EN ISO 14585:2011
(Main)Hexalobular socket pan head tapping screws (ISO 14585:2011)
Hexalobular socket pan head tapping screws (ISO 14585:2011)
ISO 14585:2011 specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.
If, in special cases, specifications other than those listed in ISO 14585:2011 are required, they can be selected from existing International Standards, for example ISO 1478, ISO 2702, ISO 4759-1.
Flachkopf-Blechschrauben mit Innensechsrund (ISO 14585:2011)
Diese Internationale Norm legt die Eigenschaften von Flachkopf-Blechschrauben mit Innensechsrund mit Gewinde von ST2,9 bis ST6,3 fest.
Werden in besonderen Fällen andere als in dieser Internationalen Norm aufgeführte Festlegungen benötigt, können diese aus bestehenden Internationalen Normen wie zum Beispiel ISO 1478, ISO 2702 und ISO 4759-1 ausgewählt werden.
Vis à tôle à tête cylindrique bombée large à six lobes internes (ISO 14585:2011)
L'ISO 14585:2011 spécifie les caractéristiques des vis à tôle à tête cylindrique bombée large à six lobes internes, de diamètre de filetage ST2,9 à ST6,3 inclus.
Si, dans des cas particuliers, des spécifications autres que celles figurant dans l'ISO 14585:2011 sont requises, elles peuvent être choisies dans les Normes internationales existantes, par exemple l'ISO 1478, l'ISO 2702 et l'ISO 4759‑1.
Notranji šestrogeljnik v polokrogli valjasti glavi pločevinskega vijaka (ISO 14585:2011)
Ta mednarodni standard določa značilnosti vijakov z notranjim šestrogeljnikom v polokrogli valjasti glavi pločevinskega vijaka z velikostmi navojev od ST2,9 do vključno ST6,3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 1478, ISO 2702, ISO 4759-1.
General Information
- Status
- Published
- Publication Date
- 14-Feb-2011
- Withdrawal Date
- 30-Aug-2011
- Technical Committee
- CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 15-Feb-2011
- Completion Date
- 15-Feb-2011
Relations
- Effective Date
- 19-Feb-2011
- Effective Date
- 12-Apr-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 12274-4:2003 - Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN ISO 14585:2011 is an international standard developed by CEN and ISO that specifies the characteristics of hexalobular socket pan head tapping screws. This standard covers screws with thread sizes ranging from ST2.9 to ST6.3 inclusive. These fastening elements are commonly used in mechanical assemblies requiring reliable and precise threaded connections.
Hexalobular socket pan head tapping screws feature a pan head design combined with an internal hexalobular (also known as Torx) socket drive, offering enhanced torque transmission and reduced cam-out compared to traditional drive types. EN ISO 14585:2011 ensures uniformity in size, mechanical properties, and tolerances for these fasteners, contributing to high-quality manufacturing and interchangeability across industries.
Key Topics
- Thread Sizes Covered: ST2.9, ST3.5, ST4.2, ST4.8, ST5.5, and ST6.3.
- Dimensions and Tolerances: Detailed dimensional specifications including thread pitch, head diameter, socket size, and length ranges. Dimensions comply with related symbols defined in ISO 225.
- Material Requirements: Steel materials as outlined in ISO 2702 for heat-treated tapping screws ensuring mechanical robustness.
- Mechanical Properties: Tapping screws must meet mechanical performance criteria per ISO 2702, focusing on strength and durability.
- Socket Drive: Standardized hexalobular socket in accordance with ISO 10664, providing superior torque control.
- Coatings and Finishes: Electroplated coatings per ISO 4042 and zinc flake coatings under ISO 10683. Additional finishes are subject to supplier-purchaser agreement.
- Inspection and Acceptability: Acceptance inspection procedures conforming to ISO 3269 for quality assurance.
- Designation Format: Standardized screw designation using thread size, length, and type (e.g., tapping screw ISO 14585 - ST3.5 × 16 - R).
