EN 1014-1:1995
(Main)Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote
This part of EN 1014 specifies procedures for obtaining a representative sample from a consignment of creosote. This part of EN 1014 is only applicable to consignments of creosote which are in a single phase at the time of the sampling. Note 1 : At ambient temperature, part of the creosote may be in crystalline form. In such cases, it is necessary to heat the creosote to a temperature at which it is entirely liquid before sampling.
Holzschutzmittel - Teerimprägnieröl und damit imprägniertes Holz - Probenahmen und Analysen - Teil 1: Verfahren zur Probenahme von Teerimprägnieröl
Dieser Teil der EN 1014 beschreibt Verfahren, repräsentative Proben einer Lieferung von Teerimprägnieröl zu erhalten. Dieser Teil der EN 1014 ist nur a anwendbar auf Lieferungen von Teerimprägnieröl, die zum Zeitpunkt der Probenahme als einheitliche Phase vorliegen. Anmerkung 1 : Ein Teil des Teerimprägnieröls kann bei Raumtemperatur in kristalliner Form vorliegen. In solchen Fällen ist es notwendig, das Teerimprägnieröl vor der Probenahme auf eine Temperatur zu erwärmen, bei der es vollständig flüssig vorliegt.
Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 1: Procédure d'échantillonnage de la créosote
La présente partie de l'EN 1014 prescrit des procédures permettant d'obtenir un échantillon représentatif de créosote. Cette partie de EN 1014 n'est applicable qu'aux expéditions de créosote ne présentant qu'une seule phase au moment du prélèvement. Note 1 : A température ambiante, une partie de la créosote peut être sous forme cristallisée. Dans ce cas, il est nécessaire de réchauffer la créosote, avant prise d'échantillons, à une température à laquelle elle est complètement liquide.
Zaščitna sredstva za les – Kreozot in s kreozotom zaščiten les – Metode vzorčenja in analize – 1. del: Postopek za vzorčenje kreozota
General Information
- Status
- Withdrawn
- Publication Date
- 08-Feb-1995
- Withdrawal Date
- 08-Jun-2010
- Technical Committee
- CEN/TC 38 - Durability of wood and derived materials
- Drafting Committee
- CEN/TC 38/WG 12 - Creosotes
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Jun-2010
- Completion Date
- 09-Jun-2010
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 12-Jun-2010
Get Certified
Connect with accredited certification bodies for this standard
ECOCERT
Organic and sustainability certification.
Eurofins Food Testing Global
Global leader in food, environment, and pharmaceutical product testing.
Intertek Bangladesh
Intertek certification and testing services in Bangladesh.
Sponsored listings
Frequently Asked Questions
EN 1014-1:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote". This standard covers: This part of EN 1014 specifies procedures for obtaining a representative sample from a consignment of creosote. This part of EN 1014 is only applicable to consignments of creosote which are in a single phase at the time of the sampling. Note 1 : At ambient temperature, part of the creosote may be in crystalline form. In such cases, it is necessary to heat the creosote to a temperature at which it is entirely liquid before sampling.
This part of EN 1014 specifies procedures for obtaining a representative sample from a consignment of creosote. This part of EN 1014 is only applicable to consignments of creosote which are in a single phase at the time of the sampling. Note 1 : At ambient temperature, part of the creosote may be in crystalline form. In such cases, it is necessary to heat the creosote to a temperature at which it is entirely liquid before sampling.
EN 1014-1:1995 is classified under the following ICS (International Classification for Standards) categories: 71.100.50 - Wood-protecting chemicals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1014-1:1995 has the following relationships with other standards: It is inter standard links to EN 1014-1:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1014-1:1995 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1014-1:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzschutzmittel - Teerimprägnieröl und damit imprägniertes Holz - Probenahmen und Analysen - Teil 1: Verfahren zur Probenahme von TeerimprägnierölProduits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 1: Procédure d'échantillonnage de la créosoteWood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Pro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...