EN 13168:2001/AC:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationToplotnoizolacijski proizvodi za stavbe – Proizvodi iz lesne volne (WW) – SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en laine de bois (WW) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Holzwolle (WW) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13168:2002/AC:2006en,deTa slovenski standard je istoveten z:EN 13168:2001/AC:200501-maj-2006SIST EN 13168:2002/AC:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13168:2001/ACDecember 2005Décembre 2005Dezember 2005ICS 91.100.60English versionVersion FrançaiseDeutsche FassungThermal insulation products for buildings - Factory made wood wool (WW)products - SpecificationProduits isolants thermiques pour lebâtiment - Produits manufacturés en lainede bois (WW) - SpécificationWärmedämmstoffe für Gebäude -Werkmäßig hergestellte Produkte ausHolzwolle (WW) - SpezifikationThis corrigendum becomes effective on 21 December 2005 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 21 décembre 2005 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 21.Dezember 2005 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13168:2001/AC:2005 D/E/F

Replace the term and the definition WW-C/3 EPS in 3.2 by the following:
WW-C/3 xx is 3-layered Composite Wood Wool board, slab in combination with xx.
NOTE
xx stands for the suitable insulation material used. 4.2.1 Thermal resistance and thermal conductivity In 4.2.1 Thermal resistance and thermal conductivity the text,  the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible; is replaced by:  for products of uniform thickness, the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible. Where appropriate, for products of non-uniform thickness (i.e. for sloped and tapered products) only the thermal conductivity, λD, shall be declared. 6 Designation code Add the following note at the end of the clause: "NOTE The characteristics determined in 4.2 are not included in the designation code if a limit value
(threshold value) is given for the product.
8 Marking and labelling Delete: "- year of manufacture (the last two digits)" D.1
The equation given in D.1 shall be numbered. Replace the last sentence and the equation in D.1 by the following: From Table D.1 deviating thicknesses, spans and widths have to be taken into consideration using the equation (D.1): )2/(2010323dbdFb⋅⋅⋅⋅⋅=σ (D.1)
where
σ b is the bending strength
F is the loading
d is the thickness
b is the width
D.2
The equation given in D.2 shall be numbered. Replace the last sentence and the equation in D.2 by the following: To determine the thermal conductivity corresponding to a conditioning atmosphere of (23 ± 2) °C and (50 ± 5) % relative humidity the equation (D.2) shall be used: [])(150,23,10uadry⋅+⋅=λλ (D.2)
where 
...