EN 14296:2015

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitarna oprema - Skupinska umivalna koritaSanitärausstattungsgegenstände - ReihenwaschanlagenAppareils sanitaires - Lavabos collectifsSanitary appliances - Communal washing troughs91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 14296:2015SIST EN 14296:2015en,fr,de01-oktober-2015SIST EN 14296:2015SLOVENSKI
STANDARDSIST EN 14296:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14296
July 2015 ICS 91.140.70 Supersedes EN 14296:2005English Version
Sanitary appliances - Communal washing troughs
Appareils sanitaires - Lavabos collectifs
Sanitärausstattungsgegenstände - Reihenwaschanlagen This European Standard was approved by CEN on 28 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14296:2015 ESIST EN 14296:2015

Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 14 ZA.1 Scope and relevant characteristics . 14 ZA.2 Procedure for assessment and verification of constancy of performance (AVCP) of communal washing troughs . 15 ZA.2.1 System of AVCP . 15 ZA.2.2 Declaration of performance (DoP) . 15 ZA.2.2.1 General . 15 ZA.2.2.2 Content . 16 ZA.2.2.3 Examples of DoP . 16 ZA.3 CE marking and labelling . 21 Bibliography . 23 SIST EN 14296:2015

a) Wall mounted trough, viewed from the side Dimensions in millimetres
b) Wall mounted trough, viewed from above
c) Free standing trough, viewed from the side
d) Free standing trough, viewed from above Key 1 one bag of 250,50+kg or two bags of 12,50,250+kg Figure 1 — Installation for load test - Test on the rim Note any crack, collapse or permanent distortion preventing water from draining trough the waste hole. SIST EN 14296:2015

a) Wall mounted trough, viewed from the side
b) Wall mounted trough, viewed from above
c) Free standing trough, viewed from the side
d) Free standing trough, viewed from above Key 1 three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2 — Installation for load test - Test on the rim Note any crack, or collapse of the trough. SIST EN 14296:2015

a) Wall mounted trough, viewed from the side Dimensions in millimetres
b) Wall mounted trough - Viewed from above
c) Free standing trough, viewed from the side
d) Free standing trough, viewed from above Key 1 one bag of 250,50+kg or two bags of 12,50,250+kg Figure 3 — Installation for load test - Test on the bottom SIST EN 14296:2015

Personal hygiene. EXAMPLE 2 Use of abbreviation: PH. For communal washing troughs a set of requirements to be tested (see 8.2.2) is defined. Due to this, a communal washing trough can be described with a designation code which includes all fulfilled essential requirements. The relevant product characteristics and the Essential Characteristics for communal washing troughs including their abbreviations are given in Table 1. Table 1 — Characteristics and abbreviations Abbreviation Characteristics EN 14296 Number of European Standard for communal washing troughs for product description CA Cleanability LR Load resistance DA Durability
All communal washing troughs shall be designated in accordance with the following system: SIST EN 14296:2015

The declaration of the characteristics of the second line is considered being covered by the declaration of the relevant class. However, the characteristics should be listed when one of those characteristics is not declared. EXAMPLE 3 Communal washing trough for which all Essential Characteristics in accordance with Annex ZA are satisfied: EN 14296 EXAMPLE 4 Communal washing trough for which the manufacturer has exercised the NPD option for load resistance: EN 14296 — LR/NPD 8 Assessment and verification of constancy of performance – AVCP 8.1 General The compliance of communal washing troughs with the requirements of this standard and with the performances declared by the manufacturer in the DoP shall be demonstrated by: — Determination of the product type (see 8.2); — Factory production control by the manufacturer (FPC), including product assessment (see 8.3). 8.2 Type testing 8.2.1 General All performances related to characteristics included in this standard shall be determined when the manufacturer intends to declare the respective performances unless the standard gives provisions for declaring them without performing tests. (e.g. use of previously existing data, CWF
...