EN 546-3:2006

SLOVENSKI STANDARD
01-marec-2007
1DGRPHãþD
SIST EN 546-3:1998
Aluminij in aluminijeve zlitine - Folija - 3. del: Odstopki mer
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
Aluminium und Aluminiumlegierungen - Folien - Teil 3: Grenzabmaße
Aluminium et alliages d'aluminium - Feuille mince - Partie 3 : Tolérances sur dimensions
Ta slovenski standard je istoveten z: EN 546-3:2006
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 546-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 77.150.10 Supersedes EN 546-3:1996
English Version
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on
dimensions
Aluminium et alliages d'aluminium - Feuille mince - Partie 3 Aluminium und Aluminiumlegierungen - Folien - Teil 3:
: Tolérances sur dimensions Grenzabmaße
This European Standard was approved by CEN on 25 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 546-3:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Tolerances on dimensions for single-rolled foil.4
3.1 Gauge.4
3.2 Width .6
4 Tolerances on dimensions for double-rolled foil .6
4.1 Gauge.6
4.2 Width .7
Bibliography .8

Tables
Table 1 — Tolerances on average evaluation of gauge for single rolled foil .5
Table 2 — Density.6
Table 3 — Tolerance on width for single-rolled foil .6
Table 4 — Tolerances on mean measurement of gauge for double-rolled foil .7

Foreword
This document (EN 546-3:2006) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at
the latest by June 2007.
This document supersedes EN 546-3:1996.
Within its program of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 6 "Foil and
finstock" to revise EN 546-3:1996.
The following modifications have been made:
 subclause 3.1.1: the following text "… at 90 % confidence limits" has been deleted;
 subclause 3.1.2: title is changed;
 subclause 4.1.1: the following text "… at 90 % confidence limits" ha
...