Applications
Hexalobular socket pan head tapping screws specified in EN ISO 14585:2011 find applications in a wide array of industries, including:
- Automotive Assembly: Used in securing lightweight components where precise torque application is crucial.
- Electronics and Electrical Equipment: Ideal for fastening components with compact head designs and reliable drive systems.
- Machinery and Equipment Manufacturing: Suitable for equipment where durable and corrosion-resistant fasteners are essential.
- Metal Fabrication: Common in sheet metal assembly, offering strong tapping capabilities in thin metal substrates.
- Construction and HVAC Systems: Utilized where high-strength fastening is required in installation and maintenance.
The hexalobular socket drive reduces fastener cam-out, facilitating longer tool life and safer automated assembly processes with power drivers.
Related Standards
For comprehensive implementation and specification, EN ISO 14585:2011 references and complements the following related International Standards:
- ISO 1478 – Thread profile standards for tapping screws.
- ISO 2702 – Mechanical properties and material specifics for heat-treated steel tapping screws.
- ISO 4759-1 – Tolerance classes and product grade definitions for fasteners.
- ISO 10664 – Definitions related to hexalobular internal driving features.
- ISO 4042 – Standards for electroplated coatings on fasteners.
- ISO 10683 – Specifications for non-electrolytically applied zinc flake coatings.
- ISO 3269 – Acceptance inspection procedures for fasteners.
These referenced standards ensure consistency in manufacturing, coating performance, mechanical reliability, and dimensional accuracy for tapping screws compliant with EN ISO 14585:2011.
By adhering to EN ISO 14585:2011, manufacturers and users benefit from standardized dimensions, material properties, and performance criteria for hexalobular socket pan head tapping screws, promoting interoperability and quality assurance in fastener applications. This standard supports industries demanding precision fastening solutions with enhanced torque control and corrosion resistance.
Frequently Asked Questions
EN ISO 14585:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hexalobular socket pan head tapping screws (ISO 14585:2011)". This standard covers: ISO 14585:2011 specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in ISO 14585:2011 are required, they can be selected from existing International Standards, for example ISO 1478, ISO 2702, ISO 4759-1.
ISO 14585:2011 specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in ISO 14585:2011 are required, they can be selected from existing International Standards, for example ISO 1478, ISO 2702, ISO 4759-1.
EN ISO 14585:2011 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14585:2011 has the following relationships with other standards: It is inter standard links to EN ISO 14585:2001/AC:2005, EN ISO 14585:2001, EN ISO 5674:2009, EN 12625-3:1999, EN 12274-4:2003, EN ISO 6974-1:2001, EN 2794-004:2014, EN 1337-2:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14585:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2012
1DGRPHãþD
SIST EN ISO 14585:2002
SIST EN ISO 14585:2002/AC:2006
1RWUDQMLãHVWURJHOMQLNYSRORNURJOLYDOMDVWLJODYLSORþHYLQVNHJDYLMDND ,62
Hexalobular socket pan head tapping screws (ISO 14585:2011)
Flachkopf-Blechschrauben mit Innensechsrund (ISO 14585:2011)
Vis à tôle à tête cylindrique bombée large à six lobes internes (ISO 14585:2011)
Ta slovenski standard je istoveten z: EN ISO 14585:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14585
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2011
ICS 21.060.10 Supersedes EN ISO 14585:2001
English Version
Hexalobular socket pan head tapping screws (ISO 14585:2011)
Vis à tôle à tête cylindrique bombée large à six lobes Flachkopf-Blechschrauben mit Innensechsrund (ISO
internes (ISO 14585:2011) 14585:2011)
This European Standard was approved by CEN on 17 January 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14585:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 14585:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at
the latest by August 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14585:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14585:2011 has been approved by CEN as a EN ISO 14585:2011 without any modification.
INTERNATIONAL ISO
STANDARD 14585
Second edition
2011-02-15
Hexalobular socket pan head tapping
screws
Vis à tôle à tête cylindrique bombée large à six lobes internes
Reference number
ISO 14585:2011(E)
©
ISO 2011
ISO 14585:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...