EN 13630-12:2025

SLOVENSKI STANDARD
01-december-2025
Eksplozivi za civilno uporabo - Detonacijske in počasi goreče vžigalne vrvice - 12.
del: Ugotavljanje hitrosti gorenja počasi gorečih vžigalnih vrvic
Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of
burning duration of safety fuses
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil
12: Bestimmung der Brenndauer von Sicherheitsanzündschnüren
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 12:
Détermination de la durée de combustion des mèches de sûreté
Ta slovenski standard je istoveten z: EN 13630-12:2025
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13630-12
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2025
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes EN 13630-12:2002
English Version
Explosives for civil uses - Detonating cords and safety
fuses - Part 12: Determination of burning duration of
safety fuses
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partie 12 : Détermination de la durée de Sicherheitsanzündschnüre - Teil 12: Bestimmung der
combustion des mèches de sûreté Brenndauer von Sicherheitsanzündschnüren
This European Standard was approved by CEN on 15 September 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13630-12:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
6 Preparation of test sample . 6
7 Procedure . 6
7.1 General. 6
7.2 Test without confinement . 6
7.3 Test under confinement . 7
8 Expression of results . 7
9 Test report . 7
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/28/EU relating to the making available on the
market and supervision of explosives for civil uses aimed to be covered . 8
Bibliography . 9
European foreword
This document (EN 13630-12:2025) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2026, and conflicting national standards shall be
withdrawn at the latest by April 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13630-12:2002.
EN 13630-12:2002:
a) the Scope has been revised to clarify the explosives covered and not covered in the document;
b) the normative references have been updated;
c) the Clause 4 “Principle” has been added;
d) the Clause “Apparatus” has been updated;
e) the Clause “Test pieces” is now called “Preparation of test sample” and contains the conditioning of
the test pieces;
f) the Clause “Procedure” has been updated and does no longer contain the conditioning of the test
pieces;
g) the Clause 8 “Expression of results” has been added;
h) the Clause “Test report” does no longer require conformity with EN ISO/IEC 17025 and the
information to be provided has been updated and extended;
i) the former Annex A “Range of applicability of the test method” has been removed;
j) the Annex ZA has been updated;
k) the Bibliography has been added and lists EN ISO/IEC 17025:2017.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
A list of all parts in the EN 13630 series, published under the general title Explosives for civil uses —
Detonating cords and safety fuses, can be found on the CEN website.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of t
...