EN 1807:1999
(Main)Safety of woodworking machines - Band sawing machines
Safety of woodworking machines - Band sawing machines
This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings. Electrically driven machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand, excluded by the scope of this European standard, are covered by the requirements of EN 61029-1 : 1995 and prEN 61029-2-5. This European Standard covers all the hazards relevant to these machines as stated in Clause 4. This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89. This European Standard does not apply to: - hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting; - machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws. This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard.
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen
Diese Europäische Norm legt die Anforderungen und/oder Maßnahme zur Beseitigung von Gefa(hrdungen und Begrenzung der Risiken fest fu(r Bandsäge- maschinen sowohl mit Hanbeschickung und/oder Handentnahme oder automatischer Beschickung und/oder Entnahme, wie definiert (nachfolgend als "Maschinen" bezeichnet), die bestimmt sind zum Schneiden von Massivholz, Spanplatten, Faserplatten und Sperrholz sowie diesen Werkstoffen, wenn sie mit Kunststoff beschichtet oder mit Kunststoffkanten versehen sind.
Sécurité des machines pour le travail du bois - Machines à scier à ruban
La présente norme européenne spécifie les exigences et/ou les mesures qui doivent être prises pour éliminer les phénomènes dangereux et limiter les risques sur les machines à scier à ruban, munies d'un système de chargement et/ou de déchargement soit manuel, soit automatique (ci-après désignées "machines"), conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué, ainsi que ces matériaux lorsque leur surface ou leurs chants sont recouverts de plastique.
Safety of woodworking machines - Band sawing machines
General Information
- Status
- Withdrawn
- Publication Date
- 17-Aug-1999
- Withdrawal Date
- 01-Sep-2009
- Technical Committee
- CEN/TC 142 - Woodworking machines - Safety
- Drafting Committee
- CEN/TC 142/WG 3 - Bandsawing machines
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 02-Sep-2009
- Completion Date
- 02-Sep-2009
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 22-Dec-2008
- Effective Date
- 21-Jan-2009
- Revised
prEN 1807-2 - Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines - Effective Date
- 21-Jan-2009
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
EN 1807:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety of woodworking machines - Band sawing machines". This standard covers: This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings. Electrically driven machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand, excluded by the scope of this European standard, are covered by the requirements of EN 61029-1 : 1995 and prEN 61029-2-5. This European Standard covers all the hazards relevant to these machines as stated in Clause 4. This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89. This European Standard does not apply to: - hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting; - machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws. This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard.
This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings. Electrically driven machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand, excluded by the scope of this European standard, are covered by the requirements of EN 61029-1 : 1995 and prEN 61029-2-5. This European Standard covers all the hazards relevant to these machines as stated in Clause 4. This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89. This European Standard does not apply to: - hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting; - machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws. This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard.
EN 1807:1999 is classified under the following ICS (International Classification for Standards) categories: 79.120.10 - Woodworking machines. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1807:1999 has the following relationships with other standards: It is inter standard links to EN 1807:1999+A1:2009, EN 1807:1999/prA1, prEN 1807-1, prEN 1807-2. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1807:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1807:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of woodworking machines - Band sawing machinesSicherheit von Holzbearbeitungsmaschinen - BandsägemaschinenSécurité des machines pour le travail du bois - Machines a scier a rubanSafety of woodworking machines - Band sawing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1807:1999SIST EN 1807:2000en01-april-2000SIST EN 1807:2000SLOVENSKI
STANDARD
SI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...