EN 13763-6:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 6. del: Ugotavljanje odpornosti vodnikov proti razpokanju pri nizkih temperaturahExplosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 6: Bestimmung des Widerstandes der Isolation von Zünderdrähten gegen Rissbildung bei niedrigen TemperaturenExplosifs a usage civil - Détonateurs et relais - Partie 6: Détermination de la résistance a la fissuration des fils d'amorces a basse températureExplosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking in low temperatures of leading wires71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-6:2003SIST EN 13763-6:2004en01-januar-2004SIST EN 13763-6:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-6November 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 6:Determination of resistance to cracking in low temperatures ofleading wiresExplosifs à usage civil - Détonateurs et relais - Partie 6:Détermination de la résistance à la fissuration des filsd'amorces à basse températureExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 6: Bestimmung desWiderstandes der Isolation von Zünderdrähten gegenRissbildung bei niedrigen TemperaturenThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-6:2003 E

Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9
...