iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 20696:2018

(Main)

Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2019-12)

Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2019-12)

This document specifies requirements and test methods for sterile urethral catheters for single use, with or without a balloon.
This document does not include drainage catheters covered by ISO 20697, e.g. ureteral catheters, nephrostomy catheters, and suprapubic catheters. This document also excludes ureteral stents.
NOTE       Ureteral stents are covered in ASTM F1828‑97.

Sterile Harnblasenkatheter zur einmaligen Verwendung (ISO 20696:2018, korrigierte Fassung 2019-12)

Dieses Dokument legt Anforderungen und Prüfverfahren für sterile Harnblasenkatheter mit und ohne Ballon
zur einmaligen Verwendung fest.
Dieses Dokument schließt nicht Drainagekatheter mit ein, die in ISO 20697 behandelt werden, z. B.
Ureterkatheter, Nephrostomiekatheter und suprapubische Katheter. Des Weiteren sind auch Ureterstents
von diesem Dokument ausgeschlossen.
ANMERKUNG Ureterstents sind Gegenstand der Norm ASTM F1828-97.

Sondes urinaires stériles non réutilisables (ISO 20696:2018, Version corrigée 2019-12)

Le présent document spécifie les exigences et les méthodes d'essai pour les sondes urinaires stériles non réutilisables, avec ou sans ballonnet.
Le présent document n'inclut pas les sondes de drainage couvertes par l'ISO 20697, telles que les sondes urinaires, les sondes de néphrostomie et les cathéters sus-pubiens. Le présent document exclut également les endoprothèses urétérales.
NOTE       Les endoprothèses urétérales sont couvertes par l'ASTM F1828‑97.

Sterilni uretralni katetri za enkratno uporabo (ISO 20696:2018)

Ta standard določa zahteve za sterilne uretralne katetre za enkratno uporabo z balonom ali brez.

General Information

Status
Published
Publication Date
03-Jul-2018
Withdrawal Date
30-Jan-2019
ICS
11.040.25 - Syringes, needles an catheters
Technical Committee
CEN/TC 205 - Non-active medical devices
Drafting Committee
CEN/TC 205/WG 16 - Catheters
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Jul-2018
Completion Date
04-Jul-2018
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN ISO 20696:2018 - Sterile urethral catheters for single use (ISO 20696:2018)

Relations

Replaces
EN 1616:1997 - Sterile urethral catheters for single use
Effective Date
08-Jun-2022
Replaces
EN 1616:1997/A1:1999 - Sterile urethral catheters for single use
Effective Date
15-Jul-2018

