EN 13230-4:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4 : Spannbetonschwellen für Weichen und KreuzungenApplications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports précontraints pour appareil de voieRailway applications - Track - Concrete sleepers and bearers - Part 4 : Prestressed bearers for switches and crossings91.100.30Beton in betonski izdelkiConcrete and concrete products45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13230-4:2002SIST EN 13230-4:2004en01-marec-2004SIST EN 13230-4:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13230-4December 2002ICS 45.080English versionRailway applications - Track - Concrete sleepers and bearers -Part 4 : Prestressed bearers for switches and crossingsApplications ferroviaires - Voie - Traverses et supports enbéton - Partie 4 : Supports précontraints pour appareil devoieBahnanwendungen - Oberbau - Gleis- undWeichenschwellen aus Beton - Teil 4 :Spannbetonschwellen für Weichen und KreuzungenThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13230-4:2002 ESIST EN 13230-4:2004

tests.13 4.5.1 Bending moments evaluation.13 4.5.2 Concrete.14 4.5.3 Product inspection.14 4.5.4 Fastening system and electrical insulation.14 4.6 Routine tests.14 4.6.1 Positive or negative bending moment evaluations for the static test.14 4.6.2 Concrete.14 4.6.3 Product checking.14 5 Manufacturing.14 5.1 Manufacturing rules.14 5.2 Position of prestressing steel.15 5.3 Tolerance on the prestressing force.15 5.4 Additional marking.15 6 Data to be supplied.15 6.1 Data supplied by the purchaser.15 6.2 Data supplied by the supplier.15 Annex A (normative)
Detailed drawings of the test arrangements.16 A.1 Articulated support.16 A.2 Resilient pad.17 Bibliography.18
EN 13230-5. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 206-1, Concrete – Part 1: Performance, production and conformity. EN 13146-4, Railway applications - Track - Test
methods for fastening systems - Part
4: Effect of repeated loading. EN 13230-1:2002, Railway applications - Track – Concrete sleepers and bearers – Part 1: General requirements. EN 13230-5, Railway applications - Track - Concrete sleepers and bearers – Part 5: Spec
...