EN 13920-9:2003
(Main)Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials
This part of this European Standard specifies the characteristics, chemical composition and metal yield of the aluminium scrap fraction obtained by flotation or other separation processes of non ferrous shredded materials. It applies to scrap consisting mainly of aluminium castings, but also containing aluminium scrap from wrought products. EXAMPLE The aluminium fraction as obtained by flotation of the material described in prEN 132/200-8.
Aluminium und Aluminiumlegierungen - Schrott - Teil 9: Schrott aus Aluminiumseparationsverfahren von geschredderten Nichteisenmaterialien
Diese Europäische Norm legt die Anforderungen an die Eigenschaften, chemische Zusammensetzung und Metallausbeute der Aluminiumschrottfraktion fest, die durch Flotation oder andere Separationsverfahren von geschredderten Nichteisenmaterialien gewonnen wird. Sie besteht hauptsächlich aus Schrott von Aluminium-Gussstücken, enthält aber auch Schrott von Aluminium-Kneterzeugnissen.
BEISPIEL Die Aluminiumfraktion, die durch Flotation aus dem Material gewonnen wird, das in EN 13920-8 festgelegt ist.
Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 9: Scrap d'aluminium provenant des procédés de séparation des résidus non-ferreux de broyage
Cette Norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal de la fraction de scrap d'aluminium obtenue par séparation par liquide dense ou autre procédé de séparation de matériaux désintégrés non-ferreux. Le produit consiste principalement en pièces moulées d'aluminium, mais comporte également du scrap d'aluminium de produits corroyés.
EXEMPLE Fraction d'aluminium obtenue par traitment par liquide dense du scrap spécifiée dans le prEN 13920-8.
Aluminij in aluminijeve zlitine – Odpadni aluminij – 9. del: Odpadek iz separacijskega procesa drobljenih-sekanih neželeznih materialov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 9. del: Odpadek iz separacijskega procesa drobljenih-sekanih neželeznih materialovAluminium und Aluminiumlegierungen - Schrott - Teil 9: Schrott aus Aluminiumseparationsverfahren von geschredderten NichteisenmaterialienAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 9: Scrap d'aluminium provenant des procédés de séparation des résidus non-ferreux de broyageAluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-9:2003SIST EN 13920-9:2004en01-januar-2004SIST EN 13920-9:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-9April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 9: Scrap fromaluminium separation processes of non-ferrous shreddedmaterialsAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 9: Scrap d'aluminiumprovenant des procédés de séparation des résidus non-ferreux de broyageAluminium und Aluminiumlegierungen - Schrott - Teil 9:Schrott aus Aluminiumseparationsverfahren vongeschredderten NichteisenmaterialienThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-9:2003 ESIST EN 13920-9:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.