EN 13164:2008
(Main)Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue and grooves, shiplap, etc.).
This European Standard specifies product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this European Standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This European Standard also covers multilayered insulation boards.
This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non conflicting standards.
Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this European Standard.
This European Standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations or products intended for acoustic insulation.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation
Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte extrudierte Polystyrolschaumprodukte
mit oder ohne Kaschierung fest, die als Wärmedämmstoffe im Bauwesen verwendet werden.
Die Produkte werden in Form von Platten hergestellt. Sie sind ebenso mit besonderer Kanten- oder
Oberflächenausbildung verfügbar (Nut und Federausbildung, Stufenfalz usw.).
Diese Europäische Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen
für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
In dieser Europäischen Norm beschriebene Produkte werden auch in vorgefertigten Wärmedämmsystemen
und Mehrschicht-Verbundplatten angewendet; die Eigenschaften von Systemen, in die diese Produkte
integriert sind, werden nicht behandelt. Diese Norm gilt auch für Produkte, die mehrlagig hergestellt werden.
Diese Europäische Norm legt keine Anforderungsniveaus für eine vorgegebene Eigenschaft fest, die ein
Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte
Anwendungen benötigte Anforderungen können Regelwerken oder übereinstimmenden Normen entnommen
werden.
Diese Europäische Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger
ist als 0,25 m2 ⋅ K/W oder deren Nennwert der Wärmeleitfähigkeit größer ist als 0,060 W/(m ⋅ K) bei 10 °C
Mitteltemperatur.
Diese Europäische Norm gilt nicht für in-situ-Dämmstoffe und für Produkte, die zur Dämmung von
haustechnischen oder betriebstechnischen Anlagen bestimmt sind, und Produkte, die zur Schalldämmung
bestimmt sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés
en mousse de polystyrène extrudé, avec ou sans parements ou revêtements, utilisés pour l'isolation
thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux qui sont également
disponibles avec traitement spécial de leurs chants et surfaces (tenon et mortaise, feuillure, etc.).
La présente norme européenne spécifie les caractéristiques du produit et contient les procédures d'essai,
d’évaluation de la conformité, de marquage et d'étiquetage.
Les produits du domaine d’application de la présente norme européenne sont également utilisés dans des
systèmes d’isolation thermique et dans des panneaux composites préfabriqués ; la performance des
systèmes dans lesquels entrent ces produits n’est pas définie. La norme porte également sur les panneaux
multicouches d'isolation.
La présente norme européenne ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre
un produit pour démontrer son aptitude à l’emploi dans une application particulière. Les niveaux requis pour
une application donnée figurent dans les réglementations, ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,25 m2.K/W
ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,060 W/(m.K) ne
sont pas du domaine d'application de la présente norme européenne.
Les produits d’isolation mis en oeuvre in situ, ceux destinés à être utilisés pour l'isolation des équipements du
bâtiment et des installations industrielles ou ceux destinés à l’isolation acoustique ne sont pas du domaine
d'application de la présente norme européenne.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrène extrudé (XPS) - SpécificationThermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13164:2008SIST EN 13164:2009en,fr,de01-februar-2009SIST EN 13164:2009SLOVENSKI
STANDARDSIST EN 13164:2002/AC:2006SIST EN 13164:2002/A1:2004SIST EN 13164:20021DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13164November 2008ICS 91.100.60Supersedes EN 13164:2001
English VersionThermal insulation products for buildings - Factory madeproducts of extruded polystyrene foam (XPS) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en mousse de polystyrène extrudé (XPS) -SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus extrudiertem Polystyrolschaum (XPS) -SpezifikationThis European Standard was approved by CEN on 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13164:2008: ESIST EN 13164:2009
Determination of the declared values of thermal resistance and thermal conductivity . 21 A.1 General . 21 A.2 Input data . 21 A.3 Declared values. 21 Annex B (normative)
Factory Production Control . 23 Annex C (normative)
Determination of the aged values of thermal resistance and thermal conductivity . 26 C.1 Scope . 26 C.2 Procedure for XPS foam without diffusion tight laminates . 26 C.3 Procedure for XPS foam for use with diffusion tight facings on both sides . 27 C.4 Calculation of aged value . 28 C.5 Blowing agent . 29 C.6 Product grouping . 29 Annex D (informative)
Additional Properties . 30 D.1 General . 30 D.2 Behaviour under cyclic loading . 30 D.3 Compressive modulus of elasticity . 30 D.4 Bending strength . 30 D.5 Shear strength . 30 D.6 Determination of volume percentage of closed cells . 31 Annex E (informative)
Plan for cutting test specimen . 32 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 34 ZA.1 Scope and relevant characteristics . 34 ZA.2 Procedures for attestation of conformity of extruded polystyrene foam products . 36 ZA.3 CE Marking and labelling . 40 SIST EN 13164:2009
Tables Table 1 — Tolerances of length, width, squareness and flatness . 11 Table 2 — Classes for thickness tolerances . 12 Table 3 — Levels for compressive stress or compressive strength. 13 Table 4 — Levels for deformation under specified compressive load and temperature conditions . 14 Table 5 — Levels for tensile strength, perpendicular to faces . 15 Table 6 — Levels for long term water absorption by total immersion . 16 Table 7 — Levels for long term water absorption by diffusion . 16 Table 8 — Levels for freeze thaw resistance . 16 Table 9 — Test methods, test specimens and conditions . 18 Table A.1 — Values of k for one sided 90 % tolerance interval with a confidence level of 90 % . 22 Table B.1 — Minimum product testing frequencies. 23 Table B.2 — Minimum product testing frequencies for the reaction to fire characteristics . 24 Table D.1 — Test methods, test specimens, conditions and minimum testing frequencies . 31 Table ZA.1 — Relevant clauses for Extruded polystyrene foam and intended use . 35 Table ZA.2 — Systems of attestation of conformity . 36 Table ZA.3 — Assignment of evaluation of conformity tasks for products under system 1 . 37 Table ZA.4 — Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire . 38
This document is one of a series of standards for insulating products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products; all of which come within the scope of CEN/TC88: EN 13162, Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification EN 13163, Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification EN 13164, Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification EN 13165, Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification EN 13166, Thermal insulation products for buildings — Factory made products of phenolic foam (PF) — Specification EN 13167, Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification EN 13168, Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification EN 13169, Thermal insulation products for buildings — Factory made products of expanded perlite (EPB) — Specification EN 13170, Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification SIST EN 13164:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.