EN IEC 61158-3-24:2023
(Main)Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements
Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements
IEC 61158-3-24:2023 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time-window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This document defines in an abstract way the externally visible service provided by the Type 24 fieldbus data-link layer in terms of the primitive actions and events of the service; the interrelationship between these actions and events, and their valid sequences; the parameters associated with each primitive action and event, and the form which they take.
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 24-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-24: Définition des services de la couche liaison de données - Eléments de type 24
L'IEC 61158-3-24:2023 fournit les éléments communs pour les communications de messagerie prioritaires entre les appareils d’un environnement d’automatisation. Le terme "prioritaire" est utilisé pour indiquer la présence d’une fenêtre temporelle, dans laquelle il est exigé de réaliser une ou plusieurs actions spécifiées selon un niveau défini de certitude. Tout manquement à réaliser ces actions dans la fenêtre de temps prévue risque de provoquer la défaillance des applications qui les demandent, avec le risque de mettre en danger l’équipement, l’usine, voire les personnes. Le présent document définit de manière abstraite le service visible externe fourni par la couche liaison de données de bus de terrain de type 24, concernant: les actions et événements liés aux primitives du service; l’interrelation entre ces actions et événements, et leurs séquences valides; les paramètres associés à chaque action et événement de primitive, et la forme qu’ils prennent.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-24. del: Definicija opravil na ravni podatkovnih povezav - Elementi tipa 24 (IEC 61158-3-24:2023)
Ta del standarda IEC 61158 določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta dokument na abstrakten način določa na zunaj vidno opravilo, ki ga zagotavlja podatkovna povezovalna raven procesnih vodil tipa 24 v smislu:
– primitivnih dejanj in dogodkov opravila;
– medsebojnih povezav med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji;
– parametrov, povezanih z vsakim primitivnim dejanjem in dogodkom, ter obliko, ki jo prevzamejo.
Namen tega dokumenta je opredeliti opravila, ki se zagotavljajo za:
• aplikacijsko raven procesnih vodil tipa 24 na meji med aplikacijsko ravnjo in ravnjo podatkovnih povezav referenčnega modela procesnega vodila;
• upravljanje sistemov na meji med ravnjo podatkovnih povezav in upravljanjem sistemov referenčnega modela procesnega vodila.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Nadomešča:
SIST EN 61158-3-24:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-24. del:
Definicija opravil na ravni podatkovnih povezav - Elementi tipa 24 (IEC 61158-3-
24:2023)
Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer
service definition - Type 24 elements (IEC 61158-3-24:2023)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 24-Elemente (IEC 61158-3-24:2023)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-24:
Définition des services de la couche liaison de données - Eléments de type 24 (IEC
61158-3-24:2023)
Ta slovenski standard je istoveten z: EN IEC 61158-3-24:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61158-3-24
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-24:2014
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-24: Data-link layer service definition - Type 24 elements
(IEC 61158-3-24:2023)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24:
bus de terrain - Partie 3-24: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Eléments de type 24 (Sicherungsschicht) - Typ 24-Elemente
(IEC 61158-3-24:2023) (IEC 61158-3-24:2023)
This European Standard was approved by CENELEC on 2023-04-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61158-3-24:2023 E
European foreword
The text of document 65C/1201/FDIS, future edition 2 of IEC 61158-3-24, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-3-
24:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-20
document have to be withdrawn
This document supersedes EN 61158-3-24:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61158-3-24:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61158-1 NOTE Approved as EN IEC 61158-1
IEC 61158-2 NOTE Approved as EN 61158-2
IEC 61158-4-24 NOTE Approved as EN IEC 61158-4-24
IEC 61158-5-24 NOTE Approved as EN 61158-5-24
IEC 61158-6-24 NOTE Approved as EN 61158-6-24
IEC 61784-1 (series) NOTE Approved as EN IEC 61784-1 (series)
IEC 61784-2 (series) NOTE Approved as EN IEC 61784-2 (series)
To be published. Stage at time of publication: FprEN IEC 61784-1-X:2023.
To be published. Stage at time of publication: FprEN IEC 61784-2-X:2023.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic reference model:
The basic model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic reference model:
Naming and addressing
ISO/IEC 10731 2005 Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO/IEC 19501 2005 Information technology - Open Distributed - -
Processing - Unified Modeling Language
(UML) Version 1.4.2
IEC 61158-3-24 ®
Edition 2.0 2023-03
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 3-24: Data-link layer service definition – Type 24 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-6563-5
– 2 – IEC 61158-3-24:2023 © IEC 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Reference model terms and definitions . 9
3.2 Service convention terms and definitions . 10
3.3 Additional Type 24 data-link specific definitions . 10
3.4 Common symbols and abbreviations . 13
3.5 Additional type 24 symbols and abbreviations . 14
3.6 Common conventions . 14
3.7 Additional Type 24 conventions. 15
4 Data-link service and concepts . 15
4.1 Overview. 15
4.2 DLS-user services . 16
4.2.1 General . 16
4.2.2 Write data . 16
4.2.3 Read data . 16
4.2.4 Send data with acknowledge service (SDA) . 16
4.2.5 Send data with no-acknowledge service (SDN) . 17
4.2.6 Event . 17
4.2.7 Get status . 17
4.3 Overview of interactions . 17
4.4 Detailed specification of services and interactions . 19
4.4.1 Write data . 19
4.4.2 Read data . 20
4.4.3 Send data with acknowledge . 21
4.4.4 Send data with no-acknowledge (SDN) . 22
4.4.5 Cyclic Event . 23
5 DL-management service . 23
5.1 Overview. 23
5.1.1 General . 23
5.1.2 Reset . 23
5.1.3 Set value . 24
5.1.4 Get value . 24
5.1.5 Evaluate delay . 24
5.1.6 Set communication mode . 24
5.1.7 Start communication . 24
5.1.8 Clear error status . 24
5.1.9 DLM Event . 24
5.2 Overview of interactions . 24
5.3 Detailed specification of services and interactions . 26
5.3.1 Reset . 26
IEC 61158-3-24:2023 © IEC 2023 – 3 –
5.3.2 Set value . 27
5.3.3 Get value . 32
5.3.4 Evaluate delay . 34
5.3.5 Set communication mode . 35
5.3.6 Start communication . 37
5.3.7 Clear error . 38
5.3.8 DLM error event . 39
Bibliography . 40
Figure 1 – Sequence of primitive for set data and read data service . 18
Figure 2 – Sequence of primitive for send data with acknowledge service . 18
Figure 3 – Sequence of primitive for send data with no-acknowledge service . 19
Figure 4 – Sequence of primitives for event service . 19
Figure 5 – Sequence of primitives for Reset service . 25
Figure 6 – S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.