Electronic fee collection - Information exchange between service provision and toll charging (ISO 12855:2022)

This document specifies:
—    the interfaces between electronic fee collection (EFC) back-office systems for vehicle-related transport services, e.g. road user charging, parking and access control;
—    an exchange of information between the back end system of the two roles of service provision and toll charging, e.g.:
—    charging-related data (toll declarations, billing details),
—    administrative data, and
—    confirmation data;
—    transfer mechanisms and supporting functions;
—    information objects, data syntax and semantics.
This document is applicable for any vehicle-related toll service and any technology used for charging.
The data types and associated coding related to the data elements described in Clause 6 are defined in Annex A, using the abstract syntax notation one (ASN.1) according to ISO/IEC 8824‑1.
This document specifies basic protocol mechanisms over which implementations can specify and perform complex transfers (transactions).
This document does not specify, amongst others:
—    any communication between toll charger (TC) or toll service provider (TSP) with any other involved party;
—    any communication between elements of the TC and the TSP that is not part of the back-office communication;
—    interfaces for EFC systems for public transport;
—    any complex transfers (transactions), i.e. sequences of inter-related application data units (ADUs) that can possibly involve several application protocol data unit (APDU) exchanges;
—    processes regarding payments and exchanges of fiscal, commercial or legal accounting documents; and
—    definitions of service communication channels, protocols and service primitives to transfer the APDUs.

Elektronische Gebührenerhebung - Informationsaustausch zwischen Dienstleistern und Gebühreneinzugsunternehmen (ISO 12855:2022)

Perception du télépéage - Échange d'informations entre la prestation de service et la perception du péage (ISO 12855:2022)

Le présent document spécifie:
—    les interfaces entre les systèmes de back-office de perception de télépéage (EFC) pour les services de transport associés aux véhicules, tels que la tarification des usagers de la route, le stationnement et le contrôle d’accès;
—    l’échange d’informations entre les systèmes centraux des deux rôles de prestataire de services et d’exploitant de péage, par exemple:
—    données liées à la perception (déclarations de péage, détails de facturation);
—    données administratives; et
—    données de confirmation;
—    les mécanismes de transfert et fonctions de support;
—    les objets d’informations, syntaxe et sémantique des données.
Le présent document est applicable à tout service lié à des véhicules et à toute technologie utilisée pour la perception.
Les types de données et le codage associé aux éléments de données décrits à l’Article 6 sont définis en Annexe A, à l’aide de la notation de syntaxe abstraite numéro un (ASN.1) conformément à l’ISO/IEC 8824‑1.
Le présent document spécifie les mécanismes de protocole de base sur lesquels des réalisations peuvent spécifier et exécuter des transferts (transactions) complexes.
Le document ne spécifie pas, entre autres:
—    toute communication entre l’exploitant de péage, ou le fournisseur de service de péage, et toute autre partie prenante;
—    toute communication entre éléments de l’exploitant de péage et du fournisseur de service de péage ne faisant pas partie de la communication de back-office;
—    les interfaces pour systèmes de télépéage destinés aux transports publics;
—    tous transferts complexes (transactions), c’est-à-dire des séquences d’unités de données d’application (ADU) pouvant éventuellement mettre en jeu plusieurs échanges d’unités de données de protocole d’application (APDU);
—    les processus concernant les paiements et les échanges de documents comptables fiscaux, commerciaux ou juridiques; ni
—    la définition des canaux de communication de services, des protocoles et des primitives de service permettant de transférer les APDU.

Elektronsko pobiranje pristojbin - Izmenjava informacij med ponudnikom in operaterjem cestninjenja (ISO 12855:2022)

