Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements

This document specifies the terms, definitions, test conditions, test methods and requirements for rating the performance of air conditioners and liquid chilling packages, with electrically driven compressors and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled condenser is cooled by air and by the evaporation of external additional water. This additional external water is fed by a specific water supply circuit or by a water tank.
This document is not applicable to air-to-air and air-to-water air conditioners with a condenser cooled by air and by the evaporation of water condensed on their evaporator.
This document is applicable to units equipped with a water tank or with a continuous water circuit supply that can also operate without water feeding. However, this document only concerns the testing of these units with water feeding.
This document is applicable to factory-made units which can be ducted.
This document is applicable to factory-made units of either fixed capacity or variable capacity by any means.
Packaged units, single split and multisplit systems are covered by this document.
With regard to units consisting of several parts, this document applies only to those designed and supplied as a complete package.
For evaporatively cooled condenser units that can also operate in heating mode, their performance in this mode is determined according to EN 14511:2022 (all parts).
Units used for industrial processes cooling are not within the scope of this document.
This document specifies the conditions for which performance data will be declared for compliance with the Ecodesign Regulation 206/2012 and with the Energy Labelling Regulation 626/2011 of air conditioners with evaporatively cooled condenser in cooling mode.
NOTE   All the symbols given in this text can be used regardless of language.

Luftkonditionierer und Flüssigkeitskühlsätze mit verdunstungsgekühltem Verflüssiger und elektrisch angetriebenen Verdichtern für die Raumkühlung - Begriffe, Prüfbedingungen, Prüfverfahren und Anforderungen

Dieses Dokument legt die Begriffe, Prüfbedingungen und Prüfverfahren sowie die Anforderungen an die Einstufung der Leistung von Luftkonditionierern und Flüssigkeitskühlsätzen mit elektrisch angetriebenen Verdichtern und verdunstungsgekühltem Verflüssiger für die Raumkühlung fest. Der verdunstungsgekühlte Verflüssiger wird durch Belüftung und durch Verdunstung von zusätzlichem, von außen zugeführtem Wasser gekühlt. Dieses zusätzliche Wasser wird über einen speziellen Wasserversorgungskreislauf oder einen Wasserbehälter von außen zugeführt.
Dieses Dokument ist nicht anwendbar für Luft/Luft- und Luft/Wasser-Luftkonditionierer, deren Verflüssiger durch Belüftung und durch Verdunstung des an ihrem Verdampfer kondensierten Wassers gekühlt wird.
Dieses Dokument ist anwendbar für Geräte, die mit einem Wasserbehälter oder einem Wasserkreislauf mit konstanter Versorgung versehen sind, die auch ohne Wasserzuleitung betrieben werden können. Dieses Dokument behandelt jedoch nur die Prüfung dieser Geräte für den Fall der Wasserzuleitung.
Dieses Dokument ist anwendbar für werksseitig zusammengebaute Geräte, die mit Luftkanalanschlüssen versehen sein können.
Dieses Dokument ist anwendbar für werksseitig zusammengebaute Geräte mit fester Leistung oder mit beliebigen Mitteln zu verändernder Leistung (variable Leistung).
Kompaktgeräte, Einzelgeräte in Split-Bauweise und Multi-Split-Systeme fallen in den Anwendungsbereich dieses Dokuments.
Wenn die Geräte aus mehreren Teilen bestehen, ist dieses Dokument nur für die Teile anwendbar, die als vollständige Funktionseinheit konstruiert und geliefert werden.
Die Leistung von Geräten mit verdunstungsgekühltem Verflüssiger, die auch im Heizbetriebarbeiten können, wird in dieser Betriebsart nach EN 14511:2022 (alle Teile) bestimmt.
Geräte für die Kühlung industrieller Prozesse fallen nicht in den Anwendungsbereich dieses Dokuments.
Dieses Dokument legt die Bedingungen fest, für die die leistungsbezogenen Daten zum Zwecke der Übereinstimmung mit der Ökodesign-Verordnung 206/2012 und der Energiekennzeichnungs-Veror-dnung 626/2011 für Luftkonditionierer mit verdunstungsgekühltem Verflüssiger im Kühlbetrieb angegeben werden.
ANMERKUNG   Sämtliche in diesem Text enthaltenen Symbole können unabhängig von der verwendeten Sprache verwendet werden.

