EN 17887-1:2024
(Main)Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
This document specifies a test method for the in situ measurement of the thermal performance of buildings, both newly built and existing.
This document specifies the data to be collected during and after the test.
NOTE The analysis of the data and the reporting format for the analysis are referred to in prEN 17887-2:2022 Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test.
This document is applicable to domestic scale detached buildings and attached domestic scale buildings, such as semi-detached houses, terraced houses and apartments.
Wärmetechnisches Verhalten von Gebäuden – In-situ-Prüfung an fertiggestellten Gebäuden – Teil 1: Datenerhebung für den Gesamtwärmeverlusttest; Deutsche Fassung EN 17887-1:2024
Dieses Dokument legt ein Prüfverfahren für die In-situ-Messung des wärmetechnischen Verhaltens sowohl von neuen als auch von bestehenden Gebäuden fest.
Dieses Dokument legt die während und nach der Prüfung zu erfassenden Daten fest.
ANMERKUNG Die Auswertung der Daten und deren Berichtsformat werden in FprEN 17887 2:2022, Wärmetechnisches Verhalten von Gebäuden — In-situ-Prüfung an fertiggestellten Gebäuden — Teil 2: Auswertung stationärer Daten für die Prüfung des Gesamtwärmeverlustes, behandelt.
Dieses Dokument ist anwendbar für freistehende Wohngebäude und angeschlossene Wohngebäude wie Doppelhaushälften, Reihenhäuser und Wohnungen. Speziell konstruierte Prüflinge, die einzelne Bauteile darstellen, fallen nicht in den Anwendungsbereich dieses Dokuments.
Performance thermique des bâtiments - Essais in situ des bâtiments achevés - Partie 1 : Collecte de données pour l’essai de déperdition thermique globale
Le présent document spécifie une méthode d’essai pour mesurer in situ la performance thermique des bâtiments récemment construits et des bâtiments existants.
Il spécifie les données à collecter pendant et après l’essai.
NOTE L’analyse des données et le format de rapport pour l’analyse sont référencés dans le prEN 17887 2:2022 Performance thermique des bâtiments — Essais in situ des bâtiments achevés — Partie 2 : Analyse des données en régime stationnaire pour l’essai de déperdition thermique globale.
Le présent document s’applique aux bâtiments individuels et contigus destinés à une utilisation domestique, tels que les maisons jumelées, les maisons mitoyennes et les appartements.
Toplotne značilnosti stavb - Preskušanje dokončanih stavb na mestu vgradnje - 1. del: Zbiranje podatkov za preskus skupnih toplotnih izgub
Ta dokument določa preskusno metodo za merjenje toplotnih značilnosti na novo zgrajenih in obstoječih stavb na mestu vgradnje.
Določa podatke, ki jih je treba zbrati med preskusom in po njem.
OPOMBA: Analiza podatkov in oblika poročanja za analizo sta navedeni v standardu prEN 17887-2:2022 Toplotne značilnosti stavb – Preskušanje dokončanih stavb na mestu vgradnje – 2. del: Analiza podatkov v stanju dinamičnega ravnovesja za preskus skupnih toplotnih izgub.
Ta dokument se uporablja za samostojne in povezane stanovanjske stavbe, kot so dvojčki, vrstne hiše ali stanovanja.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Toplotne značilnosti stavb - Preskušanje dokončanih stavb na mestu vgradnje - 1.
del: Zbiranje podatkov za preskus skupnih toplotnih izgub
Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data
collection for aggregate heat loss test
Thermische Leistung von Gebäuden - In-situ-Tests von fertiggestellten Gebäuden - Teil
1: Datenerfassung für den Gesamtwärmeverlusttest
Performance thermique des bâtiments - Essais in situ des bâtiments achevés - Partie 1 :
Collecte de données pour l’essai de déperdition thermique globale
Ta slovenski standard je istoveten z: EN 17887-1:2024
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17887-1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 91.120.10
English Version
Thermal performance of buildings - In situ testing of
completed buildings - Part 1: Data collection for aggregate
heat loss test
Performance thermique des bâtiments - Essais in situ Thermisches Verhalten von Gebäuden - In-situ-Prüfung
des bâtiments achevés - Partie 1 : Collecte de données fertiggestellter Gebäude - Teil 1: Datenerhebung für
pour l'essai de déperdition thermique globale den Gesamtwärmeverlusttest
This European Standard was approved by CEN on 27 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17887-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and units . 7
3.1 Terms and definitions . 7
3.2 Symbols and units . 9
4 Principle . 9
5 Requirements for test conditions and internal building conditions. 10
5.1 Test conditions . 10
5.2 Internal building conditions . 11
6 Apparatus . 11
6.1 Internal apparatus. 11
6.1.1 Temperature sensors . 11
6.1.2 Relative humidity sensors . 11
6.1.3 Electric resistance fan heaters . 12
6.1.4 Electric circulation fans . 12
6.1.5 Temperature controllers . 12
6.1.6 Energy meters . 12
6.1.7 Datalogger(s) . 12
6.1.8 Extension leads . 12
6.2 External apparatus . 12
6.2.1 Weather station including pyranometer . 12
6.2.2 Datalogger . 13
6.3 Sampling intervals . 13
7 Uncertainty of measurement and calibration procedures . 13
7.1 General. 13
7.2 Calibration and maximum permissible error of sensors . 13
7.2.1 General. 13
7.2.2 Temperature sensors . 13
7.2.3 Energy meters . 13
7.2.4 Relative humidity (RH) sensors. 13
7.2.5 Weather station . 13
7.2.6 Pyranometer . 14
7.2.7 PID controller . 14
8 Preparation of the test building and installation and location of apparatus . 14
8.1 General. 14
8.2 Location and numbers of apparatus . 14
8.2.1 General. 14
8.2.2 Internal air temperature and relative humidity sensors . 15
8.2.3 Electric resistance fan heaters . 15
8.2.4 Electric air circulation fans . 15
8.2.5 PID temperature controller . 16
8.2.6 Energy meters . 16
8.2.7 Data logger . 16
8.2.8 Weather station and pyranometer . 16
8.3 Minimizing other heat gain and heat loss mechanisms during the test . 16
8.4 Establishing and maintaining stable mean internal temperature conditions . 16
9 Optional measurements . 17
10 Test procedure . 17
10.1 Pre-test pressurization test . 17
10.2 Heating . 17
10.3 Test duration . 18
10.4 Post-test pressurization test . 18
11 Data collection . 18
11.1 Recording data . 18
11.2 Downloading data. 18
11.3 Data verification. 19
11.4 Downloading data. 19
12 Test report . 19
12.1 General . 19
12.2 Data . 19
12.2.1 Data on the measured building/ structure . 19
12.2.2 Description of the experimental set-up . 20
12.2.3 Conditions during measurement . 20
Annex A (informative) Additional information for buildings with special considerations . 21
A.1 Attached and multi-occupancy buildings. 21
A.2 Buildings in lower European latitudes . 21
A.3 Buildings with low or high thermal mass . 21
A.4 Very large or poorly insulated buildings . 22
A.5 Buildings with a large proportion of south-facing glazing area . 22
A.6 Buildings with a low level of air permeability/air leakage rate . 22
A.7 Tests undertaken outside the idealised test period . 22
Annex B (informative) Test set up . 24
Bibliography . 26
European foreword
This document (EN 17887-1:2024) has been prepared by Technical Committee CEN/TC 89 Thermal
performance of buildings and building components, the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards shall
be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.