EN 10232:1993
(Main)Metallic materials - Tube (in full section) - Bend test
Metallic materials - Tube (in full section) - Bend test
This European Standard specifies a method for determining the ability of full- section metallic tubes of circular cross section to undergo plastic deformation in bending. It is inteded for tubes with an outside diameter not greater than 65mm although the range of the outside diameter for which this European Standardis applicable may be more exactly specified in the relevant Product Standard.
Metallische Werkstoffe - Rohr (Rohrabschnitt) - Biegeversuch
In dieser Euorpäischen Norm ist ein Verfahren festgelegt, mit dem die Eignung von Rohren aus metallischen Werkstoffen mit kreisförmigenm Querschnitt mit maximalem Aussendruchmesser von 65mm zur Biegung bei vollem Querschnitt bestimmt wird. Der Bereich der Aussendurchmesser, für den diese Europäische Norm zutrifft, kann genauer in der entsprechenden Erzeugnisnorm festgelegt sein
Matériaux métalliques - Tubes - Essai de cintrage sur tronçons
La présente norme européenne spécifie une méthode de détermination de l'aptitude à la déformation plastique par cintrage sur tronçon de tubes métalliques, de section circulaire. Elle est applicable aux tubes de diamètre extérieur au plus égal à 65mm bien que la gamme de diamètres extérieurs à laquelle s'applique la présente norme européenne peut être détinie de façcon plus explicite dans la norme de produit concernée.
Kovinski materiali - Cev (narezana na dolžino) - Upogibni preskus
General Information
- Status
- Withdrawn
- Publication Date
- 28-Oct-1993
- Withdrawal Date
- 20-Jul-2004
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 9 - Mechanical testing of tubes
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Jul-2004
- Completion Date
- 21-Jul-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Replaced By
EN ISO 8491:2004 - Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) - Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10232:1993 is a standard published by the European Committee for Standardization (CEN). Its full title is "Metallic materials - Tube (in full section) - Bend test". This standard covers: This European Standard specifies a method for determining the ability of full- section metallic tubes of circular cross section to undergo plastic deformation in bending. It is inteded for tubes with an outside diameter not greater than 65mm although the range of the outside diameter for which this European Standardis applicable may be more exactly specified in the relevant Product Standard.
This European Standard specifies a method for determining the ability of full- section metallic tubes of circular cross section to undergo plastic deformation in bending. It is inteded for tubes with an outside diameter not greater than 65mm although the range of the outside diameter for which this European Standardis applicable may be more exactly specified in the relevant Product Standard.
EN 10232:1993 is classified under the following ICS (International Classification for Standards) categories: 77.040.10 - Mechanical testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10232:1993 has the following relationships with other standards: It is inter standard links to EN ISO 8491:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10232:1993 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10232:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski materiali - Cev (narezana na dolžino) - Upogibni preskusMetallische Werkstoffe - Rohr (Rohrabschnitt) - BiegeversuchMatériaux métalliques - Tubes - Essai de cintrage sur tronçonsMetallic materials - Tube (in full section) - Bend
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...