Buy Standard

EN ISO 20696:2018EN ISO 20696:2018
PreviousNext
Standard
EN ISO 20696:2018
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST EN 1616:2000
SIST EN 1616:2000/A1:2000
Sterilni uretralni katetri za enkratno uporabo (ISO 20696:2018)
Sterile urethral catheters for single use (ISO 20696:2018)
Sterile Harnblasenkatheter zur einmaligen Verwendung (ISO 20696:2018)
Sondes urinaires stériles non réutilisables (ISO 20696:2018)
Ta slovenski standard je istoveten z: EN ISO 20696:2018
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20696
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 11.040.25 Supersedes EN 1616:1997
English Version
Sterile urethral catheters for single use (ISO 20696:2018)
Sondes urinaires stériles non réutilisables (ISO Sterile Harnblasenkatheter zur einmaligen
20696:2018) Verwendung (ISO 20696:2018)
This European Standard was approved by CEN on 5 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20696:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 20696:2018) has been prepared by Technical Committee ISO/TC 84 " Devices
for administration of medicinal products and catheters " in collaboration with Technical Committee
CEN/TC 205 “Non-active medical devices” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1616:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20696:2018 has been approved by CEN as EN ISO 20696:2018 without any modification.
INTERNATIONAL ISO
STANDARD 20696
First edition
2018-06
Sterile urethral catheters for single use
Sondes urinaires stériles non réutilisables
Reference number
ISO 20696:2018(E)
©
ISO 2018
ISO 20696:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 20696:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Intended performance . 3
5 General requirements . 3
5.1 Risk management . 3
5.2 Biocompatibility . 3
5.3 Detectability . 3
5.4 Surface finish . 3
5.5 Size designation . 3
5.5.1 General. 3
5.5.2 Outer diameter . 3
5.5.3 Effective shaft lengths . 4
5.6 MRI compatibility . 5
5.7 Connector . 5
5.8 Sterilization . 5
6 Specific requirements . 5
6.1 Strength . 5
6.2 Connector security . . 5
6.3 Balloon safety . 5
6.4 Catheter inflation lumen integrity and volume maintenance . 5
6.4.1 General. 5
6.4.2 Compliant balloon. 6
6.4.3 Non-compliant balloon . 6
6.5 Flow rate . 6
6.6 Corrosion resistance . 7
6.7 Kink stability . 7
6.8 Peak tensile force . 7
6.9 Inflated balloon resistance to traction . . 7
7 Information to be supplied by the manufacturer . 8
7.1 General . 8
7.2 Marking on the device and/or packaging . 8
7.3 Instructions for use . 8
Annex A (normative) Test method for determining the strength of the catheter .10
Annex B (normative) Test method for determining the security of fit of the drainage funnel .14
Annex C (normative) Test method for determining balloon safety .16
Annex D (normative) Test method for determining inflation lumen leakage and/or function
and/or balloon deflation (catheter with compliant balloon) .19
Annex E (normative) Test method for determination of flow rate through catheter .21
Annex F (normative) Test method for corrosion resistance .23
Annex G (informative) Test method for determining kink stability .24
Annex H (normative) Test method for determining peak tensile force of urethral catheter .26
Annex I (normative) Test method for determining balloon size deflation reliability
(catheter with non-compliant balloon) .28
Annex J (normative) Test method for determining inflated balloon resistance to traction .30
ISO 20696:2018(E)
Bibliography .34
iv © ISO 2018 – All rights reserved

ISO 20696:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The w
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10555-1:2023(Main)
Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2023)
SIST EN ISO 10555-1:2024

This document specifies general requirements for intravascular catheters, supplied sterile and intended for single use, for any application.
This document does not apply to intravascular catheter accessories, e.g. those covered by ISO 11070.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10555-4:2023(Main)
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2023)
SIST EN ISO 10555-4:2024

This document specifies requirements for balloon dilatation catheters supplied sterile and intended for single use.
This document does not specify requirements for vascular stents (see ISO 25539-2).
NOTE            Guidance on the selection of balloon materials is given in Annex G.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-5:2023(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2022)
SIST EN ISO 11608-5:2023

This part of ISO 11608 specifies requirements and test methods for needle-based injection systems with automated functions (referred to in the standard as NIS-AUTO), for the administration of medicinal products in humans. This document does not cover remote communication from the NIS-AUTO.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-3:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths (ISO 11608-3:2022, Corrected version 2023-01)
SIST EN ISO 11608-3:2022

This document specifies requirements and test methods for design verification of containers and integrated fluid paths used with Needle-Based Injection Systems (NISs) according to ISO 11608-1.
It is applicable to single and multi-dose containers either filled by the manufacturer (primary container closure) or by the end-user (reservoir) (e.g. cartridges, syringes) and fluid paths that are integrated with the NIS at the point of manufacture.
This document is also applicable to prefilled syringes (see ISO 11040-8) when used with a NIS (see also scope of ISO 11608-1:2022).
This document is not applicable to the following products:
—    sterile hypodermic needles;
—    sterile hypodermic syringes;
—    sterile single-use syringes, with or without needle, for insulin;
—    containers that can be refilled multiple times;
—    containers intended for dental use;
—    catheters or infusion sets that are attached or assembled separately by the user.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-1:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022)
SIST EN ISO 11608-1:2022