Climatiseurs et groupes refroidisseurs de liquide à condenseur refroidi par évaporation et compresseur entraîné par moteur électrique pour la réfrigération des locaux - Termes, définitions, conditions d'essai, méthodes d'essai et exigences

Le présent document spécifie les termes, définitions, conditions d’essai, méthodes d’essai et exigences relatives à la détermination des caractéristiques nominales et aux performances des climatiseurs et groupes refroidisseurs de liquide à compresseur entraîné par moteur électrique et condenseur refroidi par évaporation utilisés pour le refroidissement des locaux. Le condenseur est refroidi par air et par évaporation d’eau extérieure supplémentaire. Cette source extérieure d'eau supplémentaire provient d’un circuit d’alimentation en eau spécifique ou d’un réservoir d’eau.
Le présent document n’est pas applicable aux climatiseurs air/air et air/eau avec un condenseur refroidi par air et par évaporation des condensats de l’évaporateur.
Le présent document est applicable aux appareils avec un réservoir d’eau ou avec un circuit d’eau en alimentation continue qui peuvent également fonctionner sans apport d’eau. Cependant le présent document concerne uniquement les essais de ces appareils avec alimentation en eau.
Le présent document est applicable aux appareils fabriqués en usine qui peuvent être raccordés.
Le présent document est applicable aux appareils fabriqués en usine de capacité fixe ou variable par tous les moyens.
Le présent document couvre les systèmes monoblocs, à deux éléments séparés et multi-split.
Dans le cas d’appareils à éléments séparés, le présent document ne s'applique qu'aux appareils conçus et fournis comme un ensemble complet.
Pour les appareils à condenseur refroidi par évaporation qui peuvent également fonctionner en mode chauffage, leur performance, dans ce mode est déterminée selon l’EN 14511:2022 (toutes les parties).
Les appareils utilisés pour le refroidissement des procédés industriels ne sont pas inclus dans le domaine d’application du présent document.
Le présent document spécifie les conditions pour lesquelles les données de performance seront déclarées pour la conformité avec le Règlement Ecoconception n° 206/2012 et avec le Règlement Etiquetage énergétique n° 626/2011 des climatiseurs à condenseur refroidi par évaporation en mode refroidissement.

Klimatske naprave in enote za tekočinsko hlajenje s kondenzatorjem, ohlajenim z izhlapevanjem, in električnimi kompresorji za hlajenje prostora - Izrazi, definicije, preskusni pogoji, preskusne metode in zahteve

Ta dokument določa izraze, definicije, preskusne pogoje, preskusne metode in zahteve za ocenjevanje učinkovitosti klimatskih naprav in enot za tekočinsko hlajenje s kondenzatorjem, ohlajenim z izhlapevanjem, in električnimi kompresorji za hlajenje prostorov. Kondenzator se hladi z zrakom in z izhlapevanjem zunanje dodatne vode. Ta dodatna zunanja voda se napaja iz posebne vodovodne napeljave ali rezervoarja za vodo.
Ta dokument se ne uporablja za klimatske naprave zrak-zrak in zrak-voda s kondenzatorjem, ki se hladi z zrakom in z izhlapevanjem vode, kondenzirane na njihovem uparjalniku.
Dokument se uporablja za enote, opremljene z rezervoarjem za vodo ali z neprekinjenim dovodom vode, ki lahko delujejo tudi brez dotoka vode. Vendar ta dokument zadeva samo preskušanje teh enot z dotokom vode.
Dokument se uporablja za tovarniško izdelane enote, ki jih je mogoče opremiti s kanali.
Dokument se uporablja za tovarniško izdelane enote bodisi fiksne ali spremenljive zmogljivosti.
Ta dokument zajema pakirane enote in sisteme z enim ali več razcepi.
Pri enotah, sestavljenih iz več delov, se ta dokument uporablja samo za tiste, ki so projektirane in dostavljene kot celoten paket.
Za kondenzatorske enote, ki se hladijo z izhlapevanjem in lahko delujejo tudi v načinu ogrevanja, je njihova zmogljivost v tem načinu določena v skladu s standardom EN 14511 (vsi deli).
Instalacije, uporabljene za hlajenje industrijskih procesov, ne sodijo na področje uporabe tega standarda.
Ta dokument določa pogoje za podatke o delovanju, ki zagotavljajo skladnost z Uredbo o okoljsko primerni zasnovi klimatskih naprav 206/2012 in Uredbo o energijskem označevanju 626/2011 klimatskih naprav s kondenzatorjem, ki se v načinu hlajenja hladi z izhlapevanjem.
OPOMBA:   Vse simbole v tem besedilu je mogoče uporabiti ne glede na jezik.

General Information

Status
Published
Publication Date
20-Dec-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Dec-2022
Due Date
27-Jul-2023
Completion Date
21-Dec-2022

