iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14296:2015+A1:2018

(Main)

Sanitary appliances - Communal washing troughs

Sanitary appliances - Communal washing troughs

This document specifies requirements for the cleanability, load resistance and durability of communal washing troughs used for domestic purposes.
NOTE   For the purposes of this document, the term "domestic purposes" includes use in factory changing-rooms, sportsclubs, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Sanitärausstattungsgegenstände - Reihenwaschanlagen

Dieses Dokument legt Anforderungen an die Reinigbarkeit, statische Belastbarkeit und Dauerhaftigkeit von Reihenwaschanlagen für den Hausgebrauch fest.
ANMERKUNG   Im Sinne dieses Dokuments schließt der Begriff "für den Hausgebrauch" den Einsatz in Werksumkleide¬räumen, Sportklubs, Studentenwohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein; ausgenommen ist die medizinische Verwendung.

Appareils sanitaires - Lavabos collectifs

La présente Norme Européenne détermine les prescriptions de performance en matière d’aptitude au nettoyage, de résistance à la charge et de durabilité des lavabos collectifs à usage domestique.
NOTE   Pour les besoins de ce document, les termes « à usage domestique » inclut  les usages dans les vestiaires des usines, des salles de sport, des foyers pour étudiants, des hôpitaux et autres bâtiments similaires sauf s’ils font l’objet de dispositions médicales particulières.

Sanitarna oprema - Skupinska umivalna korita

Ta dokument določa zahteve za čiščenje, odpornost in trpežnost skupinskih umivalnih korit za domačo uporabo.
OPOMBA: Za namene tega standarda izraz »domača uporaba« vključuje uporabo v garderobah tovarn, športnih klubih, namestitvah za študente, bolnišnicah in podobnih stavbah, razen če so potrebna posebna medicinska določila.

General Information

Status
Published
Publication Date
16-Oct-2018
ICS
91.140.70 - Sanitary installations
Technical Committee
CEN/TC 163 - Sanitary appliances
Drafting Committee
CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-May-2021
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
Ref Project
SIST EN 14296:2015+A1:2018 - Sanitary appliances - Communal washing troughs

Relations

Merged From
EN 14296:2015/prA1 - Sanitary appliances - Communal washing troughs
Effective Date
06-Jun-2018
Merged From
EN 14296:2015 - Sanitary appliances - Communal washing troughs
Effective Date
06-Jun-2018

Buy Standard

EN 14296:2015+A1:2018EN 14296:2015+A1:2018
PreviousNext
Standard
EN 14296:2015+A1:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitarna oprema - Skupinska umivalna koritaSanitärausstattungsgegenstände - ReihenwaschanlagenAppareils sanitaires - Lavabos collectifsSanitary appliances - Communal washing troughs91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 14296:2015+A1:2018SIST EN 14296:2015+A1:2018en,fr,de01-december-2018SIST EN 14296:2015+A1:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14296:2015+A1
October
t r s z ICS
{ sä s v rä y r English Version
Sanitary appliances æ Communal washing troughs Appareils sanitaires æ Lavabos collectifs
Sanitärausstattungsgegenstände æ Reihenwaschanlagen This European Standard was approved by CEN on
t z May
t r s w and includes Amendment
s approved by CEN on
s v April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v t { xã t r s w ªA sã t r s z ESIST EN 14296:2015+A1:2018

Relationship of this European Standard with Regulation (EU) No. 305/2011 . 16 Bibliography . 18
This document supersedes !EN 14296:2015".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with EU Construction Products Regulation, see informative Annex ZA, which is an integral part of this document. !The main changes introduced in EN 14296 were the following: a) introduction of a new Annex ZA according to the latest template (in the format of TF N 678 rev 1 of 2015-06-02); b) modification of the marking of products;
c) modification of the clause “Test samples, testing and compliance criteria”; d) editorial modifications as agreed between representatives of EU/DG Growth, CEN/TC 163 and FECS on 2016-07-07 in Brussels for citation of standard in OJEU." According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14296:2015+A1:2018

