EN 288-5:1994

EN 288-5:1994 is a standard + national annex and/or foreword published by the European Committee for Standardization (CEN). Its full title is "Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding". This standard covers: This standard simplifies the approval of welding procedures especially for repetitive operations. This standard gives the necessary information to explain the requirements referenced in EN 288-1 about the approval of welding procedures using approved consumables. In addition it gives the range of approval and the validity. This standard applies to fusion welding of metallic materials. The process numbers refer to EN 24063. Essentially this standard covers the processes with cosumables given in table 1. [The scope of the complete standard includes a table of applicable welding processes.] Other fusion welding processes may be accepted by agreement between contracting parties. It is intended for application to parent metals hich produce acceptable micro structures and properties in the heat affected zone which do not deteriorate significantly in service. This standard is not applicable where hardness or impact properties, preheating, control heat input, interpass temperature and post-weld heat-treatment are specified. The use of this standard may also be restricted by an application standard or at the inquiry/order stage by contracting parties.

This standard simplifies the approval of welding procedures especially for repetitive operations. This standard gives the necessary information to explain the requirements referenced in EN 288-1 about the approval of welding procedures using approved consumables. In addition it gives the range of approval and the validity. This standard applies to fusion welding of metallic materials. The process numbers refer to EN 24063. Essentially this standard covers the processes with cosumables given in table 1. [The scope of the complete standard includes a table of applicable welding processes.] Other fusion welding processes may be accepted by agreement between contracting parties. It is intended for application to parent metals hich produce acceptable micro structures and properties in the heat affected zone which do not deteriorate significantly in service. This standard is not applicable where hardness or impact properties, preheating, control heat input, interpass temperature and post-weld heat-treatment are specified. The use of this standard may also be restricted by an application standard or at the inquiry/order stage by contracting parties.

EN 288-5:1994 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 288-5:1994 has the following relationships with other standards: It is inter standard links to EN ISO 15610:2003, EN 13814:2004, EN ISO 13710:2004, EN ISO 21049:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 288-5:1994 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 288-5:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.