CEN/TR 17653:2021
(Main)Cycles - Components and assemblies used in bicycles - Innovative requirements and test methods
Cycles - Components and assemblies used in bicycles - Innovative requirements and test methods
The purpose of this document is to provide innovative requirements and test methods applicable to any components and assemblies of any category of bicycles (city, trekking, MTB, young adult and racing). Its aim is to provide technical solutions that reduce the risk of component failure and rider injury during the specified use of such bicycles.
This document makes reference to current “state of the art” standards in the field of bicycles, agreed at CEN level through the publication of the EN ISO 4210 series of standards. Therefore, the requirements and tests proposed in this document are intended to be read and applied in accordance with the appropriate EN ISO 4210 standard.
NOTE The tests described in this document refer in places to clause numbers from the applicable EN ISO 4210 series.
Fahrräder - Verbundwerkstoffe für Fahrräder - Neue Spezifische Prüfverfahren für aus Verbundwerkstoffe hergestellte Komponenten
Cycles - Composants et assemblages utilisés dans les bicyclettes - Exigences et méthodes d'essai innovantes
Kolesa - Sestavni deli in sklopi za kolesa - Inovativne zahteve in preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 17653:2021
01-september-2021
Kolesa - Sestavni deli in sklopi za kolesa - Inovativne zahteve in preskusne metode
Cycles - Components and assemblies used in bicycles - Innovative requirements and
test methods
Fahrräder - Verbundwerkstoffe für Fahrräder - Neue Spezifische Prüfverfahren für aus
Verbundwerkstoffe hergestellte Komponenten
Ta slovenski standard je istoveten z: CEN/TR 17653:2021
ICS:
43.150 Kolesa Cycles
SIST-TP CEN/TR 17653:2021 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 17653:2021
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 17653:2021
CEN/TR 17653
TECHNICAL REPORT
RAPPORT TECHNIQUE
June 2021
TECHNISCHER BERICHT
ICS 43.150
English Version
Cycles - Components and assemblies used in bicycles -
Innovative requirements and test methods
Fahrräder - Verbundwerkstoffe für Fahrräder - Neue
Spezifische Prüfverfahren für aus Verbundwerkstoffe
hergestellte Komponenten
This Technical Report was approved by CEN on 30 May 2021. It has been drawn up by the Technical Committee CEN/TC 333.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17653:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 17653:2021
CEN/TR 17653:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Frames designed for disc brake . 4
4.1 Background . 4
4.2 Test methods . 5
4.2.1 Rear brake mount tests . 5
4.2.2 Static rear brake torque test . 5
4.2.3 Rear brake mount fatigue test . 5
5 Fork made of composite materials designed for disc brakes . 7
5.1 General . 7
5.2 Test methods . 7
6 Wheel impact test . 9
6.1 Background . 9
6.2 Requirements . 9
6.3 Test methods . 10
7 Front mudguard .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.