iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15543:2008/AC:2008

(Corrigendum)

Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

TC - Modification to Table 4 in E reference version and in F and D translations.

Verpackungen aus Glas - Flaschenverschlüsse - Schraubmundstücke für Flaschen für nicht kohlensäurehaltige Flüssigkeiten

Emballages en verre - Bagues pour bouteilles - Bagues à vis pour bouteilles contenant des liquides non carbonatés

Steklena embalaža - Grla za steklenice - Grla z navojem za steklenice za negazirane tekočine - Popravek AC

General Information

Status
Published
Publication Date
16-Dec-2008
ICS
55.100 - Bottles. Pots. Jars
Technical Committee
CEN/TC 261 - Packaging
Drafting Committee
CEN/TC 261/SC 5/WG 21 - Glass packaging
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Dec-2008
Completion Date
17-Dec-2008
Ref Project
SIST EN 15543:2008/AC:2009 - Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids - Corrigendum AC

Relations

Corrects
EN 15543:2008 - Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
Effective Date
22-Dec-2008

Buy Standard

EN 15543:2008/AC:2009EN 15543:2008/AC:2009
PreviousNext
Corrigendum
EN 15543:2008/AC:2009
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Flaschenverschlüsse - Schraubmundstücke für Flaschen für nicht kohlensäurehaltige Flüssigkeiten - Berichtigung ACEmballages en verre - Bagues pour bouteilles - Bagues à vis pour bouteilles contenant des liquides non carbonatés - Corrigendum ACGlass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids - Corrigendum AC55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 15543:2008/AC:2008SIST EN 15543:2008/AC:2009en,fr,de01-marec-2009SIST EN 15543:2008/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15543:2008/AC
December 2008
Décembre 2008
Dezember 2008 ICS 55.100 English version Version Française Deutsche Fassung
Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
Emballages en verre - Bagues pour bouteilles - Bagues à vis pour bouteilles contenant des liquides non carbonatés
Verpackungen aus Glas - Flaschenverschlüsse - Schraubmundstücke für Flaschen f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17829:2023(Main)
Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
SIST EN 17829:2023

This document specifies the dimensions of the various 28 mm screw finishes for glass containers designated MCA.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17827:2023(Main)
Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm)
SIST EN 17827:2023

This document gives dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the "traditional method", with a diameter of 26 mm, 29 mm or 36 mm.
NOTE 1   The finish is to receive a crown cap and a cork stopper.
NOTE 2   The dimensions of the 26 mm and 29 mm finish come from the French standard NF H 35-029.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17665:2022+A1:2023(Main + Amendment)
Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers
SIST EN 17665:2022+A1:2023

This document specifies the requirements and test methods to demonstrate that plastic caps and lids of single-use beverage containers with a capacity of up to three litres remain attached to the container during the product’s intended use stage. This document also addresses the need to ensure the necessary strength, reliability and safety of beverage container closures, including those for carbonated drinks.
This document applies to the strength, reliability and safety impacted by the attachment features and does not apply to the overall closure system.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16592:2022(Main)
Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
SIST EN 16592:2023

This document specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages.
This document applies to finishes designated as PET finishes 29/25 (12,6). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish can be used for aseptic filling and filling which utilizes nitrogen pressure where the internal overpressure does not exceed 1 bar maximum.
This finish is designed to accept only a tamper evident plastic closure, including those with an attachment feature.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16293:2020(Main)
Packaging - Glass Packaging - Deep BVS finishes for still wines
SIST EN 16293:2020

This document specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 g per litre.
NOTE   Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12822:2020(Main)
Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
SIST EN ISO 12822:2020

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12821:2019(Main)
Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
SIST EN ISO 12821:2020

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17177:2019(Main)
Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
SIST EN 17177:2019

This document specifies the dimensional requirements for the 26 mm diameter, 6 mm height crown cap, lined with a plastic gasket and designed to seal bottles with neck finishes foreseen for pry-off or twist-crown applications.
It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.
The gasket material and profile are not specified as a number of different profiles are available depending on the end use and supplier specific technology. The requirement placed on the gasket profile design is that it needs to be fit for purpose used in conjunction with glass finishes in reference.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12726:2018(Main)
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
SIST EN 12726:2018

This European Standard specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 1,2 g CO2/l, for use with natural corks.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12818:2015(Main)
Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
SIST EN ISO 12818:2015

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The tolerances concerned are brimful capacity, height, diameter and width, and verticality.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day