EN ISO 22553-4:2020

SLOVENSKI STANDARD
01-januar-2021
Barve in laki - Elektrodepozicijski premazi - 4. del: Združljivost
elektrodepozicijskih premazov s tekočinami, pastami in trdnimi snovmi (ISO 22553
-4:2019)
Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-
deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553
-4:2019)
Beschichtungsstoffe - Elektrotauchlacke - Teil 4: Verträglichkeit von Elektrotauchlacken
mit flüssigen, pastösen und festen Fremdmaterialien (ISO 22553-4:2019)
Peintures et vernis - Peintures d'électrodéposition - Partie 4: Compatibilité des peintures
d'électrodéposition avec des matières liquides, pâteuses et solides (ISO 22553-4:2019)
Ta slovenski standard je istoveten z: EN ISO 22553-4:2020
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22553-4
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Electro-deposition coatings - Part 4:
Compatibility of electro-deposition coating materials with
liquid, paste-like and solid foreign materials (ISO 22553-
4:2019)
Peintures et vernis - Peintures d'électrodéposition - Beschichtungsstoffe - Elektrotauchlacke - Teil 4:
Partie 4: Compatibilité des peintures Verträglichkeit von Elektrotauchlacken mit flüssigen,
d'électrodéposition avec des matières liquides, pastösen und festen Fremdmaterialien (ISO 22553-
pâteuses et solides (ISO 22553-4:2019) 4:2019)
This European Standard was approved by CEN on 30 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22553-4:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 22553-4:2019 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22553-4:2019 has been approved by CEN as EN ISO 22553-4:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 22553-4
First edition
2019-10
Paints and varnishes —
Electro-deposition coatings —
Part 4:
Compatibility of electro-deposition
coating materials with liquid, paste-
like and solid foreign materials
Peintures et vernis — Peintures d'électrodéposition —
Partie 4: Compatibilité des peintures d'électrodéposition avec des
matières liquides, pâteuses et solides
Reference number
ISO 22553-4:2019(E)
©
ISO 2019
ISO 22553-4:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 22553-4:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles . 2
5 Apparatus and materials. 2
6 Reagents . 3
7 Foreign materials . 3
8 Test panels . 3
9 Method A — Direct contamination . 3
9.1 Blank test . 3
9.2 Number of determinations . 4
9.3 Contamination of the electro-deposition tank with foreign material . 4
9.3.1 Liquid foreign material . 4
9.3.2 Paste-like foreign material . 4
9.3.3 Solid foreign materials . 5
9.4 Coating of the test panels . 6
9.5 Evaluation . 6
10 Method B — Contact contamination . 6
10.1 Blank test . 6
10.2 Number of determinations . 6
10.3 Contamination of the test panels . 6
10.4 Coating of the test panels . 6
10.5 Evaluation . 7
11 Method C — Contamination during the stoving process . 7
11.1 Blank test . 7
11.2 Number of determinations . 7
11.3 Coating of the test panel . 7
11.4 Preparation of the base panel with the foreign material . 7
11.5 Stoving of the test specimens . 8
11.6 Evaluation . 8
12 Precision . 8
13 Test report . 9
Bibliography .10
ISO 22553-4:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may
...