Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing (ISO-E10:1994)

A specimen of the textile is wrapped around a perforated cylinder, and steam passed through it for 15 min. The change in colour of the dried specimen is assessed with the grey scale. Correct handling of the method is controlled by use of a test-control specimen tested under identical conditions. Two tests, mild and severe, are given.

Textilien - Farbechtheitsprüfungen - Teil E10: Farbechtheit gegen Dekatieren (ISO 105-E10:1994)

Dieser Teil von ISO 105 beschreibt ein Prüfverfahren zur Bestimmung der Widerstandsfähigkeit der Farbe von Textilien jeder Art und in allen Verarbeitungßuständen gegen die Einwirkung von Dampf, wie er beim Dekatieren von Wollgeweben verwendet wird. Zwei verschiedene Prüfbedingungen, leicht und schwer, sind vorgesehen.

Textiles - Essais de solidité des teintures - Partie E10: Solidité des teintures au décatissage (ISO 105-E10:1994)

La présente partie de l'ISO 105 prescrit une méthode pour la détermination de la résistance des teintures sur les textiles à l'action de la vapeur, telle qu'elle est utilisée pour le traitement de décatissage des tissus de laine. Deux degrés d'épreuve -- doux et sévère -- sont indiqués.

Tekstilije - Preskušanje barvne obstojnosti - Del E10: Barvna obsojnost pri dekatiranju (ISO-E10:1994)

General Information

Status
Published
Publication Date
20-Aug-1996
Withdrawal Date
27-Feb-1997
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
14-Jun-2006
Completion Date
14-Jun-2006

Buy Standard

Standard
EN ISO 105-E10:1999
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilije - Preskušanje barvne obstojnosti - Del E10: Barvna obsojnost pri dekatiranju (ISO-E10:1994)Textilien - Farbechtheitsprüfungen - Teil E10: Farbechtheit gegen Dekatieren (ISO 105-E10:1994)Textiles - Essais de solidité des teintures - Partie E10: Solidité des teintures au décatissage (ISO 105-E10:1994)Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing (ISO-E10:1994)59.080.01Tekstilije na splošnoTextiles in generalICS:Ta slovenski standard je istoveten z:EN ISO 105-E10:1996SIST EN ISO 105-E10:1999en01-marec-1999SIST EN ISO 105-E10:1999SLOVENSKI
STANDARD
INTERNATIONAL STANDARD ISO 105-El0 Third edition 1994-09-15 Textiles - Tests for colour fastness - Part EIO: Colour fastness to decatizing Textiles - Essais de solidite des teintures - Partie E IO: Solidite des teintures au dhcatissage Reference number ISO 105-E10:1994(E) SIST EN ISO 105-E10:1999

ISO 105-E10:1994(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 105-El0 was prepared by Technical Committee ISOnC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and coloran ts. This third edition cancels and replaces the second edition (ISO 105-E10:1987), of which it constitutes a technical revision. ISO 105 was previously published in thirteen “Parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Esch part contained a series of “sections”, each designated by the re- spective patt letter and by a two-digit serial number (e.g. “Section AO1 “1. These sections are now being republished as separate documents, them- selves designated “Parts” but retaining their earlier alphanumeric desig- nations. A complete list of these Parts is given in ISO 105-AO?. 0 ISO 1994 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 105-E10:1999

INTERNATIONAL STANDARD 0 ISO ISO 105-E10:1994(E) Textiles - Tests for colour fastness - Part EIO: Colour fastness to decatizing 1 Scope This part of ISO 105 specifies a method for deter- mining the resistance of the colour of textiles to the action of steam, as employed in the decatizing of wool fabrics. Two tests, mild and severe, are given. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-AOI : 1994, Textiles - Tests for colour fast- ness - Part AO?: General principles of testing. ISO 105-A02:1993, Textiles - Tests for colour fast- ness - Part A02: Grey scale for assessing Change in colour. ISO 105-F:1985, Textiles - Tests for colour fastness - Part F: Standard adjacent fabrics. 3 Principle A specimen of the textile is wrapped round a perfo- rated cylinder, and steam passed through it for ‘15 min. The Change in colour of the dried specimen is assessed by comparison with the grey scale. Cor- rect application of the method is controlled by use of a test-cont
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.