EN ISO 11782-2:2008/A1:2024

SLOVENSKI STANDARD
SIST EN ISO 11782-2:2008/oprA1:2023
01-november-2023
Korozija kovin in zlitin - Ugotavljanje pokanja zaradi korozijske utrujenosti - 2. del:
Preskus za ugotavljanje napredovanja razpok z vzorci z umetno razpoko -
Dopolnilo A1 (ISO 11782-2:1998/DAM 1:2023)
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation
testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/DAM 1:2023)
Korrosion von Metallen und Legierungen - Prüfung der Schwingungskorrosion - Teil 2:
Rissausbreitungsprüfung an angerissenen Proben - Änderung 1 (ISO 11782-
2:1998/DAM 1:2023)
Corrosion des métaux et alliages - Essais de fatigue-corrosion - Partie 2: Essais
d'amorce de rupture sur des éprouvettes préfissurées - Amendement 1 (ISO 11782-
2:1998/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 11782-2:2008/prA1
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 11782-2:2008/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11782-2:2008/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 11782-2:2008/oprA1:2023
DRAFT AMENDMENT
ISO 11782-2:1998/DAM 1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
2023-08-18 2023-11-10
Corrosion of metals and alloys — Corrosion fatigue
testing —
Part 2:
Crack propagation testing using precracked specimens
AMENDMENT 1
Corrosion des métaux et alliages — Essais de fatigue-corrosion —
Partie 2: Essais d'amorce de rupture sur des éprouvettes préfissurées
AMENDEMENT 1
ICS: 77.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11782-2:1998/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 11782-2:2008/oprA1:2023
ISO 11782-2:1998/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 11782-2:1998/DAM 1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:

Corrosion of metals and alloys — Corrosion fatigue
testing —
Part 2:
Crack propagation testing using precracked specimens
AMENDMENT 1
Corrosion des métaux et alliages — Essais de fatigue-corrosion —
Partie 2: Essais d'amorce de rupture sur des éprouvettes préfissurées
AMENDEMENT 1
ICS: 77.060
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 11782-2:1998/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
SIST EN ISO 11782-2:2008/oprA1:2023
ISO 11782-2:1998/DAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has be
...