Relations

Buy Standard

Standard
EN 15218:2023
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2023
Nadomešča:
SIST EN 15218:2014
Klimatske naprave in enote za tekočinsko hlajenje s kondenzatorjem, ohlajenim z
izhlapevanjem, in električnimi kompresorji za hlajenje prostora - Izrazi, definicije,
preskusni pogoji, preskusne metode in zahteve
Air conditioners and liquid chilling packages with evaporatively cooled condenser and
with electrically driven compressors for space cooling - Terms, definitions, test
conditions, test methods and requirements
Luftkonditionierer und Flüssigkeitskühlsätze mit verdunstungsgekühltem Verflüssiger und
elektrisch angetriebenen Verdichtern für die Raumkühlung - Begriffe, Prüfbedingungen,
Prüfverfahren und Anforderungen
Climatiseurs et groupes refroidisseurs de liquide à condenseur refroidi par évaporation et
compresseur entraîné par moteur électrique pour la réfrigération des locaux - Termes,
définitions, conditions d'essai, méthodes d'essai et exigences
Ta slovenski standard je istoveten z: EN 15218:2022
ICS:
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 15218
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 27.200; 91.140.30 Supersedes EN 15218:2013
English Version
Air conditioners and liquid chilling packages with
evaporatively cooled condenser and with electrically
driven compressors for space cooling - Terms, definitions,
test conditions, test methods and requirements
Climatiseurs et groupes refroidisseurs de liquide à Luftkonditionierer und Flüssigkeitskühlsätze mit
condenseur refroidi par évaporation et compresseur verdunstungsgekühltem Verflüssiger und elektrisch
entraîné par moteur électrique pour la réfrigération angetriebenen Verdichtern für die Raumkühlung -
des locaux - Termes, définitions, conditions d'essai, Begriffe, Prüfbedingungen, Prüfverfahren und
méthodes d'essai et exigences Anforderungen
This European Standard was approved by CEN on 7 November 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15218:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Classification . 6
5 Test conditions . 6
5.1 Environmental conditions and electrical power supply requirements . 6
5.2 Rating conditions . 6
6 Rating capacity test . 10
6.1 Basic principles . 10
6.2 Test apparatus. 11
6.2.1 Arrangement of the test apparatus. 11
6.2.2 Installation and connection of the test object. 11
6.3 Uncertainties of measurement . 11
6.4 Test procedure . 12
6.4.1 General . 12
6.4.2 Steady state condition . 12
6.4.3 Output measurement for units with water tank . 12
6.4.4 Output measurement for units with continuous supply water circuit . 13
6.4.5 Data to be recorded . 13
7 Electrical consumptions for single duct and double duct units . 14
7.1 Determination of power consumption due to standby mode . 14
7.2 Determination of power consumption in off-mode . 14
7.3 Electricity consumption . 14
8 Air flow rate measurement of ducted units . 14
9 Test report . 14
9.1 General information . 14
9.2 Rating test results . 14
10 Requirements . 15
11 Instructions . 15
Annex ZA (informative) Relationship between this European Standard and the
requirements of Commission Regulation (EU) No 206/2012 [OJEU L 72/7-27,
10.3.2012] aimed to be covered . 16
Annex ZB (informative) Relationship between this European Standard and the
requirements of Commission Regulation (EU) No 626/2011 [OJEU L 178/1-72,
6.7.2011] aimed to be covered . 18

European foreword
This document (EN 15218:2022) has been prepared by Technical Committee CEN/TC 113 “Heat pumps
and air conditioners”, the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15218:2013.
— alignment with the EN 14511 series under revision;
— addition of Annex ZB relating to Commission Regulation (EU) No 626/2011 aimed to be covered.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annexes ZA and ZB, which are
integral parts of this document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the terms, definitions, test conditions, test methods and requirements for rating
the performance of air conditioners and liquid chilling packages, with electrically driven compressors
and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled
condenser is cooled by air and by the evaporation of external additional water. This additional external
water is fed by a specific water supply circuit or by a water tank.
This document is not applicable to air-to-air and air-to-water air conditioners with a condenser cooled
by air and by the evaporation of water condensed on their evaporator.
This document is applicable to units equipped with a water tank or with a continuous water circuit supply
that can also operate without water feeding. However, this document only concerns the testing of these
units with water feeding.
This document is applicable to factory-made units which can be ducted.
This document is applicable to factory-made units of either fixed capacity or variable capacity by any
means.
Packaged units, single split and multisplit systems are covered by this document.
With regard to units consisting of several parts, this document applies only to those designed and
supplied as a complete package.
For evaporatively cooled condenser units that can also operate in heating mode, their performance in this
mode is determined according to EN 14511:2022 (all parts).
Units used for industrial processes cooling are not within the scope of this document.
This document specifies the conditions for which performance data will be declared for compliance with
the Ecodesign Regulation 206/2012 and with the Energy Labelling Regulation 626/2011 of air
conditioners with evaporatively cooled condenser in cooling mode.
NOTE All the symbols given in this text can be used regardless of language.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 14511-1:2022, Air conditioners, liquid chilling packages and heat pumps for space heating and cooling
and process chillers, with electrically driven compressors - Part 1: Terms and definitions
EN 14511-2:2022, Air conditioners, liquid chilling packages and heat pumps for space heating and cooling
and process chillers, with electrically driven compressors - Part 2: Test conditions
EN 14511-3:2022, Air conditioners, liquid chilling packages and heat pumps for space heating and cooling
and process chillers, with electrically driven compressors - Part 3: Test methods
EN 14511-4:2022, Air conditioners, liquid chilling packages and heat pumps for space heating and cooling
and process chillers, with electrically driven compressors - Part 4: Requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 14511-1:2022 and the following
apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
evaporatively cooled condenser
heat exchanger that condenses refrigerant vapour by rejecting heat to a water and air mixture causing
the water to evaporate and increase the enthalpy of air
Note 1 to entry: Desuperheating and sub-cooling of the refrigerant ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.