Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies

This draft European Standard describes and specifies the characteristics and performance requirements for assemblies made of tubing and hoses complying with EN 16436-1 to be used in the same conditions.
All connections are given in Annex B.
This draft European Standard only defines specific connections which are not defined in other standards (e.g. EN 16129).

Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemische in der Gasphase - Teil 2: Schlauchleitungen

Dieses Dokument legt die Merkmale und Leistungsanforderungen für Schlauchleitungen fest, die aus Schläuchen mit und ohne Einlage entsprechend EN 16436-1:2014+A2:2018 hergestellt und unter den gleichen Bedingungen verwendet werden.
Alle Anschlussverbindungen werden im Anhang B aufgelistet.
Dieses Dokument legt ausschließlich bestimmte Anschlussverbindungen fest, die nicht in anderen Normen (z. B. EN 16129) festgelegt sind.

Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 2 : Flexibles

La présente Norme européenne décrit et spécifie les caractéristiques et les exigences de performance des flexibles constitués de tubes et de tuyaux conformes à l'EN 16436-1, à utiliser dans les mêmes conditions.
Tous les raccords sont indiqués dans l'Annexe B.
La présente Norme européenne ne définit que les raccords spécifiques qui ne sont pas définis dans d'autres normes (par exemple l'EN 16129).

Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v plinastem stanju - 2. del: Priključki

Ta osnutek evropskega standarda opisuje in določa značilnosti in zahteve glede delovanja cevovodov in priključkov v skladu s standardom EN 16436-1, ki se uporabljajo v enakih pogojih.
Vse povezave so podane v dodatku B.
Ta osnutek evropskega standarda opredeljuje samo posebne povezave, ki niso opredeljene v drugih standardih (npr. EN 16129).

General Information

Status
Published
Publication Date
11-Dec-2018
Withdrawal Date
29-Jun-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Dec-2018
Due Date
16-Nov-2018
Completion Date
12-Dec-2018

Buy Standard

Standard
EN 16436-2:2019
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemische in der Gasphase - Teil 2: SchlauchleitungenTuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 2 : FlexiRubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies83.140.30Plastics pipes and fittings for non fluid useICS:Ta slovenski standard je istoveten z:EN 16436-2:2018SIST EN 16436-2:2019en,fr,de01-april-2019SIST EN 16436-2:2019SLOVENSKI
STANDARD



SIST EN 16436-2:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16436-2
December
t r s z ICS
t uä r v rä y r English Version
Rubber and plastics hosesá tubing and assemblies for use with propane and butane and their mixture in the vapour phase æ Part
tã Assemblies Tuyauxá tubes et flexibles en caoutchouc et en plastiquepour utilisation avec le propaneá le butane et leurs mélanges en phase vapeur æ Partie
t ã Flexibles
Gummiæ und KunststoffæSchläuche und æSchlauchleitungen mit und ohne Einlage zur Verwendung mit Propaná Butan und deren Gemische in der Gasphase æ Teil
tã Schlauchleitungen This European Standard was approved by CEN on
t { July
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x v u xæ tã t r s z ESIST EN 16436-2:2019



EN 16436-2:2018 (E) 2
Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Fixing of the coupling . 5 5 General requirements for couplings and assemblies . 5 5.1 Materials . 5 5.2 Length of assembly . 6 5.3 Securing of couplings on hoses or tubing . 6 5.4 Design of couplings for use in assemblies . 6 5.5 Utilization of class 1 tubing and class 2 hoses with hose tails which are part of an auxiliary equipment as regulating devices or gas appliances . 7 6 Performance requirements for assemblies and tubing clamp kits . 7 6.1 Integrity before and after ageing. 7 6.2 Clamps . 7 6.3 Corrosion resistance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.