ENV 1927-3:1998
(Main)Qualitative classification of softwood round timber - Part 3: Larches and douglas firs
Qualitative classification of softwood round timber - Part 3: Larches and douglas firs
This Standard specifies the qualitative classification for the roundwood of larch (Larix) and douglas fir (Pseudotsuga). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of larches and douglas firs where the intended use is known.
Qualitäts-Sortierung von Nadel-Rundholz - Teil 3: Lärchen und Douglasie
Diese Vornorm legt die Qualitäts-Sortierung von Lärchen- und Douglasien-Rundholz fest (Larix spp und Pseudotsuga spp). Die Sortierung kann entweder nach den Abschnitten 4 und 5 oder nach dem Abschnitt 6 vorgenommen werden. Die Abschnitte 4 und 5 beschreiben die verwendungsneutrale Qualitäts-Sortierung. Der Abschnitt 6 beschreibt die Kriterien welche bei allen nationalen Normen für verwendungsbezogenes Nadel-Rundholz (Lärchen und Douglasien) aufgenommen werden. Bei Verträgen über verwendungsbezogenes Rundholz werden die in Abschnitt 6 aufgeführten Merkmale angewendet.
Classement qualitatif des bois ronds résineux - Partie 3: Mélèzes et douglas
La présente norme spécifie le classement qualitatif des bois ronds de mélèze (Larix) et de douglas (Pseudotsuga). Le classement est réalisé soit en utilisant les articles 4 et 5, soit l'article 6. Les articles 4 et 5 décrivent le classement qualitatif de bois ronds dont la destination n'est pas connue. L'article 6 donne les caractéristiques devant être incluses dans toutes normes nationales décrivant un classement qualitatif ou servir de guide à des contrats fixant les qualités des bois ronds de mélèzes et de douglas, dont la destination est connue.
Razvrščanje okroglega lesa iglavcev po kakovosti – 3. del: Macesni in duglazije
General Information
- Status
- Withdrawn
- Publication Date
- 15-Dec-1998
- Withdrawal Date
- 25-Mar-2008
- Technical Committee
- CEN/TC 175 - Round and sawn timber
- Drafting Committee
- CEN/TC 175/WG 4 - Round timber
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Mar-2008
- Completion Date
- 26-Mar-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
ENV 1927-3:1998 is a standardization document published by the European Committee for Standardization (CEN). Its full title is "Qualitative classification of softwood round timber - Part 3: Larches and douglas firs". This standard covers: This Standard specifies the qualitative classification for the roundwood of larch (Larix) and douglas fir (Pseudotsuga). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of larches and douglas firs where the intended use is known.
This Standard specifies the qualitative classification for the roundwood of larch (Larix) and douglas fir (Pseudotsuga). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of larches and douglas firs where the intended use is known.
ENV 1927-3:1998 is classified under the following ICS (International Classification for Standards) categories: 79.040 - Wood, sawlogs and sawn timber. The ICS classification helps identify the subject area and facilitates finding related standards.
ENV 1927-3:1998 has the following relationships with other standards: It is inter standard links to EN 1927-3:2008, EN IEC 60728-3:2018, EN 60728-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ENV 1927-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2003
5D]YUãþDQMHRNURJOHJDOHVDLJODYFHYSRNDNRYRVWL±GHO 0DFHVQLLQGXJOD]LMH
Qualitative classification of softwood round timber - Part 3: Larches and douglas firs
Qualitäts-Sortierung von Nadel-Rundholz - Teil 3: Lärchen und Douglasie
Classement qualitatif des bois ronds résineux -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...