLQGREDYLWHOMH
þLSRY
Semiconductor die products - Part 4: Questionnaire for die users and suppliers
Halbleiter-Chip-Erzeugnisse - Teil 4: Fragebogen für Chip-Anwender und -Lieferanten
Produits de puces de semiconducteurs - Partie 4: Questionnaire destiné aux utilisateurs
et fournisseurs de puces
Ta slovenski standard je istoveten z: CLC/TR 62258-4:2013
ICS:
31.080.99 Drugi polprevodniški elementi Other semiconductor devices
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CLC/TR 62258-4
RAPPORT TECHNIQUE
January 2013
TECHNISCHER BERICHT
ICS 31.080.99 Supersedes CLC/TR 62258-4:2007

English version
Semiconductor die products -
Part 4: Questionnaire for die users and suppliers
(IEC/TR 62258-4:2012)
Produits de puces de semiconducteurs -  Halbleiter-Chip-Erzeugnisse -
Partie 4: Questionnaire destiné Teil 4: Fragebogen für Chip-Anwender
aux utilisateurs et fournisseurs de puces und -Lieferanten
(CEI/TR 62258-4:2012) (IEC/TR 62258-4:2012)

This Technical Report was approved by CENELEC on 2012-09-12.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 62258-4:2013 E

Foreword
The text of document 47/2073A/DTR, future edition 2 of IEC/TR 62258-4, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as CLC/TR 62258-4:2013.

This document supersedes CLC/TR 62258-4:2007.

CLC/TR 62258-4:2007:
The document checklist was changed to mirror EN 62258-1:2010 requirements exactly.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC/TR 62258-4:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC/TR 62258-7 NOTE Harmonised as CLC/TR 62258-7.
IEC/TR 62258-8 NOTE Harmonised as CLC/TR 62258-8.

- 3 - CLC/TR 62258-4:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050 Series International Electrotechnical Vocabulary - -
(IEV)
IEC 62258-1 2009 Semiconductor die products - EN 62258-1 2010
Part 1: Procurement and use
IEC 62258-2 2011 Semiconductor die products - EN 62258-2 2011
Part 2: Exchange data formats
IEC/TR 62258-4 ®
Edition 2.0 2012-08
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
Semiconductor die products –
Part 4: Questionnaire for die users and suppliers

Produits de puces de semiconducteurs –

Partie 4: Questionnaire destiné aux utilisateurs et fournisseurs de puces

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 31.080.99 ISBN 978-2-83220-297-5

– 2 – TR 62258-4  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General . 6
5 Data exchange . 7
Annex A (normative) Customer questionnaire on die devices . 8
Bibliography . 18

Table A.1 – Basic data . 9
Table A.2 – Bare die and wafers . 10
Table A.3 – Die and wafers with connection structures . 11
Table A.4 – Minimally-packaged die devices . 12
Table A.5 – Quality, reliability and storage . 12
Table A.6 – Terminal data . 14
Table A.7 – Terminal geometries . 14
Table A.8 – Polygon vertices . 15
Table A.9 – Fiducial definitions . 15
Table A.10 – Fiducial positions . 16
Table A.11 – Simulator data . 16
Table A.12 – Group definitions . 17
Table A.13 – Permutations . 17

TR 62258-4  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
SEMICONDUCTOR DIE PRODUCTS –
Part 4: Questionnaire for die users and suppliers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62258-4, which is a technical report, has been prepared by IEC technical committee 47:
Semiconductor devices.
This technical report contains attached files in the form of 47-62258-4-TR-E-worksheet.xls.
These files are intended to be used as a complement and do not form an integral part of the
technical report.
This second edition cancels and replaces the first edition published in 2007 and constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– 4 – TR 62258-4  IEC:2012
The document checklist was changed to mirror IEC 62258-1:2009 requirements exactly.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
47/2073A/DTR 47/2108/RVC
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 62258 series, published under the general title Semiconductor
die products, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
TR 62258-4  IEC:2012 – 5 –
INTRODUCTION
This technical report is based on the work carried out in the ESPRIT 4th Framework Project
GOODDIE which resulted in the publication of the ES 59008 series of European specifications.
Organizations that helped prepare this document included the ESPRIT ENCAST and
ENCASIT projects, the Die Products Consortium, JEITA, JEDEC and ZVEI.

– 6 – TR 62258-4  IEC:2012
SEMICONDUCTOR DIE PRODUCTS –
Part 4: Questionnaire for die users and suppliers

1 Scope
This part of IEC 62258 has been developed to facilitate the production, supply and use of
semiconductor die products, including:
• wafers;
• singulated bare die;
• die and wafers with attached connection structures;
• minimally or partially encapsulated die and wafers.
This technical report contains a questionnaire,
...