EN 14159:2014
(Main)Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
This European Standard specifies the maximum accepted tolerances on the dimensions and distortions in pattern, of rugs, runners, carpet tiles and wall-to-wall carpet.
NOTE These tolerances do not affect the functional characteristics of the floor covering.
Textile Bodenbeläge - Anforderungen an Toleranzen der (linearen) Maße von abgepassten Bodenbelägen, Läufern, Fliesen und Bahnenware und des Musterrapports
Diese Europäische Norm legt die größten zulässigen Abweichungen in den Maßen und die größten zulässigen Musterverzüge von abgepassten Bodenbelägen, Läufern, Fliesen und Bahnenware fest.
ANMERKUNG Diese Abweichungen beeinflussen nicht die Funktionseigenschaften des textilen Bodenbelags.
Revêtements de sol textiles - Exigences relatives aux tolérances sur les dimensions (linéaires) des tapis, passages, dalles de moquette et moquettes et aux tolérances sur le raccord de dessin
La présente Norme européenne indique les tolérances maximales acceptées sur les dimensions et les déformations du dessin des tapis, passages, dalles de moquette et moquettes.
NOTE Ces tolérances n’influent pas sur les caractéristiques fonctionnelles du revêtement de sol textile.
Tekstilne talne obloge - Dovoljene tolerance (linearnih) dimenzij preprog, tekačev, plošč in talnih oblog za popolno pokritje tal (od zidu do zidu) ter tolerance za ponovljivost vzorca
Ta tehnična specifikacija določa maksimalne sprejemljive tolerance pri dimenzijah in deformacijah vzorcev preprog, tekačev, plošč ter talnih oblog za popolno pokritje tal (od zidu do zidu). OPOMBA Te tolerance ne vplivajo na funkcionalne lastnosti talnih oblog.
General Information
- Status
- Published
- Publication Date
- 16-Dec-2014
- Withdrawal Date
- 29-Jun-2015
- Technical Committee
- CEN/TC 134 - Resilient and textile floor coverings
- Drafting Committee
- CEN/TC 134/WG 8 - Textile floor coverings
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 15-Dec-2020
- Completion Date
- 23-Sep-2025
Relations
- Effective Date
- 24-Dec-2014
Overview
EN 14159:2014 is a European standard developed by CEN that specifies requirements for tolerances on the linear dimensions and pattern repeat distortions in textile floor coverings. This standard applies to various types of floor coverings including rugs, runners, carpet tiles, and wall-to-wall carpets. Its primary purpose is to define the maximum accepted dimensional deviations and pattern distortions that may occur during manufacturing without affecting the functional characteristics of these floor coverings.
Maintaining these tolerances is essential for consistent product quality, reliable installation outcomes, and customer satisfaction. The standard facilitates clear communication between manufacturers and installers, providing a framework that balances technical manufacturing limitations and practical installation requirements.
Key Topics
Scope of Tolerances: Defines allowable deviations in the width, length, and pattern repeat of textile floor coverings. These tolerances ensure that despite minor size variations, the floor coverings remain fit for purpose.
Measurement Methods: Guidelines include specific procedures for measuring dimensions and pattern distortions, such as:
- Length and width measurements using precise length measuring devices and dividers.
- Assessment of pattern repeat distortion by measuring maximum and minimum extents of repeated patterns.
- Detection of bowing, linear pattern distortion, skewing, and arcing with detailed definitions and measurement techniques.
Dimensional Tolerances: Specifies tolerance limits based on type and size of floor coverings:
- Rugs and runners: ±2.0% on nominal dimensions.
- Wall-to-wall carpets: tolerances ranging from ±1.0% to ±1.25%, depending on carpet type and production.
- Carpet tiles: tighter tolerances, ±0.3% on nominal dimensions and ±0.2% within the same batch.
Pattern Tolerances: Defines maximum allowable pattern repeat deviation (e.g., max 2.0% for short repeats) and limits on bowing and skewing to ensure alignments remain aesthetically acceptable.
Arcing Allowances: Limits on the arcing of rolled carpet to prevent installation issues, with maximum deviations for woven and tufted carpets.
Applications
EN 14159:2014 plays an essential role in the textile floor covering industry, supporting quality assurance and product compliance for:
- Manufacturers who produce rugs, runners, tiles, and wall-to-wall carpets ensuring products meet established dimensional and pattern accuracy.
- Installers benefiting from clear metrics to assess whether slight dimensional deviations are within acceptable ranges, facilitating proper fitting and alignment.
- Quality control teams using this standard to monitor production consistency and product conformity before shipment.
- Retailers and buyers who require verification that products meet European tolerance requirements for size and pattern.
This standard helps avoid disputes over product defects related to dimensions or patterns, streamlines installation processes, and supports improved customer satisfaction in commercial and residential flooring projects.
Related Standards
For comprehensive quality and classification of textile floor coverings, EN 14159:2014 should be used alongside other key standards:
- EN 994: Determination of the side length, squareness, and straightness of carpet tiles.
- EN 1307: Classification of textile floor coverings to define product types and usage classes.
- EN 14215: Classification of machine-made pile rugs and runners.
Additionally, ISO standards such as ISO 2424:2007 (Textile floor coverings vocabulary) and ISO 3018 (Measurement of rectangular textile floor coverings) complement the measurement and terminology guidelines referenced within EN 14159.
Keywords: EN 14159, textile floor coverings, rugs, runners, carpet tiles, wall-to-wall carpet, dimensional tolerance, pattern repeat tolerance, carpet pattern distortion, carpet bowing, carpet skewing, carpet arcing, European standard, CEN floor covering standard.
Frequently Asked Questions
EN 14159:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat". This standard covers: This European Standard specifies the maximum accepted tolerances on the dimensions and distortions in pattern, of rugs, runners, carpet tiles and wall-to-wall carpet. NOTE These tolerances do not affect the functional characteristics of the floor covering.
This European Standard specifies the maximum accepted tolerances on the dimensions and distortions in pattern, of rugs, runners, carpet tiles and wall-to-wall carpet. NOTE These tolerances do not affect the functional characteristics of the floor covering.
EN 14159:2014 is classified under the following ICS (International Classification for Standards) categories: 59.080.60 - Textile floor coverings; 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14159:2014 has the following relationships with other standards: It is inter standard links to CEN/TS 14159:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 14159:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textile Bodenbeläge - Anforderungen an Toleranzen der (linearen) Maße von abgepassten Teppichen, Läufern, Teppichfliesen und Teppich-Bahnenware und des MusterrapportsRevêtements de sol textiles - Exigences relatives aux tolérances sur les dimensions (linéaires) des tapis, passages, dalles de moquette et moquettes et aux tolérances sur le raccord de dessinTextile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat59.080.60Tekstilne talne oblogeTextile floor coveringsICS:Ta slovenski standard je istoveten z:EN 14159:2014SIST EN 14159:2015en,fr,de01-marec-2015SIST EN 14159:2015SLOVENSKI
STANDARDSIST-TS CEN/TS 14159:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14159
December 2014 ICS 59.080.60 Supersedes CEN/TS 14159:2007English Version
Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
Revêtements de sol textiles - Exigences relatives aux tolérances sur les dimensions (linéaires) des tapis, passages, dalles de moquette et moquettes et aux tolérances sur le raccord de dessin
Textile Bodenbeläge - Anforderungen an Toleranzen der (linearen) Maße von abgepassten Bodenbelägen, Läufern, Fliesen und Bahnenware und des Musterrapports This European Standard was approved by CEN on 16 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14159:2014 ESIST EN 14159:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...