EN ISO 13141:2024
(Main)Electronic fee collection - Localization augmentation communication for autonomous systems (ISO 13141:2024)
Electronic fee collection - Localization augmentation communication for autonomous systems (ISO 13141:2024)
This document establishes requirements for short-range communication for the purposes of augmenting the localization in autonomous electronic fee collection (EFC) systems. Localization augmentation serves to inform on-board equipment (OBE) about geographical location and the identification of a charge object. This document specifies the provision of location and heading information and security means to protect against the manipulation of the OBE with false RSE.
The localization augmentation communication (LAC) takes place between an OBE in a vehicle and fixed RSE. This document is applicable to OBE in an autonomous mode of operation.
This document specifies attributes and functions for the purpose of localization augmentation, by making use of the dedicated short-range communications (DSRC) communication services provided by DSRC Layer 7, and makes these LAC attributes and functions available to the LAC applications at the RSE and the OBE. Attributes and functions are specified on the level of application data units (ADUs; see Figure 1).
As depicted in Figure 1, this document is applicable to:
— the application interface definition between OBE and RSE;
— the interface to the DSRC application layer, as specified in ISO 15628 and EN 12834;
— the use of the DSRC stack.
The LAC is suitable for a range of short-range communication media. This document provides specific definitions regarding the CEN-DSRC stack as specified in EN 15509. Annexes C, D, E and H provide for the use of the Italian DSRC as specified in ETSI/ES 200 674-1, ISO CALM IR ARIB DSRC and WAVE DSRC.
This document contains a protocol implementation conformance statement (PICS) proforma in Annex B and transaction examples in Annex F. Annex G highlights how to use this document for the European Electronic Toll Service (EETS).
Test specifications are not within the scope of this document.
Elektronische Gebührenerhebung - Kommunikation zur genauen Ortsbestimmung für autonome Systeme (ISO 13141:2024)
Perception de télépéage - Communications d'augmentation de localisations pour systèmes autonomes (ISO 13141:2024)
Le présent document définit les exigences pour une communication à courte portée en vue de mettre en place l'augmentation de localisations dans les systèmes de perception de télépéage (EFC) autonomes. L'augmentation de localisations sert à informer les équipements embarqués (OBE) de leur position géographique et à l'identification d'un objet d'imputation. Le présent document spécifie la mise à disposition des informations de localisation et de direction, et constitue une protection contre la manipulation des équipements embarqués par des équipements en bord de route (RSE) frauduleux.
Les communications d'augmentation de localisations (LAC, Localization Augmentation Communication) s'effectuent entre l'équipement embarqué sur un véhicule et un équipement en bord de route fixe. Le présent document s'applique aux équipements embarqués autonomes.
Le présent document spécifie des attributs et des fonctions pour l'augmentation de localisations au moyen des services de communication à courte portée fournis par la couche DSRC 7 et met ces attributs et ces fonctions LAC à la disposition des applications LAC au niveau des équipements en bord de route et des équipements embarqués. Les attributs et les fonctions sont spécifiés au niveau des unités de données d'application (ADU, application data unit; voir la Figure 1).
Comme cela est représenté à la Figure 1, le présent document s'applique:
— à la définition de l'interface d'application entre l'équipement embarqué (OBE) et l'équipement en bord de route (RSE);
— à l'interface avec la couche d'application DSRC spécifiée dans l'ISO 15628 et l'EN 12834;
— à l'utilisation de la pile de communication DSRC.
Les communications d'augmentation de localisations (LAC) conviennent à une gamme de supports de communication à courte portée. Le présent document fournit des définitions spécifiques à la pile CEN-DSRC, comme cela est spécifié dans l'EN 15509. Les Annexes C, D, E et H spécifient l'utilisation de la pile UNI DSRC (Italie) conformément à l'ETSI/ES 200 674-1, l'ISO CALM IR, ARIB DSRC et WAVE DSRC.
Le présent document fournit un formulaire de déclaration de conformité d'une mise en œuvre de protocole (PICS, Protocol Implementation Conformance Statement) à l'Annexe B, ainsi que des exemples de transactions à l'Annexe F. L'Annexe G souligne comment utiliser le présent document pour le service européen de télépéage (SET).
Le présent document ne s'applique pas aux spécifications d'essai.
