EN 15466-1:2024

SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN 15466-1:2010
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 1. del:
Določanje homogenosti
Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 1: Bestimmung der
Homogenität
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 1 :
Détermination de l'homogénéité
Ta slovenski standard je istoveten z: EN 15466-1:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 15466-1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 15466-1:2009
English Version
Primers for cold and hot applied joint sealants - Part 1:
Determination of homogeneity
Primaires pour produits de scellement de joints Voranstriche für kalt und heiß verarbeitbare
appliqués à froid et à chaud - Partie 1 : Détermination Fugenmassen - Teil 1: Bestimmung der Homogenität
de l'homogénéité
This European Standard was approved by CEN on 4 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15466-1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation and conditioning of test specimens . 4
7 Procedure. 4
7.1 General . 4
7.2 Visual assessment of the product supplied . 4
7.3 Assessment of settling behaviour of the product supplied . 5
7.4 Visual assessment after homogenization . 5
8 Expression of results . 5
8.1 Description of the product supplied . 5
8.2 Description of the product supplied after homogenization . 5
9 Test report . 5
European foreword
This document (EN 15466-1:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identi
...