Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5: Vortex shaker method

This document describes the methodology for measuring and characterizing the dustiness of bulk materials that contain or release respirable NOAA or other respirable particles, under standard and reproducible conditions and specifies for that purpose the vortex shaker method.
This document specifies the selection of instruments and devices and the procedures for calculating and presenting the results. It also gives guidelines on the evaluation and reporting of the data.
The methodology described in this document enables
a)   the measurement of the respirable dustiness mass fraction,
b)   the measurement of the number-based dustiness index of respirable particles in the particle size range from about 10 nm to about 1 µm,
c)   the measurement of the number-based emission rate of respirable particles in the particle size range from about 10 nm to about 1 µm,
d)   the measurement of the number-based particle size distribution of the released respirable aerosol in the particle size range from about 10 nm to 10 µm,
e)   the collection of released airborne particles in the respirable fraction for subsequent observations and analysis by electron microscopy.
This document is applicable to the testing of a wide range of bulk materials including nanomaterials in powder form.
NOTE 1    With slightly different configurations of the method specified in this document, dustiness of a series of carbon nanotubes has been investigated ([5] to [10]). On the basis of this published work, it can be assumed that the vortex shaker method is also applicable to nanofibres and nanoplates.
This document is not applicable to millimetre-sized granules or pellets containing nano-objects in either unbound, bound uncoated and coated forms.
NOTE 2   The restrictions with regard to the application of the vortex shaker method on different kinds of nanomaterials result from the configuration of the vortex shaker apparatus as well as from the small size of the test sample required. Eventually, if future work will be able to provide accurate and repeatable data demonstrating that an extension of the method applicability is possible, the intention is to revise this document and to introduce further cases of method application.
NOTE 3   As observed in the pre-normative research project [4], the vortex shaker method specified in this document provides a more energetic aerosolization than the rotating drum, the continuous drop and the small rotating drum methods specified in FprEN 17199 2 [1], FprEN 17199 3 [2] and FprEN 17199 4 [3], respectively. The vortex shaker method can better simulate high energy dust dispersion operations or processes where vibration or shaking is applied or even describe a worst case scenario in a workplace, including the (non-recommended) practice of cleaning contaminated worker coveralls and dry work surfaces with compressed air.
NOTE 4   Currently no classification scheme in terms of dustiness indices or emission rates has been established according to the vortex shaker method. Eventually, when a large number of measurement data has been obtained, the intention is to revise the document and to introduce such a classification scheme, if applicable.

Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern, die alveolengängige NOAA oder andere alveolengängige Partikel enthalten oder freisetzen - Teil 5: Verfahren mit Vortex-Schüttler

Diese Europäische Norm enthält die Methodik für die Messung und Charakterisierung des Staubungs-verhaltens von Schüttgütern, die Nanoobjekte oder Partikel im Submikrometerbereich enthalten oder unter wiederholbaren und Standardbedingungen freisetzen, und legt zu diesem Zweck das Verfahren mit Vortex-Schüttler fest.
Darüber hinaus legt diese Europäische Norm die Auswahl der Instrumente und Vorrichtungen sowie die Verfahren für die Berechnung und Präsentation der Ergebnisse fest. Des Weiteren enthält die Norm eine Anleitung für die Auswertung und Angabe der Daten.
Die in dieser Europäischen Norm festgelegte Methodik ermöglicht
a)   die Berechnung des Massenanteils an alveolengängigem Staub;
b)   die Bestimmung des massenbasierten Staubindex alveolengängiger Partikel im Größenbereich zwischen ungefähr 10 nm und 1 000 nm;
c)   die Bestimmung des zahlenbasierten Staubindex alveolengängiger Partikel im Größenbereich zwischen ungefähr 10 nm und 1 000 nm;
d)   die Bestimmung der zahlenbasierten Emissionsrate alveolengängiger Partikel im Größenbereich zwischen ungefähr 10 nm und 1 000 nm;
e)   die Bestimmung der zahlenbasierten Größenverteilung des freigesetzten einatembaren Aerosols im Größenbereich zwischen ungefähr 10 nm und 10 µm;
f)   die Sammlung freigesetzter Schwebstoffe in der alveolengängigen Fraktion für anschließende Beobachtungen und Analysen durch Elektronenmikroskopie.
Diese Europäische Norm ist für die Prüfung einer Vielzahl verschiedener Schüttgüter einschließlich Nanomaterialien in Pulverform anwendbar.
ANMERKUNG 1   Das Staubungsverhalten einer Reihe Carbon-Nanoröhrchen wurde mit einer von dem in dieser Europäischen Norm festgelegten Verfahren leicht abweichenden Konfiguration untersucht ([5] bis [10]). Auf der Grundlage dieser veröffentlichten Arbeiten kann angenommen werden, dass das Verfahren mit Vortex-Schüttler auch für Nanofasern und Nanoplättchen anwendbar ist.
Diese Europäische Norm ist nicht für Granulate und Pellets im Millimeter-Größenbereich anwendbar, die Nanoobjekte in ungebundener, gebundener, unbeschichteter oder beschichteter Form enthalten.
ANMERKUNG 2   Dies liegt an der Konfiguration des Vortex-Schüttlers und der geringen erforderlichen Prüfprobe. Sofern zukünftige Arbeiten korrekte und wiederholbare Daten liefern, die nachweisen, dass dies möglich ist, ist beabsichtigt, die Europäische Norm zu revidieren und diese Anwendung einzuführen.
ANMERKUNG 3   Das vornormative Forschungsprojekt [4] hat gezeigt, dass das in dieser Europäischen Norm festgelegte Verfahren mit Vortex-Schüttler eine energetischere Zerstäubung ermöglicht als das Verfahren mit rotierender Trommel, kontinuierlichem Fall und kleiner rotierender Trommel respektive nach prEN 17199 2:2017 [1], prEN 17199 3:2017 [2] und prEN 17199 4:2017 [3]. Das Verfahren kann Arbeiten oder Prozesse mit hochenergetischer Staubdispersion durch Vibration besser simulieren oder sogar ein Worst-Case-Szenario am Arbeitsplatz einschließlich der (nicht empfohlenen) Praxis der Reinigung kontaminierter Arbeitsoveralls und trockener Arbeitsoberflächen mit Druckluft beschreiben.
ANMERKUNG 4   Bisher wurde noch kein Klassifizierungsschema im Hinblick auf Staubungsindizes oder Emissions-raten nach dem Verfahren mit Vortex-Schüttler erstellt. Schließlich, wenn eine große Anzahl an Messdaten vorliegt, ist beabsichtigt, diese Europäische Norm zu revidieren und ein solches Klassifizierungsschema einzuführen.

Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux en vrac contenant ou émettant des nano-objets et leurs agrégats et agglomérats (NOAA) ou autres particules en fraction alvéolaire - Partie 5: Méthode impliquant l'utilisation d'un agitateur vortex

Le présent document décrit la méthodologie permettant de mesurer et de caractériser le pouvoir de resuspension de matériaux en vrac contenant ou émettant des NOAA ou autres particules en fraction alvéolaire dans des conditions normalisées et reproductibles et spécifie, à cette fin, le but de la méthode de l’agitateur vortex.
Le présent document spécifie le choix des instruments et dispositifs ainsi que les procédures de calcul et d’expression des résultats. Il fournit également des lignes directrices concernant l’évaluation et la consignation des données.
La méthodologie décrite dans le présent document permet :
a)   le mesurage de la fraction massique des poussières alvéolaires ;
b)   le mesurage de l’indice du pouvoir de resuspension en nombre de particules alvéolaires dans la plage granulométrique comprise entre environ 10 nm et 1 µm ;

Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov, ki vsebujejo ali sproščajo respirabilne nanopredmete ter njihove agregate in aglomerate (NOAA) in druge respirabilne delce - 5. del: Metoda s krožnim mešalnikom

Ta evropski standard določa metodologijo za merjenje in opredelitev prašnosti razsutih materialov, ki vsebujejo ali sproščajo nanopredmete ali submikrometrske delce v standardnih in ponovljivih pogojih, ter za ta namen določa metodo s krožnim mešalnikom.
Poleg tega navaja ta evropski standard tudi izbiro instrumentov in naprav ter postopke za izračun in predstavitev rezultatov. Podaja tudi smernice za vrednotenje in poročanje podatkov.
Metodologija, ki je opisana v tem evropskem standardu, omogoča:
a)   merjenje masnega deleža pri respirabilni prašnosti,
b)   določanje indeksa prašnosti na podlagi mase respirabilnih delcev v razponu velikosti od približno 10 nm to 1000 nm;
c)   določanje indeksa prašnosti respirabilnih delcev na podlagi števila v razponu velikosti od približno 10 nm to 1000 nm;
d)   določanje stopnje emisij respirabilnih delcev na podlagi števila v razponu velikosti od približno 10 nm to 1000 nm;
e)   določanje števila porazdelitev velikosti sproščenega respirabilnega aerosola v razponu velikosti od približno 10 nm to 10 µm;
f)   zbiranje sproščenih lebdečih delcev v respirabilnih deležih za nadaljnje opazovanje in analizo z elektronsko mikroskopijo.
Ta evropski standard se uporablja za preskušanje širokega nabora razsutih materialov, vključno z nanomateriali v prahu.
OPOMBA 1:    Prašnost niza ogljikovih nanocevk je bila preiskana (od [5] do [10]) z nekoliko drugačnimi konfiguracijami metode, ki je navedena v tem evropskem standardu. Na podlagi tega objavljenega dela je mogoče sklepati, da se lahko metoda s krožnim mešalnikom uporablja tudi za nanovlakna in nanoplošče.
Ta evropski standard se ne uporablja za milimetrske granule ali pelete, ki vsebujejo nanopredmete v nevezani, vezani, prevlečeni ali neprevlečeni obliki.
OPOMBA 2:   To izhaja iz konfiguracije naprave s krožnim mešalnikom in potreben je majhen preskusni vzorec. Če bo delo v prihodnje prineslo točne in ponovljive podatke, ki bi pokazali, da je to mogoče, bo predvidena revizija evropskega standarda in uvedba te uporabe.
OPOMBA 3:   Kot je bilo ugotovljeno v prednormativnem raziskovalnem projektu [4], omogoča metoda s krožnim mešalnikom, ki je navedena v tem evropskem standardu, bolj energetsko aerosolizacijo v primerjavi z vrtečim bobnom, trajnim padanjem in majhnim vrtečim bobnom, ki so navedeni v standardih prEN 17199-2:2018 [1], prEN 17199-3:2018 [2] oziroma prEN 17199-4:2018 [3]. Omogoča boljšo simulacijo visokoenergijskih postopkov in procesov razprševanja prahu, pri katerih se uporablja vibracija, ali celo opis najslabšega možnega scenarija na delovnem mestu, vključno s prakso čiščenja kontaminiranih delavskih kombinezonov in suhih delovnih površin s stisnjenim zrakom (se ne priporoča).
OPOMBA 4:   Za indekse prašnosti ali stopnje emisij trenutno še ni vzpostavljena nobena klasifikacijska shema v skladu z metodo s krožnim mešalnikom. Ko bo sčasoma pridobljenih veliko merilnih podatkov, je predvidena revizija evropskega standarda in uvedba take klasifikacijske sheme, če bo to ustrezno.

