Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements

IEC 61158-3-4:2019 defines the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This third edition cancels and replaces the second edition published in 2014. It constitutes a technical revision. The main changes are: -Additional user parameters to services; -Additional services to support distributed objects; -Additional secure services

Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4: Dienstfestlegungen des Data-Link Layer (Sicherungsschicht) - Typ 4-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-4: Définition des services de la couche liaison de données - Eléments de type 4

L’IEC 61158-3-4:2019 fournit les éléments communs des communications de messagerie critiques du point de vue temporel entre dispositifs dans un environnement automatisé. Le terme "en temps critique" signale l'existence d'une fenêtre temporelle dans laquelle des actions spécifiées doivent être exécutées, avec un niveau de certitude défini. La non-réalisation des actions spécifiées dans la fenêtre temporelle induit un risque de défaillance des applications qui demandent ces actions, avec les risques afférents pour l'équipement, les installations et éventuellement la vie humaine. La présente norme définit de manière abstraite les services visibles de l'extérieur fournis par la couche liaison de données de réseau de terrain de type 4 en termes a) des actions et événements primitifs des services; b) de paramètres associés à chaque événement et action de primitive, ainsi que de forme prise par ces paramètres; et c) d'interaction entre ces événements et ces actions, ainsi que de séquences valides desdits événements et actions.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-4. del: Definicija opravil na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-3-4:2019)

Ta dokument določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta mednarodni standard na abstrakten način določa zunanje vidna opravila, ki ga zagotavlja nivo podatkovnih povezav procesnih vodil tipa 4 v zvezi s/z: a) primitivnimi dejanji in dogodki opravil; b) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; in c) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega dokumenta je opredeliti opravila, ki se zagotavljajo za: – aplikacijski nivo procesnih vodil tipa 4 na meji med aplikacijskim nivojem in nivojem podatkovnih povezav referenčnega modela procesnih vodil; – vodenje sistemov na meji med nivojem podatkovnih povezav in vodenje sistemov referenčnega modela procesnih vodil.

General Information

Status
Published
Publication Date
20-Jun-2019
Withdrawal Date
28-May-2022
Current Stage
6060 - Document made available - Publishing
Start Date
21-Jun-2019
Completion Date
21-Jun-2019

Relations

Buy Standard

Standard
EN IEC 61158-3-4:2019
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 61158-3-4:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-4. del:
Definicija opravil na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-3-
4:2019)
Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer
service definition - Type 4 elements (IEC 61158-3-4:2019)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 4-Elemente (IEC 61158-3-4:2019)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-4:
Définition des services de la couche liaison de données - Eléments de type 4 (IEC 61158
-3-4:2019)
Ta slovenski standard je istoveten z: EN IEC 61158-3-4:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61158-3-4

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-4:2014
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-4: Data-link layer service definition - Type 4 elements
(IEC 61158-3-4:2019)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4:
bus de terrain - Partie 3-4: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Eléments de type 4 (Sicherungsschicht) - Typ 4-Elemente
(IEC 61158-3-4:2019) (IEC 61158-3-4:2019)
This European Standard was approved by CENELEC on 2019-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61158-3-4:2019 E

European foreword
The text of document 65C/945/FDIS, future edition 3 of IEC 61158-3-4, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-3-4:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-29
document have to be withdrawn
This document supersedes EN 61158-3-4:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61158-3-4:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61158-1:2019 NOTE Harmonized as EN IEC 61158-1:2019 (not modified)
IEC 61158-2 NOTE Harmonized as EN 61158-2
IEC 61158-4-4:2019 NOTE Harmonized as EN IEC 61158-4-4:2019 (not modified)
IEC 61158-5-4:2019 NOTE Harmonized as EN IEC 61158-5-4:2019 (not modified)
IEC 61784-1:2019 NOTE Harmonized as EN IEC 61784-1:2019 (not modified)
IEC 61784-2:2019 NOTE Harmonized as EN IEC 61784-2:2019 (not modified)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 10731 1994 Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
IEC 61158-3-4 ®
Edition 3.0 2019-04
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –

Part 3-4: Data-link layer service definition – Type 4 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-6786-8

– 2 – IEC 61158-3-4:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 General . 7
1.2 Specifications . 7
1.3 Conformance . 7
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 8
3.1 Reference model terms and definitions . 8
3.2 Service convention terms and definitions . 9
3.3 Data-link service terms and definitions . 10
3.4 Symbols and abbreviations . 12
3.5 Conventions . 13
4 Data-link service and concepts . 14
4.1 Overview. 14
4.1.1 General . 14
4.1.2 Overview of DL-naming (addressing) . 14
4.2 Types and classes of data-link service . 15
4.3 Functional classes . 15
4.4 Facilities of the connectionless-mode data-link service . 15
4.5 Model of the connectionless-mode data-link service . 15
4.5.1 General . 15
4.5.2 Unconfirmed request . 15
4.5.3 Confirmed request . 16
4.6 Sequence of primitives . 16
4.6.1 Constraints on sequence of primitives . 16
4.6.2 Relation of primitives at the end-points of connectionless service . 17
4.6.3 Sequence of primitives at one DLSAP. 18
4.7 Connectionless-mode data transfer functions . 18
4.7.1 General . 18
4.7.2 Types of primitives and parameters . 18
5 DL-management service . 20
5.1 Scope and inheritance . 20
5.2 Facilities of the DL-management service . 20
5.3 Model of the DL-management service . 21
5.4 Constraints on sequence of primitives . 21
5.5 Set . 21
5.5.1 Function . 21
5.5.2 Types of parameters . 22
5.6 Get . 22
5.6.1 Function . 22
5.6.2 Types of parameters . 22
5.7 Action . 23
5.7.1 Function . 23
5.7.2 Types of parameters . 23
5.7.3 Sequence of primitives . 24

IEC 61158-3-4:2019 © IEC 2019 – 3 –
5.8 Event . 24
5.8.1 Function . 24
5.8.2 Types of parameters . 24
Bibliography . 25

Figure 1 – Relationship of PhE, DLE and DLS-users . 14
Figure 2 – Confirmed and unconfirmed UNITDATA request time-sequence diagram . 17
Figure 3 – Repeated confirmed request time-sequence diagram . 17
Figure 4 – State transition diagram for sequences of primitives at one DLSAP . 18
Figure 5 – Sequence of primitives for the DLM action service . 21

Table 1 – Summary of DL-connectionless-mode primitives and parameters . 17
Table 2 – Unitdata transfer primitives and parameters . 18
Table 3 – Control-status error codes . 20
Table 4 – Summary of DL-management primitives and parameters . 21
Table 5 – DLM-Set primitive and parameters . 22
Table 6 – DLM-Get primitive and parameters . 22
Table 7 – DLM-Action primitive and parameters . 23
Table 8 – DLM-Event primitive and parameters .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.