EN ISO 28927-8:2009/A1:2015

SLOVENSKI STANDARD
01-marec-2016
5RþQDSUHQRVQDHOHNWULþQDRURGMD3UHVNXVQHPHWRGH]DYUHGQRWHQMHRGGDMDQMD
YLEUDFLMGHOäDJHSROLUQLVWURMLLQSLOHVSRYUDWQLPJLEDQMHPWHUåDJH]QLKDMQLP
DOLNURåQLPJLEDQMHP'RSROQLOR$,62$PG
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part
8: Saws, polishing and filing machines with reciprocating action and small saws with
oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces
(ISO 28927-8:2009/Amd 1:2015)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der
Schwingungsemission - Teil 8: Sägen, Feilen und Maschinen für Poliernadeln mit hin-
und hergehender Bewegung sowie kleine Sägen mit Schwing- oder Drehbewegung (ISO
28927-8:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de
vibrations - Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes
ou circulaires - Amendement 1: Polisseuses, forces d'avance modifiées (ISO 28927-
8:2009/Amd 1:2015)
Ta slovenski standard je istoveten z: EN ISO 28927-8:2009/A1:2015
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 28927-8:2009/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 25.140.10; 13.160
English Version
Hand-held portable power tools - Test methods for
evaluation of vibration emission - Part 8: Saws, polishing
and filing machines with reciprocating action and small
saws with oscillating or rotating action - Amendment 1:
Polishing machines, modified feed forces (ISO 28927-
8:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour Handgehaltene motorbetriebene Maschinen -
l'évaluation de l'émission de vibrations - Partie 8: Scies, Messverfahren zur Ermittlung der
polisseuses et limes alternatives, et petites scies Schwingungsemission - Teil 8: Sägen, Feilen und
oscillantes ou circulaires - Amendement 1: Polisseuses, Maschinen für Poliernadeln mit hin- und hergehender
forces d'avance modifiées (ISO 28927-8:2009/Amd Bewegung sowie kleine Sägen mit Schwing- oder
1:2015) Drehbewegung (ISO 28927-8:2009/Amd 1:2015)
This amendment A1 modifies the European Standard EN ISO 28927-8:2009; it was approved by CEN on 6 June 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28927-8:2009/A1:2015 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 28927-8:2009/A1:2015) has been prepared by Technical Committee ISO/TC
108 "Mechanical vibration, shock and condition monitoring" in collaboration with Technical Committee
CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 28927-8:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and
conflicting national standards shall be withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 28927-8:2009/Amd 1:2015 has been approved by CEN as EN ISO 28927-
8:2009/A1:2015 without any modification.
INTERNATIONAL ISO
STANDARD 28927-8
First edition
2009-12-15
Hand-held portable power tools — Test
methods for evaluation of vibration
emission —
Part 8:
Saws, polishing and filing machines with
reciprocating action and small saws with
oscillating or rotating action
Machines à moteur portatives — Méthodes d'essai pour l'évaluation de
l'émission de vibrations —
Partie 8: Scies, polisseuses et limes alternatives, et petites scies
oscillantes ou circulaires
Reference number
ISO 28927-8:2009(E)
©
ISO 2009
ISO 28927-8:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved

ISO 28927-8:2009(E)
Contents Page
Foreword .iv
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms, definitions and symbols .2
3.1 Terms and definitions .2
3.2 Symbols.2
4 Basic standards and vibration test codes .3
5 Description of the family of machines .3
6 Characterization of vibration.6
6.1 Direction of measurement .6
6.2 Location of measurements.6
6.3 Magnitude of vibration.11
6.4 Combination of vibration directions.11
7 Instrumentation requirements.11
7.1 General .11
7.2 Mounting of transducers .11
7.2.1 Specification of transducer .11
7.2.2 Fastening of transducers.12
7.3 Frequency weighting filter.12
7.4 Integration time.12
7.5 Auxiliary equipment .12
7.6 Calibration.12
8 Testing and operating conditions of the machinery.13
8.1 General .13
8.2 Operating conditions .13
8.2.1 Pneumatic machines.13
8.2.2 Hydraulic machines.13
8.2.3 Electrical machines .13
8.3 Other quantities to be specified.13
8.4 Attached equipment, work piece and task.13
8.4.1 General .13
8.4.2 Test set-up, conditions and procedures.14
8.5 Operators.17
9 Measurement procedure and validity.17
9.1 Reported vibration values .17
9.2 Declaration and verification of the vibration emission value .18
10 Measurement report .18
Annex A (informative) Model test report for vibration emission of saws and files.20
Annex B (normative) Determination of uncertainty.22
Bibliography.24

SIST EN ISO 28927-8:2010/A1:201
...