EN 4842:2019

SLOVENSKI STANDARD
01-september-2019
Aeronavtika - X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) -
Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250
mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or
VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤
250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen (ESR oder VAR - lösungsgeglüht und ausgelagert (H1025) - Stangen
zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa -
Beste Güte (pq)
Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR
ou VAR) - Mis en solution et vieilli (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1
070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)
Ta slovenski standard je istoveten z: EN 4842:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4842
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable
electrode remelted (ESR or VAR) - Solution treated and
precipitation treated (H1025) - Bar for machining - a or D
≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium
quality (pq)
Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit
l'électrode consommable (ESR ou VAR) - Mis en selbstverzehrender Elektrode umgeschmolzen (ESR
solution et vieilli (H1025) - Barres pour usinage - a ou oder VAR - lösungsgeglüht und ausgelagert (H1025) -
D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première Stangen zur spanenden Bearbeitung - a oder D ≤ 250
qualité (pq)
mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)
This European Standard was approved by CEN on 14 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4842:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6

European foreword
This document (EN 4842:2019) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2019, and conflicting national standards shall be withdrawn
at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Introduction
This document is part of the series of EN metallic material standards for aerospace applications. The
general organization of this series is described in EN 4258.
This document has been prepared in accordance with EN 4500-005.
...