EN 12595:1999
(Main)Bitumen and bituminous binders - Determination of kinematic viscosity
Bitumen and bituminous binders - Determination of kinematic viscosity
This European Standard specifies a method for the determination of the kinematic viscosity of bituminous binders at 60°C and 135°C, in the range from 6 mm2/s to 300 000 mm2/s. Results from the method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined. WARNING: The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskosität
Dieses Verfahren beschreibt die Bestimmung der kinematischen Viskosität von bitumenhaltigen Bindemitteln bei 60°C und 135°C im Bereich von 6 mm2/s bis 300000 mm2/s. Mit den Ergebnissen dieses Verfahrens können Viskositäten berechnet werden, wenn die Dichte des Materials bei der Prüftemperatur bekannt ist oder bestimmt werden kann. WARNUNG: Die Anwendung dieser Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. In der Norm werden nicht alle Sicherheitsprobleme angesprochen, die mit ihrer Anwendung verbunden sind.
Bitumes et liants bitumineux - Détermination de la viscosité cinématique
Cette norme européenne prescrit une méthode de détermination de la viscosité cinématique de liants bitumineux à 60°C et 135°C, dans l'intervalle de 6 mm2/s à 300 000 mm2/s. Les résultats de la méthode décrite peuvent être utilisés pour calculer la viscosité dynamique quand la masse volumique du matériau d'essai est connue ou peut être déterminée. AVERTISSEMENT: L'utilisation de la présente norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux.
Bitumen in bitumenska veziva - Določevanje kinematične viskoznosti
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 13-Mar-2007
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336 - Bituminous binders
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Mar-2007
- Completion Date
- 14-Mar-2007
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ABS Quality Evaluations Inc.
American Bureau of Shipping quality certification.
Element Materials Technology
Materials testing and product certification.
ICC Evaluation Service
Building products evaluation and certification.
Sponsored listings
Frequently Asked Questions
EN 12595:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of kinematic viscosity". This standard covers: This European Standard specifies a method for the determination of the kinematic viscosity of bituminous binders at 60°C and 135°C, in the range from 6 mm2/s to 300 000 mm2/s. Results from the method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined. WARNING: The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use.
This European Standard specifies a method for the determination of the kinematic viscosity of bituminous binders at 60°C and 135°C, in the range from 6 mm2/s to 300 000 mm2/s. Results from the method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined. WARNING: The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use.
EN 12595:1999 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12595:1999 has the following relationships with other standards: It is inter standard links to EN 12595:2007, EN ISO 10438-3:2007, EN ISO 13710:2004, EN 13108-3:2006, EN ISO 13631:2002; is excused to EN 12596:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12595:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2000
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHNLQHPDWLþQHYLVNR]QRVWL
Bitumen and bituminous binders - Determination of kinematic viscosity
Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskosität
Bitumes et liants bitumineux - Détermination de la viscosité cinématique
Ta slovenski standard je istoveten
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...