Elektronsko pobiranje pristojbin - Lokalizacija povečane gostote komunikacije za avtonomne sisteme (ISO 13141:2024)
Standard ISO 13141:2015 vzpostavlja zahteve za komunikacijo kratkega dosega za namene povečanja gostote lokalizacije v avtonomnih sistemih za elektronsko pobiranje pristojbin (EFC). Na podlagi lokalizacije povečane gostote lahko oprema, vgrajena v vozilo (OBE), prejema podatke o geografski lokaciji in identiteti objekta zaračunavanja. Ta mednarodni standard določa način posredovanja podatkov o lokaciji in poti objekta ter varnostne ukrepe za preprečevanje vpliva na opremo, vgrajeno v vozilo, z napačno obcestno opremo (RSE).
Med opremo, vgrajeno v vozilo, in nameščeno obcestno opremo steče komunikacija z lokalizacijo povečane gostote. Ta mednarodni standard se uporablja za opremo, vgrajeno v vozilo, v avtonomnem načinu delovanja.
Standard ISO 13141:2015 določa atribute in funkcije za namene lokalizacije povečane gostote na podlagi storitev namenske komunikacije kratkega dosega (DSRC) 7. ravni ter omogoča uporabo teh atributov in funkcij za komunikacijo z lokalizacijo povečane gostote v obcestni opremi in opremi, vgrajeni v vozilo. Atributi in funkcije so določeni na ravni aplikacijskih podatkovnih enot (ADU, glej sliko 1).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN ISO 13141:2016
SIST EN ISO 13141:2016/A1:2017
Elektronsko pobiranje pristojbin - Lokalizacija povečane gostote komunikacije za
avtonomne sisteme (ISO 13141:2024)
Electronic fee collection - Localization augmentation communication for autonomous
systems (ISO 13141:2024)
Elektronische Gebührenerhebung - Kommunikation zur genauen Ortsbestimmung für
autonome Systeme (ISO 13141:2024)
Perception de télépéage - Communications d'augmentation de localisations pour
systèmes autonomes (ISO 13141:2024)
Ta slovenski standard je istoveten z: EN ISO 13141:2024
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13141
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 35.240.60; 03.220.20 Supersedes EN ISO 13141:2015
English Version
Electronic fee collection - Localization augmentation
communication for autonomous systems (ISO
13141:2024)
Perception de télépéage - Communications Elektronische Gebührenerhebung - Kommunikation
d'augmentation de localisations pour systèmes zur genauen Ortsbestimmung für autonome Systeme
autonomes (ISO 13141:2024) (ISO 13141:2024)
This European Standard was approved by CEN on 8 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13141:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 13141:2024) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13141:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 13141:2024 has been approved by CEN as EN ISO 13141:2024 without any modification.
International
Standard
ISO 13141
Second edition
Electronic fee collection —
2024-02
Localization augmentation
communication for autonomous
systems
Perception de télépéage — Communications d'augmentation de
localisations pour systèmes autonomes
Reference number
ISO 13141:2024(en) © ISO 2024
ISO 13141:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 13141:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 3
4 Abbreviated terms . 4
5 Application interface architecture . 5
5.1 General .5
5.2 Services provided.5
5.3 Attributes .6
5.4 Contract and toll context .6
5.5 Use of lower layers .6
5.5.1 Supported DSRC communication stacks .6
5.5.2 The use of the CEN DSRC stack .7
6 Conformance . 7
6.1 Conformance requirements .7
6.2 Conformance statement .7
6.3 Conformance evaluation and testing .7
7 Functions . 7
7.1 General .7
7.2 Functional requirements . .7
7.2.1 Minimum supported transaction details .7
7.2.2 Initialising communication .8
7.2.3 Writing of data .8
7.2.4 Termination of communication .8
7.3 Security .8
7.3.1 General .8
7.3.2 Authentication of RSE — Access credentials .9
7.3.3 Authentication of LAC Data .9
8 Attributes . 9
8.1 General .9
8.2 Data regarding location reference .10
8.3 Operational data .11
8.4 OBE contractual data .11
8.5 Security-related data . 12
9 Transaction model .12
9.1 General . 12
9.2 Initialisation phase . 13
9.2.1 General structure . 13
9.2.2 LAC application-specific contents of the BST . 13
9.2.3 LAC application-specific contents of the VST . 13
9.3 Transaction phase.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.