iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 610:1995

(Main)

Tin and tin alloys - Ingot tin

Tin and tin alloys - Ingot tin

This draft European Standard specifies the requirements for the chemical composition, surface condition, sampling, analysis, inspection documentation and marking for five grades of ingot tin. The grades of tin included in this draft European Standard are those which are traded internationally.

Zinn und Zinnlegierungen - Zinn in Masseln

Der vorliegende Entwurf zur Europäischen Norm legt die Anforderungen für die chemischen Zusammensetzungen, Oberflächenbeschaffenheit, Probenentnahme, Analyse, Abnahmebescheinigung und Kennzeichnung für fünf Sorten von Zinn in Masseln fest. Die in diesem Entwurf zur Europäischen Norm enthaltenen Zinnsorten sind zur Zeit international im Handel.

Etain et alliages d'étain - Etain en lingot

Le présent projet de norme européenne prescrit la composition chimique, l'état de surface, l'échantillonnage, l'analyse, le document de contrôle et le marquage de cinq nuances d'étain en lingot. Les nuances d'étain spécifiées dans le présent projet de norme européenne sont celles qui font l'objet d'échanges internationaux.

Kositer in kositrove zlitine - Ingoti kositra

General Information

Status
Published
Publication Date
25-Jul-1995
ICS
77.150.60 - Lead, zinc and tin products
Technical Committee
CEN/TC 220 - Tin and tin alloys
Drafting Committee
CEN/TC 220 - Tin and tin alloys
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
15-Jun-2022
Ref Project
SIST EN 610:1998 - Tin and tin alloys - Ingot tin

Buy Standard

EN 610:1998EN 610:1998
PreviousNext
Standard
EN 610:1998
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kositer in kositrove zlitine - Ingoti
kositraZinn und Zinnlegierungen - Zinn in MasselnEtain et alliages d'étain - Etain en lingotTin and tin alloys - Ingot tin77.150.60L]GHONLLead, zinc and tin productsICS:Ta slovenski standar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13615:2001/AC:2002(Corrigendum)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
SIST EN 13615:2004/AC:2004

TC - Modification in 7.2

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13615:2001(Main)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
SIST EN 13615:2004

This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques..

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 611-2:1996(Main)
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware
SIST EN 611-2:1998

This Part of EN 611 specifies the requirements for the fabrication, sampling, analysis and marking of pewterware. It does not cover articles manufactured from materials other than pewter which have been coated or clad with pewter. Note: The requirements for pewter alloys are specified in EN 611-2.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12588:2006(Main)
Lead and lead alloys - Rolled lead sheet for building purposes
SIST EN 12588:2007

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14057:2003(Main)
Lead and lead alloys - Scraps - Terms and definitions
SIST EN 14057:2004

This European Standard defines specific terms which are helpful for the communication within the lead industry and its customers relating to scrap of lead and lead alloys.
A clear terminology and classification of these materials, new and used, recovered from products and processes is also contained. No reference is made either to commercial terms of commercial contracts and conditions such as collection, weighing, shipping, receiving and claims or technical values such as lead and alloying elements content, analyticals and physical characteristics such as size and weight. No reference is made to regulatory environmental, health and safety considerations. A glossary (see clause 4) comprises all terms which are defined in this standard and their translations into French and German in alphabetical order.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13615:2001/AC:2002(Corrigendum)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
SIST EN 13615:2004/AC:2004

TC - Modification in 7.2

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13615:2001(Main)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
SIST EN 13615:2004

This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques..

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13086:2000(Main)
Lead and lead alloys - Lead oxides
SIST EN 13086:2002

This European Standard specifies the requirements, acceptance tolerances and chemical and physical test procedures for lead oxides, considering litharges (powder or granulated), battery oxides (Barton or Mill) and crystal red lead. WARNING: Lead and lead compounds are toxic by inhalation and/or ingestion.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12548:1999(Main)
Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves
SIST EN 12548:2000

This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for the manufacture of electric cable sheathing and sleeves.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-6:1998(Main)
Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings
SIST EN 1559-6:1999

This part of EN 1559 applies to castings made from zinc alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for zinc alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day