FprEN 16584-1

SLOVENSKI STANDARD
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Splošne zahteve - 1. del: Kontrast
Railway applications - Design for PRM use - General requirements - Part 1: Contrast
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Allgemeine
Anforderungen - Teil 1: Kontrast
Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences
générales - Partie 1: Contraste
Ta slovenski standard je istoveten z: prEN 16584-1
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 16584-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2022
ICS 11.180.01; 45.020 Will supersede EN 16584-1:2017
English Version
Railway applications - Design for PRM use - General
requirements - Part 1: Contrast
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR - Exigences générales - Partie 1: PRM - Allgemeine Anforderungen - Teil 1: Kontrast
Contraste
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16584-1:2022 E
worldwide for CEN national Members.

prEN 16584-1:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 12
5 Requirements and assessment . 13
5.1 General. 13
5.2 Infrastructure . 13
5.2.1 Obstacle-free routes . 13
5.2.2 Doors and entrances . 13
5.2.3 Transparent obstacles . 15
5.2.4 Furniture and free-standing devices . 15
5.2.5 Handrails. 15
5.2.6 Platform danger area and edge of platform . 15
5.2.7 End of platform . 16
5.3 Rolling stock . 16
5.3.1 Seats . 16
5.3.2 Doors . 18
5.3.3 Exterior doors . 19
5.3.4 Interior doors . 22
5.3.5 Toilets (standard and universal) . 23
5.3.6 Customer Information . 25
5.3.7 Height changes . 28
5.3.8 Handrails. 29
5.3.9 Access/egress steps . 29
5.3.10 Call for aid devices . 30
5.4 Boarding aids . 31
6 Methodologies for assessing contrast . 32
6.1 General. 32
6.2 Establishing LRVs . 32
6.2.1 General. 32
6.2.2 Method of establishing LRV . 32
6.2.3 Specific assessment criteria for stainless steel . 38
6.3 Method of assessing contrast with LRVs established (as in 6.2). 39
6.3.1 General requirements for contrast . 39
6.3.2 Specific requirements for contrast on signage . 39
6.3.3 Durability of contrast . 39
6.3.4 Specific requirements for electronic display . 39
Annex A (normative) Contrast Charts. 41
A.1 General. 41
A.2 Worked examples for contrast . 43
A.3 Self-contrasting bands . 45
Annex B (normative) Contrast for doors and transparent obstacles . 46
prEN 16584-1:2022 (E)
B.1 General . 46
B.2 Exterior doors . 46
B.3 Case 1: If the window is less than or equal to 40 % of the visible door leaf . 47
B.4 Case 2: If the window is greater than 40 % of the visible door leaf. 48
B.5 Case 3: Alternative if the door leaf is not coloured to contrast with the bodyside . 49
B.6 Markings for interior doors or transparent obstacles . 50
Annex C (normative) Effective contrast calculation for displays . 53
C.1 Illuminated displays . 53
C.2 Back lit and/or self-lit displays . 53
Annex D (informative) Supporting information from published documents . 55
D.1 General . 55
D.2 CIE Publication 196:2011 CIE Guide to Increasing Accessibility in Light and Lighting
................................................................................................................................................................... 55
D.3 ADA Accessibility Guidelines for Buildings and Facilities . 55
D.4 BS 8300-2 2018 Design of an Accessible and Inclusive Built Environment Part 2
Buildings - Code of practice . 55
Annex ZA (informative) Relationship between this European Standard and the Essential
requirements of EU Directive (EU) 2016/797 aimed to be covered . 57
Bibliography . 61

prEN 16584-1:2022 (E)
European foreword
This document (prEN 16584-1:2022) has been prepared by Technical Committee CEN/TC 256 “Railway
applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16584-1:2017.
In comparison with the previous edition, the following technical modifications have been made:
— The document template has been updated
— The document has been revised generally for document references and editorial issues with
grammar
— Scope modified
— Normative references updated
— Terms and definitions revised
— 5.1 removed references to annexes covering EC verification and testing requirements
— 5.2.6 Platform danger area and edge of platform - Note 2 moved from 7) to 5)
— 5.2.7 End of Platform – addition of ‘contrast requirement for the barrier shall be assessed according
to ‘Free standing Device’
— 5.3.2.1 Doors General – addition of ‘Where the control is a manual device see Figure 1’
— 5.3.4 Interior doors - text modified
— 5.3.6.2 - text amended and additional Figures added
— 5.4 Boarding aids - text changed from ‘up-stand’ to ‘tapered lip’
— Annex A “EC verification - Interoperability constituents” removed
— Annex B “Summary of testing requirements” removed
— Subsequent Annexes renumbered
— Annex ZA updated.
— Bibliography updated
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
prEN 16584-1:2022 (E)
Introduction
This document is part of a suite of four ‘Design for PRM use’ standards that have in total nine parts:
— EN 16584 is a standard that covers both infrastructure and rolling stock — Railway applications —
Design for PRM use — General requirements:
— Part 1: Contrast (EN 16584-1)
— Part 2: Information (EN 16584-2)
— Part 3: Optical and friction characteristics (EN 16584-3)
— EN 16585 is a standard that covers rolling stock — Railway applications — Design for PRM use —
Equipment and componen
...