EN 12501-1:2003
(Main)Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General
This standard provides a basis for assessing the corrosion likelihood in soil of buried metallic structures. These structures include for example pipelines, metal sheathed cables, storage tanks, sheet pilings, tower support anchors, culverts and earth reinforcement. Metallic materials covered by the standard are steel, cast iron and stainless steel, as well as copper, lead, aluminium, zinc and their alloys. These metallic materials may be uncoated or coated with other metallic materials.
Korrosionsschutz metallischer Werkstoffe - Korrosionswahrscheinlichkeit in Böden - Teil 1: Allgemeines
Diese Norm dient als Basis für die Beurteilung der Korrosions-wahrscheinlich- keit von erdüberdeckten Anlagen in Böden. Diese Anlage schliessen zum Beispielein: Rohrleitungen, metall-ummantelte Kabel, Vorratstanks, Spundwände, Stützpfeilerveranke-rungen, Kabelkanäle und Erdbewehrungen. Diese Norm deckt die metallischen Werkstoffe ab: Stahl, Gusseisen, Nichtrostender Stahl, sowie Kupfer, Blei, Aluminium, Zink und deren Legierungen.
Protection des matériaux métalliques contre la corrosion - Risque de corrosion dans les sols - Partie 1 : Généralités
La présente Norme européenne sert de base à l'évaluation du risque de corrosion dans les sols de structures métalliques enterrées comme les canalisations, les câbles métalliques sous gaines, les réservoirs de stockage, les parois de palplanches, les supports d'ancrage, les conduits souterrains et les renforcements de sol.
Cette partie de la présente Norme européenne définit les concepts généraux d'une méthode d'évaluation et énumère les principaux facteurs qui interviennent dans la corrosion des structures enterrées.
Protikorozijska zaščita kovinskih materialov - Verjetnost nastanka korozije v zemlji - 1. del: Splošno
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Korrosionsschutz metallischer Werkstoffe - Korrosionswahrscheinlichkeit in Böden - Teil 1: AllgemeinesProtection des matériaux métalliques contre la corrosion - Risque de corrosion dans les sols - Partie 1 : GénéralitésProtection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General77.060Korozija kovinCorrosion of metalsICS:Ta slovenski standard je istoveten z:EN 12501-1:2003SIST EN 12501-1:2003en01-december-2003SIST EN 12501-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12501-1April 2003ICS 77.060English versionProtection of metallic materials against corrosion - Corrosionlikelihood in soil - Part 1: GeneralProtection des matériaux métalliques contre la corrosion -Risque de corrosion dans les sols - Partie 1: GénéralitésKorrosionsschutz metallischer Werkstoffe -Korrosionswahrscheinlichkeit in Böden - Teil 1:AllgemeinesThis European Standard was approved by CEN on 21 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12501-1:2003 ESIST EN 12501-1:2003
Procedure for assessing the corrosion load in soil.8A.1Procedure.8A.2Preliminary inquiry.9A.3Site survey.9A.4Soil sampling.9Annex B (informative)
Examples of factors influencing the corrosion of buried structures.10B.1Soil and backfill material.10B.2Structure.10B.3Environment.10Annex C (informative)
Principal function of a buried structure and main type of corrosion to beconsidered.12Bibliography.13SIST EN 12501-1:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.