EN ISO 11378-2:2001/A1:2017
(Amendment)Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
Textile Bodenbeläge — Laboratoriums-Anschmutzungsprüfungen — Teil 2: Trommelprüfung — Änderung 1 (ISO 11378-2:2001/Amd.1:2017)
Revêtements de sol textiles - Essais d'encrassement en laboratoire - Partie 2: Essai au tambour - Amendement 1 (ISO 11378-2:2001/Amd 1:2017)
Tekstilne talne obloge - Laboratorijski preskusi z madeži - 2. del: Preskus z bobnom (ISO 11378-2:2001/Amd 1:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2017
Tekstilne talne obloge - Laboratorijski preskusi z madeži - 2. del: Preskus z
bobnom (ISO 11378-2:2001/Amd 1:2017)
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO
11378-2:2001/Amd 1:2017)
Textile Bodenbeläge - Laboratoriums-Anschmutzungsprüfungen - Teil 2:
Trommelprüfung (ISO 11378-2:2001/Amd 1:2017)
Revêtements de sol textiles - Essais d'encrassement en laboratoire - Partie 2: Essai au
tambour - Amendement 1 (ISO 11378-2:2001/Amd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 11378-2:2001/A1:2017
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11378-2:2001/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 97.150
English Version
Textile floor coverings - Laboratory soiling tests - Part 2:
Drum test - Amendment 1 (ISO 11378-2:2001/Amd
1:2017)
Revêtements de sol textiles - Essais d'encrassement en Textile Bodenbeläge - Laboratoriums-
laboratoire - Partie 2: Essai au tambour - Amendement Anschmutzungsprüfungen - Teil 2: Trommelprüfung
1 (ISO 11378-2:2001/Amd 1:2017) (ISO 11378-2:2001/Amd 1:2017)
This amendment A1 modifies the European Standard EN ISO 11378-2:2001; it was approved by CEN on 9 May 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11378-2:2001/A1:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11378-2:2001/A1:2017) has been prepared by Technical Committee
ISO/TC 219 “Floor coverings” in collaboration with Technical Committee CEN/TC 134 “Resilient, textile
and laminate floor coverings” the secretariat of which is held by NBN.
This Amendment to the European Standard EN ISO 11378-2:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2018,
and conflicting national standards shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norw
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.