General Information

Status
Published
Publication Date
26-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Mar-2019
Due Date
23-Dec-2018
Completion Date
27-Mar-2019

Buy Standard

Standard
EN 17199-5:2019 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17199-5:2018
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17199-5:2019
01-september-2019
Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov, ki
vsebujejo ali sproščajo respirabilne nanopredmete ter njihove agregate in
aglomerate (NOAA) in druge respirabilne delce - 5. del: Metoda s krožnim
mešalnikom
Workplace exposure - Measurement of dustiness of bulk materials that contain or
release respirable NOAA or other respirable particles - Part 5: Vortex shaker method
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern, die
Nanoobjekte oder Submikrometerpartikel enthalten oder freisetzen - Teil 5: Verfahren
mit Vortex-Schüttler
Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux
en vrac contenant ou émettant des nano-objets et leurs agrégats et agglomérats (NOAA)
ou autres particules en fraction alvéolaire - Partie 5: Méthode impliquant l'utilisation d'un
agitateur vortex
Ta slovenski standard je istoveten z: EN 17199-5:2019
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST EN 17199-5:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 17199-5:2019

---------------------- Page: 2 ----------------------

SIST EN 17199-5:2019


EN 17199-5
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 13.040.30
English Version

Workplace exposure - Measurement of dustiness of bulk
materials that contain or release respirable NOAA or other
respirable particles - Part 5: Vortex shaker method
Exposition sur les lieux de travail - Mesurage du Exposition am Arbeitsplatz - Messung des
pouvoir de resuspension des matériaux en vrac Staubungsverhaltens von Schüttgütern, die
contenant ou émettant des nano-objets et leurs Nanoobjekte oder Submikrometerpartikel enthalten
agrégats et agglomérats (NOAA) ou autres particules oder freisetzen - Teil 5: Verfahren mit Vortex-Schüttler
en fraction alvéolaire - Partie 5: Méthode impliquant
l'utilisation d'un agitateur vortex
This European Standard was approved by CEN on 8 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17199-5:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 17199-5:2019
EN 17199-5:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 8
5 Principle . 8
6 Equipment .
...

SLOVENSKI STANDARD
oSIST prEN 17199-5:2018
01-februar-2018
[Not translated]
Workplace exposure - Measurement of dustiness of bulk materials that contain or
release nano-objects or submicrometer particles - Part 5: Vortex shaker method
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern, die
Nanoobjekte oder Submikrometerpartikel enthalten oder freisetzen - Teil 5: Verfahren mit
Vortex-Schüttler
Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux
en vrac contenant des nano-objets et leurs agrégats et agglomérats - Partie 5: Méthode
impliquant l'utilisation d'un agitateur vortex
Ta slovenski standard je istoveten z: prEN 17199-5
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
oSIST prEN 17199-5:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17199-5:2018

---------------------- Page: 2 ----------------------
oSIST prEN 17199-5:2018


DRAFT
EUROPEAN STANDARD
prEN 17199-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2017
ICS 13.040.30
English Version

Workplace exposure - Measurement of dustiness of bulk
materials that contain or release nano-objects or
submicrometer particles - Part 5: Vortex shaker method
Exposition sur les lieux de travail - Mesurage du Exposition am Arbeitsplatz - Messung des
pouvoir de resuspension des matériaux en vrac Staubungsverhaltens von Schüttgütern, die
contenant des nano-objets et leurs agrégats et Nanoobjekte oder Submikrometerpartikel enthalten
agglomérats - Partie 5: Méthode impliquant oder freisetzen - Teil 5: Verfahren mit Vortex-Schüttler
l'utilisation d'un agitateur vortex
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 137.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17199-5:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17199-5:2018
prEN 17199-5:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Principle . 7
6 Equipment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.