!Characteristics" 4.1 General !instructions on installation, use and care shall be supplied. The waste outlet hole shall comply with the dimensions as specified in EN 695, unless the waste fitting is provided
with the washing trough." SIST EN 14296:2015+A1:2018

a) Wall mounted trough, viewed from the side Dimensions in millimetres
b) Wall mounted trough, viewed from above
c) Free standing trough, viewed from the side SIST EN 14296:2015+A1:2018

d) Free standing trough, viewed from above Key 1 one bag of 250,50+kg or two bags of 12,50,250+kg Figure 1 — Installation for load test - Test on the rim Note any crack, collapse or permanent distortion preventing water from draining trough the waste hole. SIST EN 14296:2015+A1:2018

a) Wall mounted trough, viewed from the side
b) Wall mounted trough, viewed from above
c) Free standing trough, viewed from the side SIST EN 14296:2015+A1:2018

d) Free standing trough, viewed from above Key 1 three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2 — Installation for load test - Test on the rim Note any crack, or collapse of the trough. SIST EN 14296:2015+A1:2018
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17426:2019(Main)
Sanitary appliances - Drainage systems for the application of sanitary appliances
SIST-TP CEN/TR 17426:2019

This document describes the installation rules that must be followed to ensure proper functioning of the drainage system depending on the specified performance of the sanitary appliances.
These performance characteristics of sanitary appliances (defined in the harmonized standards EN 997, EN 13407, EN 14688, EN 14528 and EN 14527) are explained and brought into line with the application rules of standard series EN 12056.
According to Regulation (EU) 305/2011, legally binding information on building requirements must be provided by the National Product Information Point. Therefore, additional national requirements are mentioned informatively where information is available.

  • Technical report
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 33:2019(Main)
WC pans and WC suites - Connecting dimensions
SIST EN 33:2019

This document specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture.
This document does not apply to siphonic action WC pans and WC suites.
NOTE 1   Other connecting dimensions are permitted, e.g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings.
NOTE 2   The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14527:2016+A1:2018(Main)
Shower trays for domestic purposes
SIST EN 14527:2016+A1:2019

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing shower trays.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14516:2015+A1:2018(Main)
Baths for domestic purposes
SIST EN 14516:2015+A1:2019

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability.
This European Standard is applicable to all sizes and shapes of baths.
This European Standard does not cover baths for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing baths.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14428:2015+A1:2018(Main)
Shower enclosures - Functional requirements and test methods
SIST EN 14428:2015+A1:2019

This European Standard specifies "characteristics" for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional "characteristics".
NOTE   For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12764:2015+A1:2018(Main)
Sanitary appliances - Specification for whirlpool baths
SIST EN 12764:2015+A1:2019

This European Standard specifies "characteristics" for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery.
Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60.
Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard.
For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings.
Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision.
NOTE 1   It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility.
NOTE 2   When EN 60335-2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13407:2015+A1:2018(Main)
Wall-hung urinals - Functional requirements and test methods
SIST EN 13407:2015+A1:2018

This European Standard specifies constructional and performance requirements together with test methods for wall-hung urinals made of vitreous china or stainless steel that are used for personal hygiene.
This European Standard does not apply to slab and stall urinals nor to waterless urinals.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14688:2015+A1:2018(Main)
Sanitary appliances - Wash basins - Functional requirements and test methods
SIST EN 14688:2015+A1:2018

This European Standard specifies the functional characteristics and test methods for wash basins for domestic purposes.
NOTE 1   For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
NOTE 2   All drawings are examples only. The shape of the appliance is left to the discretion of the manufacturer.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14528:2015+A1:2018(Main)
Bidets - Functional requirements and test methods
SIST EN 14528:2015+A1:2018

This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel.
All drawings are examples only, other forms are permissible.
NOTE   For the purposes of this standard the term ‘domestic purposes‘ includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 997:2018(Main)
WC pans and WC suites with integral trap
SIST EN 997:2018

This European Standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel.
This European Standard does not apply to squatting toilets, WC pans without integral trap or flushing cisterns as separate appliances.
In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.
In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed to be connected to drinking water installations inside buildings.
Before installation of WCs, EN 12056-2 and national requirements need to be taken into consideration.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day