EN 10248-1:2023
(Main)Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
This document specifies the requirements for hot rolled steel sheet piles in respect of its chemical composition, mechanical properties and conditions of delivery.
The products specified are for general, structural and civil engineering works. The types of steel sheet piles covered by this document are: Z-shaped, U-shaped, straight web, H-shaped with their interlocking bars. The types of interlocks and the requirements in respect of tolerances on shape and dimensions are specified in Part 2 of this document.
Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Dieses Dokument legt Anforderungen an warmgewalzte Spundbohlen aus Stahl hinsichtlich ihrer chemischen Zusammensetzung, mechanischen Eigenschaften und Lieferbedingungen fest.
Die angegebenen Erzeugnisse eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten. Dieses Dokument behandelt folgende Formen von Stahlspundbohlen: Z-Profil, U-Profil, Flachprofil, H-Profil mit ihren Verbindungsschlössern. Die Formen der Schlösser und die Festlegungen bezüglich der Grenzabmaße und Formtoleranzen sind in Teil 2 dieses Dokumentes enthalten.
Palplanches en acier laminées à chaud - Partie 1: Conditions techniques de livraison
Le présent document spécifie les prescriptions relatives à la composition chimique, aux caractéristiques mécaniques et aux conditions de livraison des palplanches en acier laminées à chaud.
Les produits désignés sont destinés à être utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction. Les types de palplanches en acier couverts dans le présent document sont : les palplanches en Z, en U, plates, en H avec leurs serrures. Les types de serrures et les prescriptions relatives aux tolérances sur forme et dimensions sont spécifiés dans la Partie 2 du présent document.
Vroče valjane jeklene zagatnice - 1. del: Tehnični dobavni pogoji
Ta dokument določa zahteve za pilote iz vroče valjanega jekla glede na njegovo kemično sestavo, mehanske lastnosti in dobavne pogoje. Navedeni izdelki so namenjeni za splošna, konstrukcijska in gradbena dela. Vrste pilotov iz jeklene pločevine, ki jih zajema ta standard, so: Jeklena pločevina v obliki črke Z, črke U, ravne mreže, obliki črke H s prepletenimi palicami
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 10248-1:2023
01-maj-2023
Vroče valjana jeklena obešala - 1. del: Tehnični dobavni pogoji
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Palplanches en acier laminées à chaud - Partie 1: Conditions techniques de livraison
Ta slovenski standard je istoveten z: EN 10248-1:2023
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
SIST EN 10248-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 10248-1:2023
---------------------- Page: 2 ----------------------
SIST EN 10248-1:2023
EN 10248-1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 77.140.70 Supersedes EN 10248-1:1995
English Version
Hot-rolled steel sheet piles - Part 1: Technical delivery
conditions
Palplanches en acier laminées à chaud - Partie 1: Warmgewalzte Spundbohlen aus Stahl - Teil 1:
Conditions techniques de livraison Technische Lieferbedingungen
This European Standard was approved by CEN on 17 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10248-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10248-1:2023
EN 10248-1:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classification and designation . 6
4.1 Classification. 6
4.2 Designation . 6
5 Information to be supplied by the purchaser . 6
5.1 Mandatory information . 6
5.2 Options . 7
6 Manufacturing process . 7
6.1 Steel making process . 7
6.2 Delivery conditions . 7
7 Requirements . 7
7.1 General.
...
SLOVENSKI STANDARD
SIST EN 10248-1:2023
01-maj-2023
Vroče valjane jeklene zagatnice - 1. del: Tehnični dobavni pogoji
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Palplanches en acier laminées à chaud - Partie 1: Conditions techniques de livraison
Ta slovenski standard je istoveten z: EN 10248-1:2023
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
SIST EN 10248-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 10248-1:2023
---------------------- Page: 2 ----------------------
SIST EN 10248-1:2023
EN 10248-1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 77.140.70 Supersedes EN 10248-1:1995
English Version
Hot-rolled steel sheet piles - Part 1: Technical delivery
conditions
Palplanches en acier laminées à chaud - Partie 1: Warmgewalzte Spundbohlen aus Stahl - Teil 1:
Conditions techniques de livraison Technische Lieferbedingungen
This European Standard was approved by CEN on 17 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10248-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10248-1:2023
EN 10248-1:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classification and designation . 6
4.1 Classification. 6
4.2 Designation . 6
5 Information to be supplied by the purchaser . 6
5.1 Mandatory information . 6
5.2 Options . 7
6 Manufacturing process . 7
6.1 Steel making process . 7
6.2 Delivery conditions . 7
7 Requirements . 7
7.1 General.
...
SLOVENSKI STANDARD
oSIST prEN 10248-1:2022
01-april-2022
Vroče valjana jeklena obešala - 1. del: Tehnični dobavni pogoji
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Palplanches en acier laminées à chaud - Partie 1 - Conditions techniques de livraison
Ta slovenski standard je istoveten z: prEN 10248-1
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10248-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10248-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 10248-1:2022
DRAFT
EUROPEAN STANDARD
prEN 10248-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 77.140.70 Will supersede EN 10248-1:1995
English Version
Hot-rolled steel sheet piles - Part 1: Technical delivery
conditions
Palplanches en acier laminées à chaud - Partie 1 - Warmgewalzte Spundbohlen aus Stahlen - Teil 1:
Conditions techniques de livraison Technische Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 3.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10248-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10248-1:2022
prEN 10248-1:2022 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classification and designation . 6
4.1 Classification. 6
4.2 Designation . 6
5 Information to be supplied by the purchaser . 6
5.1 Mandatory information . 6
5.2 Options . 7
6 Manufacturing process . 7
6.1 Steel making process . 7
6.2 Delivery conditions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.