Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936 - Choice of procedures

This CEN Technical Report describes how the measuring procedures for chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13890, EN 13936 and/or the EN 13205 series, as far as applicable, have been chosen.
This document refers on the selection of chemical agents and related substance groups and the establishment of corresponding method lists. It describes the evaluation of available measuring procedures in order to select for a particular chemical agent the most appropriate one.
This document is also intended to:
-   provide a means to compare for a given chemical agent a new measuring procedure with those listed in the database GESTIS Analytical methods [2];
-   to evaluate and rate a given measuring procedure (from an accepted source) for a given chemical agent not yet selected in the database GESTIS Analytical methods [2].

Exposition am Arbeitsplatz - Messung von chemischen Arbeitsstoffen, welche die Anforderungen nach EN 482 sowie nach einer von EN 838, EN 1076, EN 13205, EN 13890 und EN 13936 erfüllen - Auswahl von Verfahren

Exposition sur les lieux de travail - Mesurage des agents chimiques conformément aux exigences de l'EN 482 et de l'une des normes EN 838, EN 1076, EN 13205, EN 13890 et EN 13936 - Choix des procédures

Le présent Rapport technique du CEN (WI 00137065) décrit la manière dont ont été choisies les procédures pour le mesurage des agents chimiques conformes aux exigences spécifiées dans l'EN 482 et dans l'une des normes EN 838, EN 1076, EN 13890, EN 13936 et/ou EN 13205, dans la mesure où elles sont applicables.
Le présent document se rapporte à la sélection d'agents chimiques et de groupes de substances associés et à l'établissement des listes de méthodes correspondantes. Il décrit l'évaluation des procédures de mesure disponibles afin de sélectionner celle qui est la mieux adaptée à un agent chimique particulier.
Le présent document est également destiné à :
   fournir un moyen permettant de comparer, pour un agent chimique donné, une nouvelle procédure de mesure à celles listées dans la base de données GESTIS - Méthodes d'analyse [2] ;
   évaluer et classer, pour un agent chimique donné, une procédure de mesure donnée (provenant d'une source acceptée) ne figurant pas encore dans la base de données GESTIS - Méthodes d'analyse [2].

Izpostavljenost na delovnem mestu - Meritve kemičnih agensov v skladu z zahtevami standarda EN 482 in enega izmed standardov EN 838, EN 1076, EN 13205, EN 13890 in EN 13936 - Izbira postopkov

To tehnično poročilo CEN opisuje merila za izbiro merilnih metod, ki so v skladu z zahtevami standarda EN 482 in enega od standardov EN 838, EN 1076, EN 13205, EN 13890 in EN 13936.

General Information

Status
Published
Publication Date
14-Feb-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Feb-2017
Due Date
19-May-2017
Completion Date
15-Feb-2017

Buy Standard

Technical report
TP CEN/TR 17055:2017
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 17055:2017
01-julij-2017
,]SRVWDYOMHQRVWQDGHORYQHPPHVWX0HULWYHNHPLþQLKDJHQVRYYVNODGX]
]DKWHYDPLVWDQGDUGD(1LQHQHJDL]PHGVWDQGDUGRY(1(1(1
(1LQ(1,]ELUDSRVWRSNRY
Workplace exposure - Measurement of chemical agents complying with the requirements
given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN
13936 - Choice of procedures
Exposition am Arbeitsplatz - Messung von chemischen Arbeitsstoffen, welche die
Anforderungen nach EN 482 sowie nach einer von EN 838, EN 1076, EN 13205, EN
13890 und EN 13936 erfüllen - Auswahl von Verfahren
Exposition sur les lieux de travail - Mesurage des agents chimiques conformément aux
exigences de l'EN 482 et de l'une des normes EN 838, EN 1076, EN 13205, EN 13890
et EN 13936 - Choix des procédures
Ta slovenski standard je istoveten z: CEN/TR 17055:2017
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST-TP CEN/TR 17055:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 17055:2017

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 17055:2017


CEN/TR 17055
TECHNICAL REPORT

RAPPORT TECHNIQUE

February 2017
TECHNISCHER BERICHT
ICS 13.040.30
English Version

Workplace exposure - Measurement of chemical agents
complying with the requirements given in EN 482 and
either one of EN 838, EN 1076, EN 13205, EN 13890 and
EN 13936 - Choice of procedures
Exposition sur les lieux de travail - Mesurage des Exposition am Arbeitsplatz - Messung von chemischen
agents chimiques conformément aux exigences Arbeitsstoffen, welche die Anforderungen nach EN 482
spécifiées dans l'EN 482 et dans l'une des normes EN sowie nach einer von EN 838, EN 1076, EN 13205, EN
838, EN 1076, EN 13205, EN 13890 et EN 13936 - 13890 und EN 13936 erfüllen - Auswahl von Verfahren
Choix des modes opératoires


This Technical Report was approved by CEN on 9 January 2017. It has been drawn up by the Technical Committee CEN/TC 137.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17055:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 17055:2017
CEN/TR 17055:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Measuring procedures . 5
2.1 General . 5
2.2 Selection of chemical agents . 5
3 Method lists . 6
3.1 General . 6
3.2 Origin of the measuring procedure . 6
3.3 Structure of the method lists . 9
4 Evaluation of measuring procedures . 10
4.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.