EN 10275:1999
(Main)Metallic materials - Tube ring hydraulic pressure test
Metallic materials - Tube ring hydraulic pressure test
This European Standard specifies the ring hydraulic pressure test for metallic tubes. It is generally applied to tubes with an outside diameter generally greater than 120 mm and outside diameter to thickness ratio not less than 20. The objective of this test is to ascertain the value of the hoop stress required to produce a specified total circumferential (hoop) strain.
Metallische Werkstoffe - Hydraulischer Ringaufweitversuch
In dieser Europäischen Norm ist der hydraulische Ringaufweitversuch fu(r Rohre aus metallischen Werkstoffen mit einem Rohraußendurchmesser im Regelfall gro(ßer 120 mm und einem Verha(ltnis von Außendurchmesser zu Wanddicke von mindestens 20 festgelegt. Diese Pru(fung dient zur Bestimmung der Umfangsspannung, die erforderlich ist, um eine bestimmte Umfangsgesamtdehnung eines Ringes hervorzurufen.
Matériaux métalliques - Essai d'expansion hydraulique sur anneau tubulaire
La présente norme européenne prescrit l'essai d'expansion hydraulique sur anneau destiné aux tubes métalliques. Il s'applique généralement aux tubes dont le diamètre extérieur est généralement supérieur ` 120mm et dont le rapport diamètre extérieur/épaisseur est supérieur ou égal ` 20. L'objectif de cet essai est de déterminer la valeur de la contrainte circonférentielle requise pour produire une déformation circonférentielle totale spécifiée.
Kovinski materiali - Hidravlični tlačni preskus širjenja cevi
General Information
- Status
- Withdrawn
- Publication Date
- 18-May-1999
- Withdrawal Date
- 04-Nov-2025
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 9 - Mechanical testing of tubes
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 03-Dec-2020
- Completion Date
- 05-Nov-2025
Relations
- Replaced By
EN ISO 15363:2025 - Metallic materials - Tube ring hydraulic pressure test (ISO 15363:2017) - Effective Date
- 05-Nov-2025
Frequently Asked Questions
EN 10275:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Metallic materials - Tube ring hydraulic pressure test". This standard covers: This European Standard specifies the ring hydraulic pressure test for metallic tubes. It is generally applied to tubes with an outside diameter generally greater than 120 mm and outside diameter to thickness ratio not less than 20. The objective of this test is to ascertain the value of the hoop stress required to produce a specified total circumferential (hoop) strain.
This European Standard specifies the ring hydraulic pressure test for metallic tubes. It is generally applied to tubes with an outside diameter generally greater than 120 mm and outside diameter to thickness ratio not less than 20. The objective of this test is to ascertain the value of the hoop stress required to produce a specified total circumferential (hoop) strain.
EN 10275:1999 is classified under the following ICS (International Classification for Standards) categories: 77.040.10 - Mechanical testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10275:1999 has the following relationships with other standards: It is inter standard links to EN ISO 15363:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10275:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 10275:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metallische Werkstoffe - Hydraulischer RingaufweitversuchMatériaux métalliques - Essai d'expansion hydraulique sur anneau tubulaireMetallic materials - Tube ring hydraulic pressure test77.040.10Mehansko preskušanje kovinMechanical testing of metalsICS:Ta slovenski standard je istovete
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...