EN 215:2004
(Main)Thermostatic radiator valves - Requirements and test methods
Thermostatic radiator valves - Requirements and test methods
This European Standard specifies definitions, requirements and test methods for thermostatic radiator valves (referred to hereafter as thermostatic valves).
This standard applies to two port thermostatic valves with or without pre-setting facility for fitting to radiators in wet central heating installations up to a water temperature of 120 °C and a nominal pressure of PN 10.
This standard further specifies the dimensions, the materials and the connection details of four series of straight and angle pattern thermostatic radiator valves of nominal pressure inferior or equal to PN 10.
This standard can be used as reference in a CEN/CENELEC Certification Mark System on thermostatic radiator valves.
Thermostatische Heizkörperventile - Anforderungen und Prüfung
Diese Europäische Norm hat den Zweck, Begriffe, Anforderungen und Prüfungen für thermostatische Heizkörper-ventile (nachstehend Thermostatventile genannt) festzulegen.
Die vorliegende Norm ist auf thermostatische Zweiwegeventile mit oder ohne Voreinstellung anzuwenden, die zur Ausrüstung von Heizkörpern in Warmwasserheizungen bis zu einer Temperatur von 120 °C und bis zu einem Nenndruck von PN 10 dienen.
Die vorliegende Norm legt ferner die Maße, Werkstoffe und Ausführungen des Anschlusses von vier Reihen von Heizkörperventilen in Durchgangs- und Eckform mit Nenndruck ≤ PN 10 fest.
Auf diese Norm kann in einem CEN/CENELEC-Zertifizierungssystem für thermostatische Heizkörperventile Bezug genommen werden.
Robinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes d'essai
Termostatni ventili za ogrevala - Zahteve in preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 15-Jun-2004
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 130 - Space heating appliances without integral heat sources
- Drafting Committee
- CEN/SS H07 - Space heating
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Sep-2019
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 22-Dec-2008
- Replaces
HD 1215-2:1988 - Thermostatic radiator valves - Part 2: Dimensions and details on connection - Effective Date
- 22-Dec-2008
- Replaces
EN 215-1:1987/AC1:1987 - Thermostatic radiator valves - Part 1: Requirements and test methods - Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
prEN 15116 - Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams - Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 215:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Thermostatic radiator valves - Requirements and test methods". This standard covers: This European Standard specifies definitions, requirements and test methods for thermostatic radiator valves (referred to hereafter as thermostatic valves). This standard applies to two port thermostatic valves with or without pre-setting facility for fitting to radiators in wet central heating installations up to a water temperature of 120 °C and a nominal pressure of PN 10. This standard further specifies the dimensions, the materials and the connection details of four series of straight and angle pattern thermostatic radiator valves of nominal pressure inferior or equal to PN 10. This standard can be used as reference in a CEN/CENELEC Certification Mark System on thermostatic radiator valves.
This European Standard specifies definitions, requirements and test methods for thermostatic radiator valves (referred to hereafter as thermostatic valves). This standard applies to two port thermostatic valves with or without pre-setting facility for fitting to radiators in wet central heating installations up to a water temperature of 120 °C and a nominal pressure of PN 10. This standard further specifies the dimensions, the materials and the connection details of four series of straight and angle pattern thermostatic radiator valves of nominal pressure inferior or equal to PN 10. This standard can be used as reference in a CEN/CENELEC Certification Mark System on thermostatic radiator valves.
EN 215:2004 is classified under the following ICS (International Classification for Standards) categories: 91.140.10 - Central heating systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 215:2004 has the following relationships with other standards: It is inter standard links to EN 215-1:1987, HD 1215-2:1988, EN 215-1:1987/AC1:1987, HD 1215-2:1988/AC1:1989, EN 215:2019, EN 12420:2024, EN 12164:2024, EN 12168:2024, EN 1982:2024, prEN 15116, EN 215:2004/A1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 215:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Termostatni ventili za ogrevala - Zahteve in preskusne metodeThermostatische Heizkörperventile - Anforderungen und PrüfungRobinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes d'essaiThermostatic radiator valves - Requirements and test methods91.140.10Sistemi centralnega ogrevanjaCentral heating systems23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 215:2004SIST EN 215:2004en,fr,de01-oktober-2004SIST EN 215:2004SLOVENSKI
STANDARDSIST HD 1215-2:1997SIST HD 1215-2:1997/AC1:1997SIST EN 215-1:1997SIST EN 215-1:1997/AC1:19971DGRPHãþD
SIST EN 215
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...