Ta dokument določa:
– vmesnike med sistemi za elektronsko pobiranje pristojbin (EFC) zalednih pisarn za prevozne storitve z vozili (npr. zaračunavanje uporabnine cest, parkirnine in nadzor dostopa);
– izmenjavo informacij med zaledno opremo z dvema vlogama zagotavljanja storitev in zaračunavanja cestnine, kot so na primer:
– podatki v zvezi z zaračunavanjem (prijava cestnine, podrobnosti obračunavanja);
– upravni podatki; in
– podatki o potrditvi;
– prenosni mehanizmi in podporne funkcije;
– informacijski objekti, skladnja in semantika podatkov.
Ta dokument se uporablja za vse storitve cestninjenja v povezavi z vozili in tehnologije, ki se uporabljajo za zaračunavanje.
Podatkovne vrste in povezano kodiranje podatkovnih elementov, opisanih v točki 6, so opredeljeni v dodatku A na podlagi zapisa abstraktne skladnje št. ena (ASN.1) v skladu s standardom ISO/IEC 8824-1.
Ta dokument določa osnovne mehanizme protokola, prek katerih lahko izvedbe določajo in izvajajo kompleksne prenose (transakcije).
Ta dokument med drugim ne določa:
– nobene komunikacije med pobiralcem cestnine (TC) ali izvajalcem storitve pobiranja cestnine (TSP) in katero koli drugo udeleženo stranko;
– nobene komunikacije med elementi pobiralca cestnine in izvajalca storitve pobiranja cestnine, ki ni del komunikacije z zaledno pisarno;
– vmesnikov za sisteme za elektronsko pobiranje cestnin za javni prevoz;
– nobenih kompleksnih prenosov (transakcij), tj. zaporedij medsebojno povezanih aplikacijskih podatkovnih enot (ADU), ki lahko vključujejo več izmenjav podatkovnih enot aplikacijskega protokola (APDU);
– postopkov v zvezi s plačili in izmenjavami fiskalnih, tržnih ali pravnih računovodskih listin;
in
– določitve storitvenih komunikacijskih kanalov, protokolov in storitvenih primitivov za prenos podatkovnih enot aplikacijskega protokola.

General Information

Status
Published
Publication Date
03-May-2022
Withdrawal Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-May-2022
Completion Date
04-May-2022

Relations

Buy Standard

Standard
EN ISO 12855:2022 - BARVE
English language
164 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN ISO 12855:2016
Elektronsko pobiranje pristojbin - Izmenjava informacij med ponudnikom in
operaterjem cestninjenja (ISO 12855:2022)
Electronic fee collection - Information exchange between service provision and toll
charging (ISO 12855:2022)
Elektronische Gebührenerhebung - Informationsaustausch zwischen Dienstleistern und
Gebühreneinzugsunternehmen (ISO 12855:2022)
Perception du télépéage - Échange d'informations entre la prestation de service et la
perception du péage (ISO 12855:2022)
Ta slovenski standard je istoveten z: EN ISO 12855:2022
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12855
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes EN ISO 12855:2015
English Version
Electronic fee collection - Information exchange between
service provision and toll charging (ISO 12855:2022)
Perception du télépéage - Échange d'informations Elektronische Gebührenerhebung -
entre la prestation de service et la perception du péage Informationsaustausch zwischen Dienstleistern und
(ISO 12855:2022) Gebühreneinzugsunternehmen (ISO 12855:2022)
This European Standard was approved by CEN on 22 February 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12855:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12855:2022) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12855:2015.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12855:2022 has been approved by CEN as EN ISO 12855:2022 without any modification.

INTERNATIONAL ISO
STANDARD 12855
Third edition
2022-04
Electronic fee collection —
Information exchange between service
provision and toll charging
Perception du télépéage — Échange d'informations entre la
prestation de service et la perception du péage
Reference number
ISO 12855:2022(E)
ISO 12855:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 12855:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms.3
5 Architectural concepts and information exchanges . 4
5.1 Main roles in the toll charging environment . 4
5.2 Information exchange between toll charging and provision . 5
5.2.1 General . 5
5.2.2 Basic protocol mechanisms . 7
5.2.3 Exchange trust objects functionality . 8
5.2.4 Originating and providing EFC context data functionality . 8
5.2.5 Provide contract issuer information functionality . 9
5.2.6 Manage exception list functionality . 9
5.2.7 Report toll declarations functionality . 10
5.2.8 Report billing details functionality . 10
5.2.9 Payment settlement functionality . 11
5.2.10 Exchange enforcement data functionality .12
5.2.11 Process user complaints functionality . 13
5.2.12 Exchange quality assurance parameters functionality .13
5.2.13 Provide media settlement data functionality . . 14
6 Computational specification .14
6.1 Overview . 14
6.2 Application protocol data units . 17
6.2.1 General . 17
6.2.2 Application protocol control information (APCI) . 19
6.2.3 Application data units .20
6.2.4 ADU identification .20
6.2.5 ADU action code . 21
6.2.6 User identification . 21
6.3 RequestAdu data structure . .22
6.4 AckAdu data structure .25
6.5 StatusAdu data structure . 32
6.6 TrustObjectAdu data structure . 32
6.7 EfcContextDataAdu data structure . 39
6.7.1 General .39
6.7.2 GeneralContextData type .40
6.7.3 MeshedContextData type . 57
6.7.4 Common data structures .66
6.8 ContractIssuerListAdu data structure .88
6.9 ExceptionListAdu data structure .90
6.10 ReportAbnormalObeAdu data structure .94
6.11 TollDeclarationAdu data structure . 95
6.12 BillingDetailsAdu data structure.99
6.12.1 General .99
6.12.2 UsageList data type.101
6.12.3 AssociatedEventData data type . 111
6.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.