This document specifies requirements and test methods for Needle-Based Injection Systems (NISs) for single-patient use intended to deliver discrete volumes (bolus) of medicinal product, which can be delivered through needles or soft cannulas for intradermal, subcutaneous and/or intramuscular delivery, incorporating pre-filled or user-filled, replaceable or non-replaceable containers.
This document applies in cases where the NIS incorporates a prefilled syringe. However, stand-alone prefilled syringes defined by ISO 11040-8 are not covered by this document (see exclusions below).
It is important to note that other functions and characteristics of the prefilled syringe, such as dose accuracy, are subject to the requirements (delivered volume) in ISO 11040-8 and not this document, unless the addition impacts the delivery function (e.g. a mechanism that intends to restrict or stop the plunger movement, which would limit the dose delivered). In that case, the system is completely covered by this document and applicable requirements of the ISO 11608 series.
Excluded from the scope are:
—    stand-alone prefilled syringes defined by ISO 11040-8 (with noted exceptions above);
—    NISs that provide continuous delivery and require a delivery rate clinically specified in the medicinal product labelling or determined by a physician based on clinical relevance (i.e. medication efficacy) as would be the case with insulin patch pumps or traditional infusion pumps (e.g. IEC 60601-2-24, ISO 28620) associated with continuous delivery of medicinal products (e.g. insulin);
—    NISs with containers that can be refilled multiple times;
—    requirements relating to methods or equipment associated with user filling of containers unless they are dedicated accessories (a component necessary for primary function, whether included in the original kitted product or not);
—    NISs intended for dental use;
—    NISs intended for different routes of administration (e.g. intravenous, intrathecal, intraocular).
NOTE       These products that are excluded might benefit from elements in this document but might not completely fulfil the basic safety and effectiveness of such products.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-4:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022)
SIST EN ISO 11608-4:2022

This document specifies requirements and test methods for needle-based injection systems (NISs) containing electronics with or without software (NIS-Es).
The needle-based injection system containing electronics can be single use or reusable and can be operated with or without electrical/conductive connections to other devices. The system is intended to deliver medication to a patient by self-administration or by administration by one other operator (e.g. caregiver or health care provider).
This document applies to electronic accessories that are intended to be physically connected to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document also applies to electronic accessories that are intended to have electrical/conductive connections to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document does not specify requirements for software in programmable NIS-E.
NOTE       IEC 60601-1:2005+AMD1:2012+AMD2:2020, Clause 14 addresses software life cycle processes.
This document does not specify requirements for cybersecurity.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-2:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022)
SIST EN ISO 11608-2:2022

This document specifies requirements and test methods for single-use, double-ended, sterile needles intended to be used with some needle-based injection systems (NISs) that use a non-integrated double-ended needle according to ISO 11608-1.
This document is not applicable to the following:
—    needles for dental use;
—    pre-attached syringe needles;
—    hypodermic needles;
—    needles intended for different routes of administration (e.g. intravenous, intrathecal, intraocular);
—    materials that form the medicinal product contact surfaces of the primary container closure.
However, while this document is not intended to directly apply to these needle products, it does contain requirements and tests methods that can be used to help design and evaluate them.
NOTE       Needles provided by the manufacturer integrated into the fluid path or container are covered in ISO 11608‑3, and hypodermic needles provided separately are covered in ISO 7864.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7886-3:2020(Main)
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization (ISO 7886-3:2020)
SIST EN ISO 7886-3:2020

This document specifies the properties and performance of sterile single-use hypodermic syringes with an auto-disable syringe feature intended to deliver a fixed dose of vaccine immediately after filling. The syringes can be made of plastic, rubber or other materials and can be with or without needle and needle protection feature.
This document does not specify the design of the auto-disable syringe feature.
This document is not applicable to syringes for use with insulin (covered by ISO 8537), syringes for use with power-driven syringe pumps (covered by ISO 7886-2), reuse prevention syringes (covered by ISO 7886-4) or syringes designed to be prefilled (covered by the ISO 11040 series). It does not address compatibility with injection fluids/vaccines.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7886-2:2020(Main)
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
SIST EN ISO 7886-2:2020

This document specifies requirements for sterile single-use hypodermic syringes of nominal capacity 1 ml and above, made of plastic materials and intended for use with power-driven syringe pumps.
This document does not apply to syringes with auto-disable syringe features (ISO 7886-3[2]), syringes for use with insulin (ISO 8537[3]), single-use syringes made of glass, syringes prefilled with the injection by the manufacturer and syringes supplied with the injection as a kit for filling by a pharmacist. It does not address compatibility with injection fluids.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20695:2020(Main)
Enteral feeding systems - Design and testing (ISO 20695:2020)
SIST EN ISO 20695:2020

This document specifies requirements for enteral feeding systems comprising enteral giving sets, enteral extension sets, enteral syringes, enteral feeding catheters, and enteral accessories.
This document is not applicable to oral syringes.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day